Tender For Basic Provisions Including Bio Medical Waste Disposal In Proposed Uh & Wc At Chandrasekharpur Ahp, Buddhavihar, Bhubaneswar
Tender Value
5.27 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
7 days left
EMD
5271
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Basic Provisions Including Bio Medical Waste Disposal In Proposed Uh & Wc At Chandrasekharpur Ahp, Buddhavihar, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 2 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 3 | Providing & laying P.C.C. of prop.(1:4:8) in F & P, fountain, pathway toe wall, fountain base, base of column using 40mm nominal size down graded, screend, washed hard black cursher broken granite metal of approved quality & from approved quarry including laying in the layers hoisting, lowering, laying, watering and curing etc. complete to the requaired levels including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 4 | Dismentaling and removing old tiles flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete and direction of Engineer in charge. |
| 5 | R.C.C. work of M-20 having minimum compressive strength of 200kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge (but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 6 | Plinth Beam |
| 7 | Chajja |
| 8 | Lintel |
| 9 | Roof Slab |
| 10 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 11 | Brick work with Fly Ash Brick in cement mortar ( 1:6) with best quality bricks of size 25cm x 12cm x 8cm having minimum crushing strength from 75 Kg/cm2 wih dimension tolerance +2% immersing (well shaped, uniform in size) includes molding, chamfering, corbelling complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 12 | In Foundation & plinth |
| 13 | In Super Structure |
| 14 | Providing 12mm thick cement plaster in cement mortar of proportion (1:6) over even surface of brick work after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 15 | Supply, fitting and fixing of tiles in floors treads or steps and landing over 25mm thick bed of C.M. 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete including cost of all materials, labour etc. all complete as required for the work and direction of Engineer-in-charge. |
| 16 | GlazedCeramicFloorTile (30cmX30cm/ 40cmX40cm) |
| 17 | Providing & applying Two coat weather coat of exterior grade of approved make and shade an even finished surface over a coat of primer at all height with all scaffolding and staging charges including cost, conveyance of all materials and cost of all labour, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 18 | Supplying, fitting and fixing of Two Track Window (Sliding Type) made of UPVC of approved made with 6mm thick glass of approved quality complete with frame, shutters and all fittings fittd with rubber beading friction stay including locking arrangement all cost of labour,T&P hire charges of drilling machine etc complet as per direction of Engineer-in-charge. |
| 19 | Providing and fixing natural anodized aluminium door,(frame and shutter) fabricated from extruded aluminium alloy section 9202 as per vertical member, 9201 as top member , anodized to 15 microns in silver satin mat finish, members confirming to ISI mark, partly paneled with 12mm thick pre-laminated exterior grade wood based graded ISI mark (ISI-12823) prelaminated particle board confirming to approved make, colour and shade, partly glazed using 5mm thick plain glass, including providing all necessary fittings, fixtures and handle, brass door lock, double acting floor spring, (shutter opening inside only)aluminium tower bolt, neoprine gasket, etc., as per drawing, and fixed to the walls or columns with lugs in cement concrete 1:2:4 cutting holes and mending good to all damages, including filling the gaps if any, between the frames and walls/columns, with appropriate sealant including cost of all materials, labour, conveyance, taxes, royalties, scafolding, direction of the Engineer-in-charge. |
| 20 | Supplying , Fitting and Fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-charge. |
| 21 | Filling Foundation and Plinth with excavated earth/materials / moorum including laying in layers, ramming and watering well with initial leads and lifts T&P etc. complete as directed by the Engineer-in-charge. |
| 22 | Supplying, fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, butting, polishing etc. with cost, conveyance of all materials, labour and T&P etc. complete as required for the work etc. complete in all respect and direction of Engineer in charge. |
| 23 | Providing, fitting and fixing up partition walling OEL aluminium anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical meber and Oel section 4660 as Tapered Clip for fixing up and jointing angle No.1855 etc. complete as per drawing and design with cost, conveyance of all materials, labour and T&P etc. complete as required for the work etc. complete in all respect and direction of Engineer in charge. |
| 24 | Transporting, loading and unloading of debris loke rough stone, metal,broken tiles etc. from park area to nearby dumping yeard within 5 KM distance by truck including loading unloading etc. complete and direction of Engineer in charge. |
| 25 | Providing 6mm thick cement plaster in cement mortar of proportion (1:4) to RCC surface including close dep chipping an slury treatment with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 26 | Providing 25mm thick grading plaster in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. |
| 27 | Supply and fixing of 1000 ltr. capacity Rotational moulded Polyethylene cylindrical vertical water storage tanks conforming to IS:12701-1996 in 1st floor over a staging of 60 cm with required Fly ash brick work, RCC beam and slab as per drawing and specification including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixding Ball Valve etc. including hoisting up to a height of 5 meters above ground level and placing the tank to the required position etc. all complte as per specification and direction of Engineer-in-charge. |
| 28 | Supplying all materials, labor T&P and laying in trenches UPVC pipes confirming to ASTM 1785 (sch 80) of the following nominal diameter and fittings including testing as per specification all complet. |
| 29 | 50mm dia |
| 30 | 25mm dia |
| 31 | Supplying all materials,labours,T&P and fixing to wall, celling and floor UPVC pipe confirming to ASTM 1785 (sch 80) of the following nominal diameter with clamps and fittings including testing as per specification etc all complete as per PH specification and direction of Engineer-in-charge. |
| 32 | 25mm dia |
| 33 | 20mm dia |
| 34 | 40mm dia |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings including testing as per specification etc all complete as per PH specification and direction of Engineer-in-charge. |
| 36 | 25mm dia |
| 37 | 20mm dia |
| 38 | Supplying all materials, labour, T&P, fitting & fixing brass screw stop down cocks/ G M Full way valves of the following size including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 39 | 25mm dia (pvc ball valve) |
| 40 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge |
| 41 | 250mm thick wall |
| 42 | RCC slab up to 19 cms thick |
| 43 | Grrove Cutting |
| 44 | Supplying all materials,labour and T&P for constructing Inspection chamber of size 0.75 x 0.75 x 0.45m with R.C.C. top slab in M25 mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with flyash bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification and direction of Engineer-in-charge. (With RCPC Cover) |
| 45 | Supplying all materials, labours, T&P for constructing Manhole chamber of 0.90M X 0.90M X 0.90M with cement concrete (1:4:8) on bed with hard granite metal size 40mm and fly ash brickwork in cement mortar (1:4) in foundation and plinth, RCC top slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centering, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, etc for all materials as per the drawing, design and direction of Engineer-in-charge. |
| 46 | Supplyng all materials, labour, T&P for construction of C.I. Gulley trap chamber of size 250mm x 250 m x 675.0m by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm PVC grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. |
| 47 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 48 | 110mm OD PVC SWR pipe S/S ;type 'B' |
| 49 | 75mm OD PVC SWR pipe |
| 50 | 110mm PVC 'P' Trap |
| 51 | 110mm PVC Door Tee |
| 52 | 110mm Plain Tee |
| 53 | 110mm PVC Plain Bend |
| 54 | 110mm PVC Door Bend |
| 55 | 110mm PVC Cowl |
| 56 | 110mm PVC Off set Bend |
| 57 | 90mm PVC Nahani Trap |
| 58 | 75mm PVC Door Tee |
| 59 | 75mm PVC Plain Tee |
| 60 | Supplying all materials, fitting and fixing T&P Type B-1 standard bedding in haunching etc complete as per PH specification and direction of the engineer in charge. |
| 61 | Supplying all materials, labour, T&P, fitting and fixing of following Sanitary fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 62 | EWC with 'P' Trap |
| 63 | 550 x 400mm Wash Hand Basin with padestal |
| 64 | 15mm size C. P. bib cock short body 2 in 1 |
| 65 | 15mm size C. P. Angular Stop cock |
| 66 | 15mm size C. P. Pillar Cock Elbow cock type |
| 67 | 20mmm x 600mm size C.P. Towel Rail (Make - Plaza / Zigma / Amber) |
| 68 | C.P. Towel Ring |
| 69 | C.P. Soap Holder |
| 70 | 10 Ltr. Capacity L. L. Flushing Cistern (Make - Parryware / Nycer / Cera) |
| 71 | 15mmx450 mm PVC Connection pipe |
| 72 | 32mm x 600mm PVC Waste pipe (Make- Supreme / Prince / Prayas) |
| 73 | 32mm CP Waste Coupling (Make- Prayas) |
| 74 | 15mm size C. P. Flange Small |
| 75 | 15mm x 50mm C.P. Extension piece |
| 76 | 125mm C.P. Grating |
| 77 | BE Mirror (600mm X450mm) |
| 78 | Health Fuset with 15mm or 20mm inlet including polishing all complete as per specification. |
| 79 | Fixing Liquid Soap Container- Glass container or plastic |
| 80 | Laboratary Sink Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender