Tender For Annexe Circuit House Extension Block At Diu
Tender Value
12.73 Crore
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
22.73 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Diu → Daman and Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annexe Circuit House Extension Block At Diu
BOQ
| Sl. No. | Item Description |
| 1 | Works |
| 2 | Civil Work : Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle |
| 3 | Earthwork for Embankment including breaking clods, dressing with all lead and lift and including watering rolling and consolidation of sub grade in layers at O.M.C. to required dry density including filling the depression which occur during the process using power roller 8T to 10T.(B) From Borrow area within 25 Km lead |
| 4 | Excavation for foundation up to 1.5m depth including sorting out and stacking of useful materials, disposing off the excavated stuff within the site at all lead, all lift/depth anywhere from the site etc.in all sorts of soil and strata, including removal of surface water etc as necessary and as directed by Engineer-in-charge. (For All kind of soil./Soft rock not requiring Blasting) |
| 5 | Excavation for foundation Depth From 1.5m to 3.0m including sorting out and stacking of useful materials, disposing off the excavated stuff within the site at all lead, all lift/depth anywhere from the site etc. in all sorts of soil and strata, including removal of surface water etc as necessary and as directed by Engineer-in-charge (For All kind of soil./Soft rock not requiring Blasting) |
| 6 | Excavation for foundation Depth From 3.0m to 5.0m including sorting out and stacking of useful materials, disposing off the excavated stuff within the site at all lead, all lift/depth anywhere from the site etc. in all sorts of soil and strata, including removal of surface water etc as necessary and as directed by Engineer-in-charge (For All kind of soil./Soft rock not requiring Blasting) |
| 7 | Excavation in Hard rock by dry-wet blasting and chiseling including dewatering preparing foundation base by proper benching and stepping and disposing of the excavated stuff within the site at all lead, all lift/depth any where from the site etc. in all Stuff removal of surface water etc as necessary and as directed by Engineer-in-charge for All Required depth as directed.(A) General blasting |
| 8 | Disposing off the un-used excavated earth for all lead and lift/ depth out side the site at non objectionable place as directed by Engineer in charge.25 Km lead |
| 9 | Filling available Excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means) |
| 10 | Providing Material and labour for Filling in plinth with coarse sand with CBR value higher than 8% under floors or base of foundation including watering ramming, consolidating and dressing etc complete as directed by Engineer in charge. 25 Km lead |
| 11 | Providing material and labour for Filling in foundation, plinth and plot Filling with murram or Selected Soil (brought from out side) CBR value higher than 8% in layers of 20cm. thickness including watering, ramming and consolidating etc complete as directed by Engineer in charge. |
| 12 | Providing Material & Labour For filling Rubble in Foundation, (Footing Base) in plinth and for plinth protection, filling, with Un screened gravel in Gaps & Consolidating Deposited Ramming and leveling the surface in layers of 20 cm thickness stone including watering, ramming well and consolidating each layer cut size stones. (Ramping by manual or mechanical means) complete as directed by Engineer in charge. |
| 13 | Providing Dewatering in all sorts of soil and soft murram, hard Murram and boulders, Soft Rock, Hard Rock including removal of surface water, water from foundation, trenches and ground water as necessary to performed construction required by the contract in accordance with the specification. |
| 14 | Providing Material & Labour For Carrying out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistent with I.S.I specification. Using Chlordane and Chiorpurfiles 20 EC. As Per 6131_Part-II Concentration Weight one percent is recommended i.e. one litre 20 EC chemical emulsion with 19 litre give 1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S |
| 15 | Providing Material & Labour For laying of Cement Concrete 1:4:8 (1-Cement : 4- coarse sand : 8) hand broken stone aggregates 40 mm nominal size in Foundation, Plinth,Excluding cost of form work, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge. |
| 16 | Providing Material & Labour For laying of Cement Concrete 1:3:6 (1-Cement : 3- coarse sand : 6) crushed stone aggregates 20 mm nominal size) in Foundation, Plinth, Pavement, Road work including cost of form work, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge. |
| 17 | Providing Material & Labour For laying of Cement Concrete 1:2:4 (1-Cement : 2- coarse sand : 4) Graded stone aggregates 20 mm nominal size in Foundation, Plinth, Pavement, Road work Excluding cost of form work, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge. |
| 18 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Foundation, Footings, base of columns, pavement, grade slab, roads and Mass concrete Below plinth & up to plinth Level Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. |
| 19 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Up To Plinth level) |
| 20 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level) |
| 21 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 22 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Three level up to Floor Four Level) |
| 23 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Four level up to Floor Five Level) |
| 24 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels Below plinth & up to plinth Level Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Bellow Plinth & up to Plinth Level ) |
| 25 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level ) |
| 26 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 27 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Three level up to Floor Four Level) |
| 28 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Four level up to Floor Five Level) |
| 29 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Bellow Plinth & up to Plinth Level) |
| 30 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level) |
| 31 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 32 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Three level up to Floor Four Level) |
| 33 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Four level up to Floor Five Level) |
| 34 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Five level up to Floor Six Level) |
| 35 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Bellow Plinth & up to Plinth Level) |
| 36 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level) |
| 37 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 38 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Three level up to Floor Four Level) |
| 39 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Four level up to Floor Five Level) |
| 40 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Stair case Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Up to Plinth & up to All Floor) |
| 41 | Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, in to Stone masonry/RCC wall , Column, beam, Slab etc (Any Height , Any floor) (with Hilti RE500 V3 injection system or Fischer FIS EM injection system or Equivalent) as per manufacturer's specification and structural consultant's specification and fixing re bar of the required diameter subsequently up to 20 mm dia. drill hole and 300mm anchoring depth. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Re bar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed re bar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge. |
| 42 | Providing Material and labour For Centering and shuttering (Exceeds 4 .O Mt.) where ever required with adequate bracing, etc. including cost of de-shuttering and decentering at all levels,including strutting, propping etc.for additional height over a height above 4.0 m, up to 5.0 m between supporting floor to ceiling including temporary brick or stone pillars for supporting as required in Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) for every additional height of 1 metre or part there of.etc. all complete as per direction of engineer in charge. |
| 43 | Providing Material and labour For Centering and shuttering (Exceeds 4 .O Mt.) where ever required with adequate bracing, etc. including cost of de-shuttering and decentering at all levels,including strutting, propping etc.for additional height over a height above 5.0 m, up to 6.0 m between supporting floor to ceiling including temporary brick or stone pillars for supporting as required in Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) for every additional height of 1 metre or part there of.etc. all complete as per direction of engineer in charge. |
| 44 | Providing Material and Labour for Core cutting work in Stone/RCC/Brick structures of maximum 400mm depth up to 150mm Dia to 250mm with required core-cutting wet drilling, fastener tools, labour and supervision etc complete. |
| 45 | Providing Material & Labour for fixing of Floor joint of 100 mm gap expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063). |
| 46 | Providing Material & Labour For Fixing of 150 mm wide Aluminium fluted strips 3.15 mm thick, sheet covering over expansion joints with iron screws as per design. complete as per direction of engineer in charge. |
| 47 | Providing Material and Labour for Thermo Mechanically Treated bar (T.M.T.) (I.S.I. Mark) conforming to I.S. - 1786 Fe-500 D Steel for R.C.C. work including bending, binding and placing in position complete.(All Floor) Make: TATA, SAIL, TISCO, RINL, JINDAL, JSW Steel or Equivalent |
| 48 | Providing Material and Labour With Fabricating & Fixing of M.S. grills Small Gate, Etc of required pattern to brick walls / Columns prepared with M.S. flats, angles, Square / round bars, square pipes, at required spacing with necessary cutting, bending, jointing, connecting, welding and / bolting and / riveting and fabricating and erecting in position etc complete for all levels as directed . The rate to include all necessary fixtures, fastening etc & Cleaning with sand papering, Cleaning Weld dots with grinder machine with smooth joint of welding, & also including one coat of primer and two coats of mat finished oil painting etc complete. hold fasts as per detailed drawing and fixing brick walls / coping / columns etc. (Oil Paint Make Asian, Narolac/MS Steel Jindal, Asian, Tata) (A) Ornamental Grill |
| 49 | Providing Material and Labour for Fabricating, assembling, hoisting/ erecting and fixing in position Structural Steel Works in required pattern/ design at all heights/ all levels/ Scaffolding/all floors/ all shapes & sizes with all leads & lifts etc. using Structural Steel like ISMC, Box Pipe, ISMB, Angle, Plates/Bright Bars,round pipes MS Sheet, Girder, Beam, cattle trap, deep threaded MS bolts etc.confirming to latest relevant IS codes for the work of steel structures , including straightening, cutting, bending, bolting and welding the members including necessary scaffolding/ staging etc. complete and comprising of Profile Cutting, Smooth grinding/ machining of edges/ faces/ all welding joints; Necessary welding; Machine drilling of holes for joining/ anchoring; dry sanding, degrease (wet cleaning) & preparation of rust free surface manually or mechanically, Fixing and erecting in position For Roof work Finch, & Main Gates, Etc as per detailed design/ drawings/ instructions. Also providing & painting with one coat of zinc chromate primer and two coats of enamel paint of Asian/ Narolac make as per Directed. providing welding electrodes of the approved make.complete with necessary labour, tools, scaffolding, platforms, props, ropes, pulleys , also Cost included of furnish and erect at all height, all required Members as per detail ,all expenses derricks, shear legs, staging, & necessary Scaffolding, loading, unloading for the proper completion of the work. Structural Steel Making from /Tata, Vizag / Asian make. The Contractor shall prepare shop drawing as per GFC drawing and as per actual site condition and get approved before execution by EIC. (Standard measurements will be paid for as actual cut length used at site) .(Brand: Tata Steel, Jindal) |
| 50 | Providing Material and labour for Laying of Masonry work using White Stone Bela masonry in up to plinth with White Bela Stone of approved quality course in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Foundation & up to Plinth Level) |
| 51 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Plinth up to Floor Two Level) |
| 52 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Two level up to Floor Three Level) |
| 53 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Three level up to Floor Four Level) |
| 54 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Four level up to Floor Five Level) |
| 55 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Five level up to Floor Six Level) |
| 56 | Providing Material and Labour for White Stone Bela masonry Partition Wall (up to 15cm th. ) work with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in Foundation & Plinth and superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Foundation & Above Plinth up to Floor Two Level) |
| 57 | Providing Material and Labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Two level up to Floor Three level) |
| 58 | Providing Material and Labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Three level up to Floor Four Level) |
| 59 | Providing Material and Labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Four level up to Floor Five Level) |
| 60 | Providing Material and Labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge. (Above Floor Five level up to Floor Six Level) |
| 61 | Providing and fixing factory made uPVC Two Track Two panels sliding window made of small series frame (40mm & above) 52 x 44 mm & sash (25mm & above) 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension, sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water,Scaffolding, Working Plateform etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 62 | Providing and fixing factory made uPVC Three Track Three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series 115mm & above x 45mm & above ) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water Scaffolding, Working Plateform etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 63 | Providing and fixing factory made uPVC Fixed window / ventilator made of (small series 39mm & above x 39mm & above ) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water, Scaffolding, Working Plateform etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 64 | Providing and fixing factory made uPVC Casement window Double Panel With French(false) Mullion made of (small series 39mm & above x 39mm & above ) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, SS fasteners 100 x 10 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water, Scaffolding, Working Plateform etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, Zinc alloy (white powder coated) handles along with zinc plated mild steel multi point locking having transmission gear with keeps for uPVC casement window,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 65 | Providing and fixing factory made uPVC Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series 115mm & above x 45mm & above) frame 116 x 45 mm &(44mm & above sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension sliding glazed door comprising of uPVC multi chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) crescent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water, Scaffolding, Working Plate form etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 66 | Providing Material & labour For Structural Glass Glazing of Semi Unitized Glazing of 67 mm thick Metallic Finish Aluminium Frame Work of approved brand having Shutters of 24 DGU (6mm ST Series Reflective HS+ 12mm AG + 6mm Clear HS) having pattern and brand as approved by the Architect including fixing of all accessories of approved brand as per detailed drawing / as directed by Engineer In-charge etc. complete. |
| 67 | Providing and fixing Glazing With float Glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 68 | Providing and fixing glazing With float glass panes of 8 mm thickness (weight not less than 20kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and as per the directions of engineer-in-charge . |
| 69 | Providing Material and Labour With fixing of 12 mm thk.Single Shutter Toughened Glass door with edge polished fixing with first quality patch fitting double action floor springs on shutter at bottom efficient Dorma/ Ozone Make (Heavy duty) fixed into floor (including cutting for floor and repairing afterwards), with Two pairs of 600 mm long 25 mm dia Matt finished SS handles, two pair of concealed shoot bolts 250 mm long and pin type narrow style lock,/ Mortise lock (as per drawing) on shutter with all necessary hardware. complete as per the drawing & design or as directed Eng-in charge. (All accessories brand : Dorma, Ozone, As per Consultant Selection) |
| 70 | Providing Material and Labour With fixing of 12 mm thk.Double Shutter Toughened Glass door with edge polished fixing with first quality patch fitting double action floor springs on each shutter at bottom efficient Dorma/ Ozone Make (Heavy duty) fixed into floor (including cutting for floor and repairing afterwards), with two pairs of 600 mm long 25 mm dia Matt finished SS handles, two pair of concealed shoot bolts 250 mm long and pin type narrow style lock/ Mortise lock (as per drawing) on Each shutter with all necessary hardware. complete as per the drawing & design or as directed Eng-in charge.(All accessories brand : Dorma, Ozone, As per Consultant Selection) |
| 71 | Providing and fixing Paneled and glazed Single / Double shutters for open-able Doors,fixed Window & Made from 38mm thk 1st Class teak wood Planks As per Approved By architect & fixing with SS hinges of required size with necessary screws, & All Necessary hardware SS 316 handle, Stoppers etc , all complete as per direction of Engineer-in-charge Cost including for Melamine Polish & Required Beading Putty, Middle Putty as per Drawing & also including Providing & fixing of 5mm Glass As per Drawing. : Teak wood : 38mm thick shutter (type of wood BURMA TEAK as approved by architect or engineer in charge) |
| 72 | Providing Material and Labour With fixing of 35 mm thick Flush Door Single Shutters (Laminate Finish) Filled with country wood, Water Proof Single Shutter Cladding with 1 mm thk. High End laminate on Both side of the Door Shutter. The door with Lipping edging Patti with Melamine Polishing all around the door as per directed . The door would have accessory like 2 Nos pull SS Handles in Brush finish of the size 25mm diameter, 600mm Long made from anti corrosive high grade AISI 316 stainless steel. also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame , SS Stoppers,wall catch etc (on each shutter as per drawing) & also Provide Hydraulic door closer bottle type M.S. body (Heavy duty) or Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 900mm x 2400mm) |
| 73 | Providing Material and Labour With fixing of 35mm thick Flush Door Double Shutters (Laminate Finish) Filled with country wood, Water Proof Single Shutter Cladding with 1 mm thk. High End laminate on Both side of the each Door Shutters. The door with Lipping edging Patti with Melamine Polishing all around the door as per directed The door would have vision glass panel with 5mm glass including cutting, fixing all where required. The door would have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, 300 mm long made from anti corrosive high grade AISI 316 stainless steel on Each shutter . also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame , SS Stoppers,wall catch etc (on each shutter as per drawing) & also Provide Hydraulic door closer bottle type M.S. body (Heavy duty) or Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 1500mm x 2400mm) |
| 74 | Providing Material and Labour With fixing of 40 mm thick Flush Door Single shutter (Veneer Finish) filled with country wood, water proof Flush door Single shutters Cladding with 4 mm Thk Approved Shed Veneer sheet (Brand: Greenlam, Century ply) on both side of the door Finished with Melamine polish & Lipping edging patti all around the door & Finished with Melamine polish. The door would have vision glass panel with 5mm glass including cutting, fixing all where required. The door with also have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, 600mm long made from anti corrosive high grade AISI 316 stainless steel on Each shutter . also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame SS Stoppers,wall catch etc (on each shutter as per drawing) & also Provide Hydraulic door closer bottle type M.S. body (Heavy duty) or Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 900mm x 2400mm) |
| 75 | Providing Material and Labour With fixing of 40 mm thick Flush Door Double Shutter (Veneer Finish) Filled with country wood,water proof Flush door Double shutters Cladding with 4 mm Thk Approved shed Veneer sheet (Brand: Greenlam, Century ply) on Both side of the each door Shutters Finished with Melamine Polish & Lipping edging patti all around the door & Finished with Melamine polish. The door would have vision glass panel with 5mm glass (Each shutter) including cutting, fixing all where required. The Door would have accessory like 2 Nos pull SS Handles in Brush finish of the size 25mm diameter, 600mm Long made from anti corrosive high grade AISI 316 stainless steel on Each shutter, also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt,with fixing SS heavy duty screws to the frame, SS Stopper,wall catch etc (on each shutter As per Drawing)& also Provide Hydraulic door closer bottle type M.S. body (Heavy duty) or Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 1500mm x 2400mm) |
| 76 | Providing and fixing of Top Mounted Manual Single Side Sliding door Made from 35mm Thk Flush door & Finish with approved 1mm thk.Laminate finish on both side. sliding top mounted Sliding Track Dorma make or as per approved Make Complete with all required Accessory, handle, stoppers etc. |
| 77 | Providing Material and Labour for wood work in Frames of doors, windows, louvers clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be included & Melamine polishing As per Drawing ). First class Burma teak wood as approved by architect or engineer in charge) |
| 78 | Providing Material & Labour and fixing of Rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation including the cost of hood cover and spring etc. complete as directed by engineer-in-charge. (B) Shutters having width 3.5 M. and above |
| 79 | Providing Material and Labour With Laying of Polished Granite slab 18-20 mm (Average) thick for Sill & Jambs for Door, Windows, Ventilators, Openings, Elevation Cut-outs, Compound Wall Top, Planter Cladding etc. as per design and Drawings incl. full molded round both edge on 10 mm thick cement mortar 1:3 (1 -cement : 3 coarse sand ) & polymer chemical Adhesives:Laticrete etc, jointed with Grey cement slurry including rubbing and polishing etc.complete.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 80 | Providing Material and Labour With Laying of Polished Granite stone slab 16-18 mm thick for skirting, Wall Dado,pillars,Lift wall Cladding etc. Fixed with Laticrete 325 as per directed by Engineer in-charge (Polymer Chemical adhesive : Laticrete 325 Required Chemical adhesive 4kg to 5kg / Sq Mt) on 10 mm thick cement Plaster 1:3 (1 -cement : 3 coarse sand ) and jointed with Grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 81 | Providing Material and Labour With Laying of Italian Marble Flooring 18-20 mm thick slab. Flooring Size 600mm x 600mm /900x900 or as per Drawing and fixing as per Directed by Engineer in-charge) for Passage or any Space as per Drawing. including 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) & laid on New Surface of Floor By Adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) including rubbing and polishing etc. complete.Marble shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 82 | Providing Material and Labour With Laying of Leather Finished Granite Flooring 18-20 mm thick stone slab. Flooring Size 600mm x 600mm or as per Drawing and fixing as per Directed by Engineer in-charge) for Passage or any Space as per Drawing. including 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) & laid on New Surface of Floor By Adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) including rubbing and polishing etc. complete.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 83 | Providing Material and Labour With Laying of Leather Finished Granite stone slab 18-20 mm thick (Single piece 180 cm to 200cm in length) for stair steps and riser as per design incl. Sandwich Edge (Double stripe) at front & Side edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand) and risers on 10 mm thick cement Plaster 1:3 (1 -cement : 3 coarse sand ) and jointed with cement slurry and pointing with Coloured cement slurry admixed with Polymer Chemical adhesive: Laticrete 325 matching shade. including rubbing, curing and polishing etc.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge Also Provide Anti Slip Groove on Stair Steps as per Drawing complete as per direction of Engineer In-charge. |
| 84 | Providing Material and labour with fixing of Lather Finished Granite Stone slab 18-20 mm thick for skirting, Wall Dado,pillars, wall Cladding etc. Fixed with Laticrete 325 as per directed by Engineer-in-Charge (Polymer Chemical adhesive : Laticrete 325 Required Chemical adhesive 4kg to 5kg / Sq Mt) on 10 mm thick cement Plaster 1:3 (1 -cement : 3 coarse sand ) and jointed with Epoxy Grout pigment to match the shade of slab including rubbing and polishing etc.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge complete. |
| 85 | Providing Material and Labour With Laying of Polished Kota stone slab (600mm x 600mm or as per drawing or As per Directed) 25mm (Average) thick laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand) jointed with cement slurry and pointing with Grey cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as per direction of Engineer In-charge. |
| 86 | Providing Material and Labour With Laying of Polished Kota stone slab 25mm (Average) thick in risers of steps,skirting Dado and pillars laid on 10 mm thick cement mortar 1:3 (1 -cement : 3 coarse sand) jointed with Cement slurry and pointing with Grey cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as per direction of Engineer In-charge. |
| 87 | Providing Material and Labour With Laying of 120 cm x 60 cm Glossy/ MATT finished (Full Body Vitrified Tiles Flooring (9 to 10mm thk.Make RAK, Johnson,Simpolo Nexion). Flooring work over 20 mm (average) base of cement mortar 1:4 ( 1 cement: 4 coarse sand) on new surface of floor by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning and finishing the surface etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 915/ Sq Mt) |
| 88 | Providing Material and Labour with laying of 120cm x 60 cm Glossy / MATT finished (Full Body Vitrified Tiles Wall Dado (9 to 10mm thk.Make RAK, Johnson,Simpolo Nexion). of approved shade in skirting, risers of steps and Wall dado on 10 mm thick cement plaster 1:3 (1 Cement : 3 coarse sand) & by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing and jointed with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 915/ Sq Mt) |
| 89 | Providing Material and Labour with laying of 60 cm x 60 cm (9mm thk) Flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismantling of existing flooring and jointed with colour cement slurry including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete. (RAK, Johnson,Simpolo, Kajariya ) (Basic Rate of tiles Rs 430sq Mt) |
| 90 | Providing Material and Labour with laying of 60cm x 60 cm Vitrified Tiles 9 to 10mm thk. approved Make & shade in skirting, risers of steps and Wall dado on 10 mm thick cement plaster 1:3 (1 Cement : 3 coarse sand) & by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing and jointed with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete. (Basic Rate of tiles Rs 430sq Mt) |
| 91 | Providing Material and Labour With Laying of 300mm x 300mm Glossy/ MATT finished Decorative Moroccan Vitrified Tiles (Make RAK,Kajaria,Simpolo) of approved shade Flooring over 20 mm (average) base of cement mortar 1:4 ( 1 cement: 4 coarse sand) on new surface of floor by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) including Rubbing, Cleaning and finishing the surface etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 860/ Sq Mt) |
| 92 | Providing Material and Labour With Laying of 300mm x 300mm/ 100mm x100mm Glossy/ MATT finished Decorative Moroccan Vitrified Tiles (Make RAK,Kajaria,Simpolo)of approved shade in skirting, risers of steps and Wall dado over 10 mm (average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand) & by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing and jointed with Approved Epoxy Grout, Rubbing, Cleaning etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 860/ Sq Mt) |
| 93 | Providing Material and Labour with laying of 900mm x 900mm Glossy/ MATT Vitrified Tiles Wall Dado (Tiles 8 to 10mm thk.Make RAK, Johnson,Simpolo Nexion) of approved shade in skirting, risers of steps and dado on 10 mm thick cement plaster 1:3 (1 Cement : 3 coarse sand) & Polymer Chemical adhesive , Laticrete 325 or equivalent and jointed with (Polymer Chemical adhesive: Laticrete 325) including filling the joints with in 3-4 mm width and10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning and finishing the surface etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 1000/ Sq Mt) |
| 94 | Providing Material and Labour for 10mm thick cement plaster in single coat on Slab ceiling surface for plastering finished level and smooth including curing, scaffolding etc. complete in C:M (1 cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Engineer in charge Complete.Above Plinth to All Floor |
| 95 | Providing Material and Labour for 15mm thick cement plaster in single coat on brick, concrete wall surface for plastering finished even and smooth including curing scaffolding etc. complete in C:M 1:4 (1 cement : 4 fine sand ) and finished with floating coat of neat cement slurry also Fixing of GI mesh at all Horizontal & Vertical junction of Rcc Column/ beam & Brick work as directions of Engineer in charge Complete.Above Plinth to All Floor |
| 96 | Providing Material and Labour for 15 mm thick water proof cement plaster using water proofing powder 1Kg/1 bag of cement for all floors on brick / concrete wall work using water proofing materials in C M 1: 3 ( 1 cement 3 coarse sand) including finishing with a floating coat of neat cement slurry etc complete for Above Plinth to All Floor |
| 97 | Providing Material and Labour for 20 mm thick double coat mala cement plaster on exterior/ interior, brick / concrete work walls up to any height for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trowel including scaffolding curing etc. complete. |
| 98 | Providing Material and labor for 20 mm thick rough finished (Sand Face) cement plaster on walls up to any height consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8 mm thick rough finishing coat of C.M. 1:1 (1-cement : 1-sand) on exterior brick / concrete work for (Area As per Directed) complete. For plastering bellow & above plinth up to all Floor complete. as directions of Engineer in charge Complete.(All Floor including Scaffolding) |
| 99 | Providing throating or plaster drip groove 10 x 10 MM and moulding to RCC Chhaja and horizontal surfaces. |
| 100 | Providing material and labour for fixing G.I. hexagonal chicken mesh of size 16mm x 24mm of 22 gauge at junction of concrete and brick work or between different materials after making \\"V\\" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary \\"U\\" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge. |
| 101 | Providing & Applying 12 to 15 mm th. Plaster of Paris layers on wall plastered surface & surface of required or directed by Eng- in charge including hacking finishing smooth, with proper level & handed over a clean & neat condition complete. The finished surface should be smooth and in perfect level so as to avoid un evenness and ready to take on paint. complete the work should be done as per directed by engineer in charge. (All Floor) |
| 102 | Providing material & labour for Ceiling painting (two coats) with plastic Emulsion paint of approved brand and manufacture on un decorated Ceiling surface to give an even shade including With applying Two coats of wall care Putty & two coat of primer thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete.(All Floor including Scaffolding) Make: Asian Paint, Dulex, Nerolac, Berger Jotun or equivalent./ Wall Care Putty Birla White.Asian Paints, JK,Berger paint, Nerolac or equivalent |
| 103 | Providing material & labour for Wall painting (two coats) with plastic Emulsion paint of approved brand and manufacture on un decorated wall surface to give an even shade including With applying Two coats of wall care Putty & two coat of primer thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete.(All Floor including Scaffolding) Make: Asian Paint, Dulex, Nerolac, Berger Jotun or equivalent./ Wall Care Putty Birla White.Asian Paints, JK,Berger paint, Nerolac or equivalent |
| 104 | Providing Material & Labour For Two coats of Primer and Two coats of Archi Concrete Pattern Texture on Exterior Surfaces at all heights.including cleaning, Preparing the surface,Scaffolding, Staging etc as per direction.Base Preparation - (a) Clean the surface and ensure it is free from algal and fungal growth and seepages post which apply Exterior Wall Primer (b) Applying 1st Coat , after Dry of surface & Applying 2nd Coat of Primer and suitable finishing to the complete satisfaction of the Engineer in Charge.Archi Concrete Application -(c) Apply 1st coat of Archi Concrete paste form on the primed surface using a steel trowel. Allow it to dry for 45 mins to an hour. Apply 2nd coat of Archi Concrete paste when the 1st coat is in semi-dry condition. Make the desired pattern using requisite tools. Allow it to dry for 5-10 mins. Buff the surface using a Steel Trowel. Excess buffing will flatten the surface & pattern will not visible. Buff the surface gently.& Proper curing in between the two subsequent coats.Applying Approved Exterior Paint (d) After 6 to 8 hrs of complete drying, apply the 1st coat of Exterior Paint As per Approved Shed (tinted and diluted by maximum 30%) and then apply tinted 2nd coat using CW sponge in the direction of the pattern (Vertical & Horizontal). Clean excess material using wet CW Sponge. In hot & dry climatic conditions, wet the surface with water before applying 2nd top coat to avoid section lines.Touch ups to the paint after the scaffolding is removed, (e) All measurements for paints to be as per IS-1200. f) Minimum Guarantee of Ten Years Waterproofing and Paint performance for all external paints by manufacturer.Rate shall be inclusive of the cost of scaffolding , staging, plate form, Tools, Labour , Material, all lead & Lift etc .Also Make Three Sample of size 1.0 x 1.0 (without Any Extra Payment ) as per Directed Texture Finish & Paint shade As per Approved & Selection by Consultant or Directed by Eng -in Charge. Make - Asian Paint / Jotun Jotashield Tex Fine OR Equivalent |
| 105 | Providing Material & Labour for applying Painting two coats (Including priming coat) on new steel and other metal surface with Enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter.& also Applying priming coat over new steel and other metal surface with ready mixed priming paint brushing red lead. Rate shall be inclusive of the cost of scaffolding Complete as per Directed by Engineer In charge. |
| 106 | Providing Material & Labour for applying Two coats of abduct cured modified Epoxy marine paint of 150 micron each and 50 micron top coat of acrylic Pu finish. Including surface preparation by dry abrasive blasting of 45 to 60 microns with cleaning and removal of all dirt, grease, varnish, paint or any other foreign matter, including thinner and all accessories. Sample to be approved before starting of the work by Architect/ EIC. Rate shall be inclusive of the cost of scaffolding.Staging, platform for any height (Brands: Jotun) |
| 107 | Providing and fixing Gypsum False ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45 x15 x 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffuser, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge Gypsum moisture resistant board. (Cost including For suspended from RCC Ceiling /Roof, Floor Protection covering , light cutting gala & also including Scaffolding & Working Platform for any height) |
| 108 | Providing Material & Labour for laying of water proofing treatment Terrace Area by Brick Batt Laying (a). Applying neat cement slurry 2.75 kg/m2 of cement admixed with water proofing compound after cleaning the surface. (b). Laying of bricks bats of 25 to75 mm size in CM 1:5 (1 cement : 5 course sand) admixed with water proofing compound over 20mm thick layer of cement mortar 1:5 to required slop including rounding of junctions of walls and slab with spacing not more than 30mm.(c) After two days of proper curing applying a second coat of cement slurry and cured for another two days. (d) Finishing the surface with 20mm thick cm 1:4 and cured for two days with required levels and slope including rounding of junctions at walls,curing etc.As directed and specified.Water pond should be carried out for a period of Seven days as directed by EIC.cement slurry admixed with approved water proofing compound (FosRoc / BASF / Dr. Fixit). |
| 109 | Providing Material & Labour for water proofing treatment in sunken portion of WC, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/Sq.Mt. mixed with water proofing cement compound @ 0.253 kg/ Sq.Mt.. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/Sq.Mt. mixed with water proofing cement compound @ 0.126 kg/Sq.Mt.. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 110 | Providing Material & Labour for cement Vata (10 cm X 10 cm size) quarter round in Cement Mortar 1:1 including neat cement finishing, watering etc complete. |
| 111 | Providing Material & Labour for laying Broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out up to surface using white cement including rounding off junctions and extending them up to 15 cm along the wall, clearing with water and oxalic acid etc. as directed. |
| 112 | Providing Material Labour for Constructing Sandwich Platform (600mm Width) Engineered quartz stone. Counter made from mm thick Polished Engineered quartz stone at top Counter to be made out of sandwich type construction with base in kadappah / Kotah stone 30mm thk Kotah stone slab flooring (15mm thick base cement mortar 1:4 ) fitting at bottom with cementing Materials / adhesives including making necessary grooves in walls & overlaid in Engineered quartz stone 75mm wide facia on three exposed sides. Counter to be held on to concealed MS brackets , all labour material of approved quality incl. full molded round front edge, Cost included necessary cut outs to take basin /S S sink and to take necessary Pipes as per detail drawing.& Including 19 mm th. BWP specified ply with both side laminated Shutters & Drawers With necessary hardware as per drawing |
| 113 | Providing Material Labour for Fixing of Polished Engineered quartz stone 15mm thk of approved quality and Shade incl. full molded round front edge fixed in wall for Urinal partitions and jointed with Grey cement slurry including rubbing and polishing etc. complete |
| 114 | Providing Material and Labour with fixing of stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. |
| 115 | Providing and fixing Free standing, frame less Glass Railing Systems a classically modern / the Traditional look wet-glaze installation method is a tried and true process that firmly secures the glass into the SS base shoe. Mount the shoe directly to the floor or side mount as a facia-mount.& Top Horizontal Flush Channel Tube & fixed 12mm thk.toughened Glass between top & base rail with stainless steel (Grade 316) Railing system of approved make & Top Slim Rail with hollow section tubes, square, Round, Rectangle etc with base plate Cover cap, finishing accessories, size as per drawing. Railing shall be top mounted or side/ wall mounted. Railing shall be fixed with SS 316 grade anchor fastener of required size and as per fixing position of approved make. No Welding OR Fabrication shall be allowed at site. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architect. Contractor shall protect railing system up till handling over the project. |
| 116 | Providing and fixing stainless steel (Grade 304 Hand Railing ,(Single Pipe Rail) bump rail, guard rail, with Wall Support Clamp system made of Hollow tubes, finishing accessories, infilled holding brackets, fixing accessories etc. for any type of design, shape (plain/ curvature), size as per drawing. Railing shall be side wall mounted. Railing shall be fixed with SS 304 grade anchor fastener of required size and as per fixing position of approved make.Hand rail 50mm Dia Round Hollow Pipe 16 Gauge & Pipe Holding accessories every 900mm c/c or (as per drawing) at Wall with Fabricated or Connector joint Hollow sections are 1.6mm Thickness Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architect. Contractor shall protect railing system up till handling over the project. |
| 117 | Providing and fixing precast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concrete as per approved design and including excavation/ re filling/ PCC 1:2:4 for fixing in proper line and level,filling the joint with C:M 1:3 (1 cement:3 fine sand) etc complete as per directed . |
| 118 | Providing and fixing precast Rubber Dye / Steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pneumatic compressed by Vibrated mechanically pressed and as per approved design Confirming to IS 15658 2006 including 75mm Sand layer for leveling and filling the joint with sand in proper line and level as per guidelines of IRC : SP 63-2018 etc complete. |
| 119 | Demolishing R.C.C. work manually/ by mechanical means including stacking of Steel bars, serviceable materials and disposal of unserviceable materials with all lead and lift. as per direction of Engineer - in- charge. |
| 120 | Demolition of Brick work and stone masonry,concrete block work manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.as per direction of Engineer - in- charge. (In Cement Mortar) |
| 121 | Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.as per direction of Engineer - in- charge. |
| 122 | Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift as per direction of Engineer - in- charge. |
| 123 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 124 | Dismantling roofing including ridges, hips, valleys and Gutters ,GI Ducting, Kitchen Gi Exhaust Duct Etc & stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.Including with necessary labour, tools, scaffolding, platforms, props, ropes, pulleys Etc As per Directed |
| 125 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 126 | Supplying, stacking and spreading of good earth at site including royalty and carriage up to 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). including to loading , unloading and transport etc. |
| 127 | Supplying , stacking and spreading sludge / well decayed farm yard manure from the source approved by the engineer in charge incl. screening, loading, unloading, conveyance and stacking at site. |
| 128 | Mixing earth and manure or in proportion specified or directed, Spreading of dung manure or / and good earth in required thickness. and fine dressing the ground as per natural gradient/ slope provided by the landscape architect |
| 129 | Lawn plantation Selection : In rows 1 to 2 cm apart in either direction including watering, fertilizing and maintenance of the lawn for 2 months or more till the grass form a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately) . Maintaining the grass for the period of two months in a presentable condition involving all the operations of de-weeding , application of chemical fertilizer, watering, mowing ,rolling etc. |
| 130 | Plumbing & Sanitary Work : Supply,checking, storing and fixing S. S. sink, single bowl with tap point on wall / counter comprising of Concealed type brackets fixed to wall with adjustable clamp to push against counter rim,40 mm heavy plated C.P. waste coupling JAQUAR-ALD-729 fitting without pop-up,with flexible PVC pipe with connector,CP swan neck sink faucet model JAQUAR-LYR-38347S Painting brackets with two coats of white enamel paint over one coat of primer,table mounted / wall mounted.Kitchen sink with drain board)(model :Nirali-olympia or equivalent) (Final Model of fixture to be selected by architect) |
| 131 | Supply, checking, storing and fixing in position European water closet comprising of Wall hung European W.C. Pan Model KOHLER-K-16717IN-SS-0 in white colour with outlet connector (k-1046327-s) , on approved type of chairs,Concealed flushing cistern Model No.Geberit Omega Concealed Cistern with Flush plate or Equivalent or Equivalent as directed,C.P health faucet Model No. JAQUAR-ALD-557 or Equivalent with required length of flexible tube, clamp and bracket for fixing to wall,15 mm C.P. brass heavy quality angle stop cocks Model No.JAQUAR-JAQUAR-ALI-85053 or Equivalent for flushing cistern,C.P. brass 2-way bib cock Model No. JAQUAR-OPP-15041PM or Equivalent,CP Toilet paper holder Model JAQUAR-ACN-1151N or Equivalent,Solid bakelite water closet cover and seat with C.P. hinges and rubber buffers,Fixing W.C. unit with brackets and accessories in position,Necessary pipe connection to PVC / PP / CI soil pipe,Painting bracket with two coats of white enamel paint over a coat of primer. (Final Model of fixture to be selected by architect) |
| 132 | Supply, checking, storing and fixing Under Counter wash hand basin MODEL:K-2215IN-2-0 ith ,32 mm heavy plated C.P. waste coupling JAQUAR-ALD-729 fitting with pop-up,32 mm heavy plated C.P. bottle trap JAQUAR-ALD-769L250x190 with cleaning eye with extension piece and wall flange,Painting brackets with two coats of white enamel paint over one coat of primer,CP Basin Faucet K-5683IN-4ND-CP with 15 mm C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 mm) made to measure. (Final Model of fixture to be selected by architect) |
| 133 | Supply, checking, storing & fixing C.P. brass Towel ring MODEL:JAQUAR-ACN-1121BN Round to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required . (Final Model of fixture to be selected by architect) |
| 134 | Supply, checking, storing & fixing C.P. brass Angle valve for basin & Sink MODEL:JAQUAR-ALI-85053, of approved quality conforming to IS:8931 for a) 15mm Nominal Bore (Final Model of fixture to be selected by architect) |
| 135 | Supply, checking, storing & fixing CP Over Head shower MODEL:JAQUAR-OHS-CHR-35497 with Hot cold divertor JAQUAR ALD-CHR-065M concealed part JAQUAR QQP-CHR-7065MKPM and bath spout JAQUAR SPJ-CHR-15463PMcomplete as per instructions of the engineer-in-charge. |
| 136 | Supply, checking, storing & fixing of Heavy class S.S. Grating Model No. Chilly-CCT-SFC-127 or Equivalent with Mosquito /Cockroach proof S.S. strainer of approved design by Interiror including setting in floor with cement motor to match with floor finish as per architect requirement suitable for FD (Floor drain) and FT (Floor trap). Note : Size of trap is vary as per final Product Selection. (Including Shaft floor Drain & Fire Escape Balcony ) |
| 137 | Supply, checking, storing & fixing of free standing with Chrome Over Flow, Waste & Legs bath tab jaquar-JBT-WHT-FSBTMAD1778 with necessary equipments like taps hand showers and faucets .. |
| 138 | Providing and Erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. |
| 139 | Supplying & erecting Reverse Osmosis (RO) water purification system with M.S. powder coated pedestal frame, prefilter housing carbon filter suitable buster DC pump, auto low & high pressure switches with following size of LPH capacity & erected as directed [D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10\\"x54\\" - (1 No), Micron cartridge filter 20\\" x 2.5\\" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40 - (1No), RO pressure tube 4\\" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate 50%. |
| 140 | Providing and fixing PVC SWR Pipe confirming to IS 13592-92 TYPE B and fitting as per IS 14735-99 for SOIL & WASTE water discharge, including all fittings with and with out inspection doors, including supports brackets as per supplier specification and distance, cutting, chases /holes in walls/floors/slab etc. (Pipes to laid in Toilets)(Make:Astral,Ashirvad,Suprime) 75 mm |
| 141 | Providing, laying and jointing in true line and level 110 dia U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diaR.Mt. x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. |
| 142 | Providing, laying and jointing in true line and level 160 dia U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diaR.Mt. x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. |
| 143 | Providing and fixing PVC Agri 6Kg/cm2 and fitting for SOIL & WASTE water discharge, including all fittings with and with out inspection doors, including supports brackets as per supplier specification and distance,cutting, chases/holes in walls/flors/slab etc. (Pipes to laid in Toilets)(Make:Astral,Ashirvad,Suprime)50mm |
| 144 | Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. |
| 145 | Providing and fixing in position Multi Floor Trap/Plain Floor Trap self cleansing design moulded or fabricated with 50 mm water seal conforming to IS:14735-90 including setting the trap in 1:2:4 cement con'crete etc. (Make:Astral,Ashirvad,Finolex) 100mm Outlet |
| 146 | Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. |
| 147 | Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. |
| 148 | Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. |
| 149 | Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. |
| 150 | Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two R.Mt. C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. |
| 151 | Providing, fixing, jointing and testing in position the following U-PVC pressure threaded Pipes as per ASTM D 1785 Schedule 80 and threaded conforming to IS:554. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc. The pipes & fittings shall be tested to a pressure of 15 Kg/Sq.cm. Fixing at wall/ ceiling level supported by clamps, fastener, hangers etc. as per specification. Cutting hole in wall / floor slab and making good the same with cement concrete 1:2:4 complete as required. GI heavy class pipe sleeve of larger diameter shall be provided wherever the pipes crossing the walls/floor slab and sealing the sleeves as per consultants requirement. Threading, jointing & making proper connections & as per provided drawings by architect,techincal specification and as directed by the authority EIC.(Water Supply Riser & Main Ring) (make:Astral,Ashirvad & supreme) 65 mm nominal outer dia Pipes ( SCH 80 ) |
| 152 | Providing and fixing forged brass lever operated Ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect. 25mm dia |
| 153 | Providing and fixing forged brass lever operated Ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect. 32mm dia |
| 154 | Providing and fixing forged brass lever operated Ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect. 40mm dia |
| 155 | Providing and fixing forged brass lever operated Ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect. 50mm dia |
| 156 | providing and erecting Butterfly Valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified 65 mm dia. |
| 157 | Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 250mm |
| 158 | Providing, laying, jointing and testing heavy quality DWC (Double wall Corrugated ) under ground application pipes for Sewer and strom line with Snap-Fit Coupler with Rubber Ring / In-line Socket Molded Coupler / Socket-Spigot Arrangement fittings of SN8 class of approved make laid to required alignment and slope trenches inclusive of excavation in all soil types, bailing or pumping out water from trenches, shoring, whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 100 meters as directed incl. 150 mm dia |
| 159 | Providing, laying, jointing and testing heavy quality DWC (Double wall Corrugated ) under ground application pipes for Sewer and strom line with Snap-Fit Coupler with Rubber Ring / In-line Socket Molded Coupler / Socket-Spigot Arrangement fittings of SN8 class of approved make laid to required alignment and slope trenches inclusive of excavation in all soil types, bailing or pumping out water from trenches, shoring, whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 100 meters as directed incl. 200 mm dia |
| 160 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design b)150 mm dia diameter |
| 161 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design c) 200mm dia diameter |
| 162 | Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton) |
| 163 | Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 800mm and 0.9M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 R.Mt. for 150mm diameter sewer. |
| 164 | Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 R.Mt. for 150mm diameter sewer. |
| 165 | (I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M. |
| 166 | (II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof over item No.24.27 (I) for depth from 1.50M. to 2.25M. |
| 167 | Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete. |
| 168 | Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (more than 10 ton) |
| 169 | Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.complete. [B] 20 mm. |
| 170 | Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.complete. [C] 25 mm. |
| 171 | Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32 mm. |
| 172 | Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.complete. [E] 40 mm. |
| 173 | Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.complete. [F] 50 mm. |
| 174 | Supplying & erecting resin bonded flap rock wool / glass wool with conductivity valve 1.67 sq.mm per watt & to with stand the temp. to 100 degree centigrade C thickness 50mm with G I pipe of following size dia \\"B\\" class as per IS:1239. The plastic sheet to be used as covering of glass wool. Al. cladding besides other materials like chicken mesh, 26 G Al. Sheet shall be used for cladding the insulation pipe. (A) for 20 mm dia pipe |
| 175 | Supplying & erecting resin bonded flap rock wool / glass wool with conductivity valve 1.67 sq.mm per watt & to with stand the temp. to 100 degree centigrade C thickness 50mm with G I pipe of following size dia \\"B\\" class as per IS:1239. The plastic sheet to be used as covering of glass wool. Al. cladding besides other materials like chicken mesh, 26 G Al. Sheet shall be used for cladding the insulation pipe. (B) For 25 mm dia pipe |
| 176 | Supplying & erecting resin bonded flap rock wool / glass wool with conductivity valve 1.67 sq.mm per watt & to with stand the temp. to 100 degree centigrade C thickness 50mm with G I pipe of following size dia \\"B\\" class as per IS:1239. The plastic sheet to be used as covering of glass wool. Al. cladding besides other materials like chicken mesh, 26 G Al. Sheet shall be used for cladding the insulation pipe. (C) for 32 mm dia pipe |
| 177 | Supplying & erecting resin bonded flap rock wool / glass wool with conductivity valve 1.67 sq.mm per watt & to with stand the temp. to 100 degree centigrade C thickness 50mm with G I pipe of following size dia \\"B\\" class as per IS:1239. The plastic sheet to be used as covering of glass wool. Al. cladding besides other materials like chicken mesh, 26 G Al. Sheet shall be used for cladding the insulation pipe. (D) for 40 mm dia pipe |
| 178 | Supplying & erecting resin bonded flap rock wool / glass wool with conductivity valve 1.67 sq.mm per watt & to with stand the temp. to 100 degree centigrade C thickness 50mm with G I pipe of following size dia \\"B\\" class as per IS:1239. The plastic sheet to be used as covering of glass wool. Al. cladding besides other materials like chicken mesh, 26 G Al. Sheet shall be used for cladding the insulation pipe. (E) for 50 mm dia pipe |
| 179 | Providing and fixing gun metal Non- Return valve of approved quality (screwed end) : 50 mm nominal bore Horizontal |
| 180 | Providing and fixing gun metal Non- Return valve of approved quality (screwed end) :40 mm dia. |
| 181 | Providing and fixing gun metal Non-Return valve of approved quality (screwed end) :32 mm dia. |
| 182 | Providing and fixing gun metal Non-Return valve of approved quality (screwed end) :25 mm dia. |
| 183 | Variable Speed Hydro-booster System for domestic water supply :Compact self contained Hydro-booster system comprising of following :In-line, vertical multistage, centrifugal clear water pumps with SS-316L /304 casing, S.S 3I6L impeller and SS-304/316 shaft, SS-316L/C.I. Base CED coating & head TEFC IE3/IE4 magnetic motor with mechanical seal with Company fitted with company compliance certificate. Vendor to submit performance curves and technical catalogue with all GA Drawing of the proposed model for review and information.Panel mounted PLC and HMI Based multi pump controller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a Panel/Inbuilt with pump motor with IP54 class with pressure sensor transmitter (each pump each VFD), diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. All alarms should be displayed in the controller. System should be equipped with dry running protection by both, reputed make Float (NO/NC) having 20 Mtrs Submersible Cable installed in the Tank & 0-10V DC Device installed on Suction Header. Indication of all type of faults / on-off status / electrical parameters shall be available on panel and central IBMS monitors. On-off operation for all pumps shall be available on BMS system.Global / Equivalent Make Pre-charged diaphragm pressure vessel with 3 years warranty from manufacturing date and company tested replaceable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be following capacity or as per manufacturer recommendation). Vessel Shall be pre-charged with Nitrogen as per respective Pump Head. Each Vessel shall be installed with 2 1/2\\" SS 304 Glycerine Filled Manometer on Top.Set of accessories such as SS 304 / MS with CED Coated headers for suction and discharge, control valves, non return valves, pressure transducers, pressure gauge, inter connecting power and control cabling etc. complete.Domestic Water Booster PumpFlow:200 LPMHead:25m1 Set = 2 Nos. Pump (1 Working + 1 Standby - cascade operation)Suction head - flooded positive suction |
| 184 | Electrical Work : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SINGLE POLE |
| 185 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DOUBLE POLE |
| 186 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. TRIPLE POLE & NEIUTRAL |
| 187 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 188 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A |
| 189 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.125 A, 16 KA,TPMCCB |
| 190 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 250 A, 25 KA,TPMCCB |
| 191 | Providing and fixing M.V. danger notice plate of 200mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides,and with inscription in single red colour on front side as required. |
| 192 | Providing and fixing H.T. danger notice plate of 250 mm x 200mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. |
| 193 | Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. |
| 194 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door |
| 195 | Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A |
| 196 | Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6A Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete |
| 197 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a) 4 core 2.5 Sq. mm |
| 198 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a-1) 4 core 4 Sq. mm |
| 199 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(B) 4 core 6 Sq. mm |
| 200 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) |
| 201 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) |
| 202 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) |
| 203 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) |
| 204 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 4 Sq. mm / 4 core 2.5 Sq. mm (4 lux and 1 Earthing) (37+(8+1)*5) |
| 205 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 6 Sq. mm (4 lux and 1 Earthing) (43+(8+1)*5) |
| 206 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 10 Sq. mm (4 lux and 1 Earthing) (54+(14)*5) |
| 207 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 3 & 1/2 core 25 Sq. mm (3 lux and 1 Earthing) (76+(23)*4) |
| 208 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 3 & 1/2 core 35/50 Sq. mm (3 lux and 1 Earthing) (87+(28)*4) |
| 209 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 3 & 1/2 core 120 Sq. mm (3 lux and 1 Earthing) (163+(52)*4) |
| 210 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 3 & 1/2 core 185 Sq. mm (3 lux and 1 Earthing) (277+(93)*4) |
| 211 | Supplying and erecting approved make GRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (D) Width - 150mm, Pultruded “C” Channel with 30mm Sides 3mm Thickness, Loading 15 Kg./Mtr. |
| 212 | (E) Width - 200mm, Pultruded “C” Channel with 40mm Sides 4mm Thickness, Loading 25 Kg./Mtr. |
| 213 | (F) Width - 300mm, Pultruded “C” Channel with 50mm Sides 4mm Thickness, Loading 30 Kg./Mtr. |
| 214 | Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (a) with medium class Rigid PVC pipe and accessories Wire : (a) 2 wire 1.5 sq. mm |
| 215 | Additional Wire : Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (a) with medium class Rigid PVC pipe and accessories Wire : (b) 2 wire 2.5 sq. mm |
| 216 | Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories |
| 217 | Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories |
| 218 | Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories |
| 219 | Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories |
| 220 | Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. ( Plug & Switch can be together or at different location ) |
| 221 | Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[II] For 6/16A Plug with 2-2.5 sq.mm Cu. Wire(a) with medium class Rigid PVC pipe and accessories |
| 222 | Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling.Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness |
| 223 | Computer : Power Plugs 1 no. universal plug-switch combined + 1 Nos swithc for Below table 2 nos. 6A 5 pin Plug as below Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories Cat. III + Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (Car.iii) + [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (Car.iii) |
| 224 | Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 4 sq. mm |
| 225 | Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 6 sq. mm |
| 226 | Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge] 1200MM |
| 227 | Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing. |
| 228 | ELW 15.00 : Light Fixtures and FansSupplying and erecting, testing and commissioning of Recessed Mounted Direct Light 10 Watt Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 75mm - H : 90 MM - C : 69mm MAKE : Nirvana make - NL-0134 or as per apporved make list. |
| 229 | Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 12 Watt deep led Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 78mm - H : 86 MM - C : 72mm MAKE : Nirvana make - NL-0135 or as per apporved make list. |
| 230 | Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 15 Watt led Spot AG IP 54 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 100mm - H : 75 MM - C : 90mm MAKE : Nirvana make - NL-1170 or as per apporved make list. |
| 231 | Supplying and erecting, testing and commissioning of Surface Mounted 08 Watt led Down light AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 60mm - H : 112 MM MAKE : Nirvana make - NL-1129 or as per apporved make list. |
| 232 | Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 36 Watt led Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 150 mm - H : 160 MM - C : 125mm MAKE : Nirvana make - NL-0421 or as per apporved make list. |
| 233 | Supplying and erecting, testing and commissioning of Surface Mounted down Light 15 Watt led Spot AG IP 65 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 82 mm - H : 162 MM MAKE : Nirvana make - NL-4044 or as per apporved make list. |
| 234 | Supplying and erecting, testing and commissioning of Recessed Mounted 6 Watt LED FOOT MARKER, IP 65 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 MAKE : Nirvana make - NL-4210 or as per apporved make list. |
| 235 | Supplying and erecting, testing and commissioning of 20W LED TUBE LIGHT - IP20 |
| 236 | Supplying and erecting, testing and commissioning of 12W / mtr led strip IP20 indoor with profile 16x12 with driver (for 10mtr) Osaram / Ltech make Driver THD<10% |
| 237 | Supplying and erecting, testing and commissioning of Indoor integrated 36W LED IP65 Wall Washer beam angle 20ᵒx50ᵒ ,CRI>90, MacAdam<3sdcm, CCT-3000, IK-10, D :1000 mm - H : 85 MM - C : 43mm(Extended Aluminium with Toughened glass silicon gasket seals mounting-surface mounting) Finish : grey MAKE : Nirvana make - NL-4073 or as per apporved make list. |
| 238 | Supplying and erecting, testing and commissioning of Decorative Hanging Light with 12W LED lamp - For In Sute rooms Living room - HL-1 As per Quotation from Light Inside or as per sample apporved by Architect. |
| 239 | Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - Ground floor Restaurant area - HL-3As per Quotation from Light Inside or as per sample apporved by Architect. |
| 240 | Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - 2nd floor Banquet hall area - HL-6 (2.4 x 1.8 mtr x 1.5mtr (height) As per Quotation from Light Inside or as per sample apporved by Architect. |
| 241 | Supplying and erecting, testing and commissioning of Decorative wall bracket Light with LED lamp -All Guest room bedside - BL-3As per Quotation from Light Inside or as per sample apporved by Architect. |
| 242 | Supplying and erecting, testing and commissioning of Decorative Floor Lamp with foot switch with LED lamp - Guest room Floor LampAs per Quotation from Light Inside or as per sample apporved by Architect. |
| 243 | Supplying and erecting, testing and commissioning of Decorative Table Lamp with inbuilt switch with LED lamp - Guest room table Lamp As per Quotation from Light Inside or as per sample apporved by Architect. |
| 244 | Supplying and erecting, testing and commissioning of Skirting light with LED lamp - Guest room - NL1 As per Ligrand price list |
| 245 | Supplying and erecting, testing and commissioning of 4.53mtr - 36W / mtr LED surface mounted muilti LED Flexible strip light with 35 x 35mm size aluminium extrudesd housing and dot less diffuser, CRI>90 macdm < 3 sdcm, CCT 3000K, IK10 Fixture should be complete with required Osaram / Ltech make Driver, driver should be THD<10%. MAKE : Nirvana make - NL-5021 or as per apporved make list. |
| 246 | Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint.[D] Overall length of 4 Mtr. Average Thickness: 7mm.Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without Base) Anchor Base (Size 250X250 & 12mm th.) |
| 247 | Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia)(A) Single arm bracket |
| 248 | Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg. |
| 249 | Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.(b)For Electrical installation up to 11 KV in normal soil.Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg. |
| 250 | Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. |
| 251 | Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection.(8) Modem Jack for Computer Open RJ-45 - cat-III |
| 252 | Supplying & erecting push button type telephone instrument having speaker phone Caller ID & speaker phone with one touch memory (min.6 nos.)& 99 memories with display system (a) Single line BEETEL/panasonic or equivalent make |
| 253 | Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT - 6 |
| 254 | Supply, Installation, Testing & Commissioning of 5 Megapixel HD Dome Camera, HD1080p,1/2.7\\" CMOS, 24 pcs LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 3.6mm lens, 4 IN 1 OUTPUT |
| 255 | Supply, Installation, Testing & Commissioning of 2 Megapixel HD Dome Camera, HD1080p,1/2.7\\" CMOS, 24 pcs LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 3.6mm lens, 4 IN 1 OUTPUT |
| 256 | Supply, Installation, Testing and Commissioning of 16-Channel Digital Video Recorder recording with 4TB HDD with all require installation and integration with all camera system, 16 Turbo HD input, 16-ch video&1-ch audio input, 2 SATA interface, 1280×720P: 25(P)/30(N) fps/ch, 380 1U caseW/O HDD with all require software |
| 257 | Supply Installation, Testing and Commissioning of 32\\" Full HD LED monitor with Power Cord complete as required & necessary video cards complete as required (if required). Make - Sony, Samsung, Philips |
| 258 | Supply, Installation, Testing and Commissioning Power Supply for Camera |
| 259 | Supplying & Laying 24U Wall mounted Rack for the CCTV DVR installation with all require power ports fixed wall rack has a tempered glass door and removable locking side panels. Included with this rack is one set of fully adjustable cage-nut style rails and removable top and bottom cable slot panels, allowing easy installation of CAT5 or fiber optic cables. |
| 260 | Supplying and erecting wall mount speaker with rated power of 30 watt/power tapping 30/15/7.5 watt available,opening angle 180 degree H * 77 degree V ,sound pressure level 88 dB ,frequency response of 70Hz to 20KHz |
| 261 | Supplying & erecting dual channel amplifier ,power handling capacity of 180 watt ,four micro phone inputs with independent level control ,built in FM tuner,with preset memories,USB drive & SD card for MP3 playback ,100v /telephone input with priority and VOX,frequency response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated power up to 50 units |
| 262 | SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility,QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external number, Once only ring device, Boss/Secretary-Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with following capacities[C] No of Extension 48, No of Junctions 9, 8 Port IP Resource in-built, 4 Port Web base Video Conferencing, No of expandable ports : 128, Operators Console - 01 Compatible : ISDN |
| 263 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector having IS-11360-1985 or BS 5446 Part I-1977 & Part VII –1985 (VdS approved) or NFPA72 ( UL/ULC/FM approved) with Latest ammendment complete with mounting base complete as required. |
| 264 | Supplying, installation, testing & commissioning of addressable horn cum strobe having IS or BS (EN 54) (Vds approved) or NFPA 72 (UL/ULC/FM approved) with Latest Amendment complete as required. |
| 265 | Supplying, installation, testing & commissioning of addressable manual call point having IS or BS (EN 54) (Vds approved) or NFPA 72 (UL/ULC/FM approved) with Latest Amendment complete as required. |
| 266 | Supply, laying, testing and commissioning of twisted pair 2x1.5sq.mm Copper Armored 650V grade shielded XLPE insulated Fire Rate cable |
| 267 | HVAC Work : OUTDOOR UNIT : Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed invertertype twin Rotary/Scroll Compressor(s), minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better efficiency condenser fan shall be capable to operate atdifferent speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39 0C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improvingoverall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 5.4, Capacity > 40nd <70 ISEER 5.5, Capacity > 70 ISEER 5.6 for ECSBCBuilding) For Cooling or Heating or Both |
| 268 | Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System : 4TR |
| 269 | Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System : 1.6 TR |
| 270 | Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System : 3.6TR |
| 271 | Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (G) 4 TR |
| 272 | Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (E) 3.2 TR |
| 273 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (A) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 274 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (B) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 275 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (C.) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 276 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 277 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 278 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 279 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (G) 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 280 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 281 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (I) 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 282 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (J) 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 283 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (K) 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 284 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (L) 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 285 | Supply installation testing commissioning Shielded Shielded Control Cables for VRV System with necessary ISI mark Medium class rigid PVC pipes with necessary accessories with termination in machine and control equipments.. (A) 2C X 1.5 Sq mm Shielded Armoured |
| 286 | Providing, fixing, testing & commissioning of Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation. A 50MM |
| 287 | Providing, fixing, testing & commissioning of Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation.D 25MM |
| 288 | Fire Fighting Work : Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25MM |
| 289 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :32mm |
| 290 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :40mm |
| 291 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :50mm |
| 292 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:65mm |
| 293 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80mm |
| 294 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:100mm |
| 295 | Providing and fixing 80 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation |
| 296 | Providing and fixing 100 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation |
| 297 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 298 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following asrequired. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets onwall. (d) Connections from riser with 25 mm dia stop gunmetal valve & M.S. Pipe and socket. 30 Meter |
| 299 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following asrequired. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets onwall. (d) Connections from riser with 25 mm dia stop gunmetal valve & M.S. Pipe and socket. 40 Meter |
| 300 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : GUN METAL |
| 301 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required as per approved make. |
| 302 | Supplying and fixing of Fire brigade connection of cast iron body with Gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe |
| 303 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler |
| 304 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright Sprinkler Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender