Tender For Construction Of Sabha Mantap Including Stage For Hanuman Devasthan Narayanwada Cuncolim Ponda (Under Mla Lad Scheme).
Tender Value
2.49 Crore
Estimated cost
Bid Submission
14 Jul 2026
3 days left
EMD
4.99 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sabha Mantap Including Stage For Hanuman Devasthan Narayanwada Cuncolim Ponda (Under Mla Lad Scheme).
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. |
| 2 | b) All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 3 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 4 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. |
| 5 | b) Moorum |
| 6 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 7 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 8 | Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 75 kgs/ cm2 (wire cut bricks). b) In superstructure upto floor five level. |
| 10 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level |
| 11 | Providing & laying cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering shuttering and finishing in: a) All works upto plinth level |
| 12 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering shuttering finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size); a) All works upto plinth level |
| 13 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering shuttering finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size); b) In walls (any thickness) including attached pilasters buttresses plinth and string courses fillets columns pillars piers abutments posts and structs etc. upto floor five level |
| 14 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering shuttering finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size); c) In beams suspended floors roofs having slope upto 15° landings balconies shelves chajjas lintels bands plain window sills staircases upto floor five level |
| 15 | Centering & shuttering including Strutting Propping & removal of forms for : i) Foundations Footings Bases for columns |
| 16 | Centering & shuttering including Strutting Propping & removal of forms for :; iii) Columns Piers Pillars Aburments Posts and struts (square rectangle polygon in plan) |
| 17 | Centering & shuttering including Strutting Propping & removal of forms for : iv ) Sides and Soffits of beams Beam Haunchings Cantilever Girders Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 18 | Centering & shuttering including Strutting Propping & removal of forms for : vi) Staircases (except spiral staircases) excluding landing |
| 19 | Providing TMT steel reinforcement bars of (SAIL TATA. VIZAGJSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 20 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 21 | 15mm cement plaster 1: 4 (1 cement: 4 coarse sand) on the rough side single or half brick wall. |
| 22 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 23 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 24 | Providing and applying white cement based putty of average thickness 1.00 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 25 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 26 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 27 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 28 | Varnishing (two or more coats) with copal varnish of approved brand and manufacture on new work including an under coat Bees waxing on wood work with local made wax polish in proportion of 2:1 5:1 0.5 (2 wax: 1.5 linseed oil: 1);With glue sizing |
| 29 | Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) a) 20 mm thick. |
| 30 | Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) 20 mm thick add 90% wastage 1.00 |
| 31 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson Somany Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc. complete. a) Dark Shades |
| 32 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor treads of steps landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 33 | Providing and and laying vitrified floor tiles in different sizes of Johnson Somany Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc. complete; d) 900 x 900 mm light Shades |
| 34 | Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622 of approved make in all colours & shade in skirting riser of steps and dados jointing with grey cement slurry @3.3 kg per sqm including point ing/grouting in white cement mixed with pigment of matching shade complete.;900 x 900 mm - Dark Shades |
| 35 | Providing and and laying Ceramic glazed floor tiles 300 x 300 (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as white ivory grey fume red brown laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc. complete |
| 36 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson Somany Kajaria ) conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. c) Wall Ceramic Glazed Tiles : 300 x 600 |
| 37 | Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1: 4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab over 0.50 sqm; a) Jet Black |
| 38 | Providing 20mm thick marble slab to urinal partitions with cement complete |
| 39 | Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1: 4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab over0.50 sqm b) Cherry Red |
| 40 | Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. a) 250 x 10 mm |
| 41 | Proving and fixing kitchen sink with R.S. or C.I. brackets C.P. brass chain with rubber plug 40 mm C.P. brass waste and 40mm M.I. or C.P. brass trap necessary unions complete including painting the fittings cutting and making good the walls where required. a) White vitreous china sink size. 600 x 450 x 200 mm |
| 42 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall . I) SCH-40(blue)/ (white) c) 32mm outer dia. |
| 43 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). c) 25 mm outer dia CPVC pipe |
| 44 | Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: a) 110 mm dia |
| 45 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.;Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 46 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubri cating.; a) 110 mm dia |
| 47 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. b) 75 mm dia |
| 48 | Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete with door : a) 110 mm dia |
| 49 | Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete with door : b) 75 mm dia |
| 50 | Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door : a) 110 mm dia |
| 51 | Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door : b) 75 mm dia |
| 52 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall . I) SCH-40(blue)/ (white) a) 20mm outer dia. |
| 53 | Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I) SCH-40(blue)/ (white) e) 50mm outer dia. |
| 54 | Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid with C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.;a) W.C. pan with white plastic seat and lid |
| 55 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door : a) 110 mm dia |
| 56 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia ABS/brass body with double lock 1.00 m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 57 | PVC SWR PIPES AND FITTINGS FOR ROOFING;Fancy wall mixer NON TELEPHONIC SHOWER SYSTEM Jaguar make or equivalent. 150 mm x 150mm x 100 mm x 100 mm dia |
| 58 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings R.S. or C.I. brackets standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete including painting of cister and fittings cutting and making good the walls and floors where required. a) One urinal basin with 5 litres p .v .c. automatic flushing cistern. |
| 59 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws; b) 750 x 20 mm size |
| 60 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : c) 25 mm nominal bore . |
| 61 | Providing and fixing non-return valve of approved quality : a) 50 mm nominal bore |
| 62 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. c) 1000 lit. capacity |
| 63 | Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :; 110 mm dia |
| 64 | Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : b )75 mm dia |
| 65 | Providing and fixing R.P.V.C. vent cowl: a) 110 mm dia |
| 66 | Providing and fixing R.P.V.C. vent cowl: b) 75 mm dia |
| 67 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993; a) 15mm nominal bore |
| 68 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931; 1993; a) 15mm nominal bore |
| 69 | Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931; 1993 |
| 70 | Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : b) 150 x 100 mm size –P or S type |
| 71 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required. a) Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps. |
| 72 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia ABS/brass body with double lock 1.00 m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 73 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts nuts and flat iron brackets 40 x 3 mm size complete. b) 180 mm nominal size |
| 74 | Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood moisture less than 17% wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos Note: For 35 & 40mm thickness shutters only frames of 5 x 2 ½ Cross section frames to be used.;Shutter Thickness; a) 30mm |
| 75 | Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design. |
| 76 | Providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon. a) First class Indian teak wood |
| 77 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. a) 40 x 3 mm flat iron hold fast 40 cm long |
| 78 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. b) 40 x 3 mm flat iron hold fast 15 cm long |
| 79 | Providing and fixing chromium plated brass handle with necessary screws etc. complete. a) 125 mm |
| 80 | Providing and fixing chromium plated brass handle with necessary screws etc. complete. b)100 mm |
| 81 | Providing and fixing chromium plated brass handle with necessary screws etc. complete. c)75 mm |
| 82 | Provided and fixing chromium plated brass 100-mm. rim latch and lock and a pair of knobs with necessary screws etc. complete (Indian make of approved quality). |
| 83 | Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete. |
| 84 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including anodized aluminium butt hinges with necessary screws:;a) First class Indian teak wood |
| 85 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enameled iron butt hinges with necessary screws: a) Second class Indian teak wood |
| 86 | Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats GI screws etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately) |
| 87 | Providing and fixing of aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock 6mm plain clear glass with EPDM beading etc. |
| 88 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 89 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand) finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg /sq.m. |
| 90 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels plates etc. with hairline finish including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.). |
| 91 | Steel work in built up tubular (round square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923/Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL TATA. VIZAG JSW APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. |
| 92 | Providing and fixing in position S.S. hand rail in main stair case and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials etc. complete. |
| 93 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. a) Plain grill |
| 94 | Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins rafters trusses flashings etc. complete as per the directions of the Engineer in charge. |
| 95 | Add for providing & fixing Flashings -[Corners Ridges valleys gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 96 | Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials chemicals plants equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. a) Pre-construction |
| 97 | Centering & shuttering including Strutting Propping & removal of forms for : xiii) Suspended floors roofs landings shelves & their supports |
| 98 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch modular plates suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.;(f) Group C --with Cat B Modular Accessories |
| 99 | Supplying and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch on board the modular surface /recessed PVC/GI modular box by suitably increasing its modular capacity modular plate and cover including connection painting etc. as required.;(b) Cat B |
| 100 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.;(b) Cat B |
| 101 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required. (b) Cat B |
| 102 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required; (b) Cat B |
| 103 | Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required; (b) Cat B |
| 104 | Supply and fixing PVC Square/Round block on wall/surface |
| 105 | Supplying and fixing brass batten/ angle holder including connections etc as required. |
| 106 | Installation earthing testing and commissioning of pre-wired fluorescent fitting/ compact fluorescent fittings of all types complete with all accessories and tube etc. directly on ceiling / wall including connections with 1.5 sq .mm FRLS PVC insulated copper conductor single core cable and earthing etc. as required. |
| 107 | Installationear thing testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm FRFRLS PVC insulated copper conductor single core cable etc. as required. |
| 108 | Supplying and fixing 6 A to 32 A C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (f) SP Cat B |
| 109 | Supplying and fixing 63 A C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (j) TPN Cat B |
| 110 | Supplying and fixing following way TPN sheet steel double door Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/ Isolator) interconnection between incomer MCB and busbars of following ways (but without MCBs as required);(e) 8 way (8+24) double door Vertical type Cat B |
| 111 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs (min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arra ngement(plumbing will be paid seperately). (b) In rocky strata |
| 112 | Extra for using salt and charcoal for pipe earth electrode as required ( 65 Kgs of Charcoal and 5 Kgs of Salt). |
| 113 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required |
| 114 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface (medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.;(a) 20 mm |
| 115 | Supplying and fixing of following sizes of PVC casing caping alongwith accessories on surface as required. (a)20mm casing capping |
| 116 | supply of 16 inch wall mounted fan of make bajaj Modal Regal or equivalent in havells,Crompton,usha,almanord as per instructions of the engineer incharge |
| 117 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 118 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 119 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (c) 2 x 4 sq.mm +1 x 4 sq.mm earthwire (20mm Conduit) |
| 120 | Supply of 4 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I) IS:7098(Part I) with latest amendments of following size.;4 Core 25 sq.mm |
| 121 | Supply of 4 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I) IS:7098(Part I) with latest amendments of following size.;4 Core 10 sq.mm |
| 122 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq. mm on surface etc. complete as required |
| 123 | Supply of 4 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I) IS:7098(Part I) with latest amendments of following size.;4 Core 50 sq.mm |
| 124 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq. mm in the existing masonry open duct etc. complete as required |
| 125 | Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). e) 40 mm nominal bore |
| 126 | Supply and erecting fan hook box ( 100 mm diameter or equivalent square size 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box including painting with 2 coats of red oxide complete as required. |
| 127 | Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings 1400 rpm complete with all accessories(a) Cat A |
| 128 | Supply and erecting of 48 inch (1200mm sweep) ceiling fan double ball bearing type complete with all accessories(b) Cat B |
| 129 | Supply of 4 feet, LED single box type powder coated CRCA body fitting with all accessories suitable for 18/20/22 W LED tube including 1no. of LED tube having integral driver complete as required of makes: Havells, model-Regal Batten, T8 upto 1x22W SSBSWH (tube-Photon Ultra, E2.0 121 3T8 SSTL 20w LED 865 SPC. Cropmton model-Eco-I, IGP 161 LT8-16 tube-Ultron, LT8-20-865(2).Jaguar, model- Luni 01x 120xC CW 20w (tube LTBL 01 x 020xC Tube, AI-PC based, CW 20w. Bajaj model BLRB188 (tube BLRB 20w LED 6500K or equivalent models of above makes only superseding at the time of execution as directed at the time of execution as directed by the Engineer in charge. |
| 130 | Supply of LED Double Box type, powder coated CRCA body fitting with all accessories, suitable for 18/20/21/22/24W LED tube, including 2nos. of LED tube, complete as required of makes : Philips, model - TMC 501P 2xT-LED 22W (tube- Philips Stellar Bright TLED 20W, 6500K 2100Lm tube/20W Essential LED tube,865, T8) // Pharox, model-Pharox BTF-2x18W Boxtype fitting (tube-Pharox iRay Series (IR A018C000)-18W, 1200mm, 6500K, 1800Lm/iRay Lux Series (IRL 018C001)-18W, 1200mm,6500K, 2000Lm) //Crompton, model-IGP 132LT8-16 (tube-Crompton LT8-20, 865-2 / LTT8-20, T8) // Wipro, model- WIO 92 ( 922208),Twin 4feet Channel (tube-Wipro- Pro LED, LL13-181-65O, 18W/ 65SE-20W, 6500K) //Bajaj, model- BLRB-DB 218,suitable for 2x18W LED tube,(tube-BLRB 18W CWC coolwhite) or equivalent models of above makes only (superseding at the time of execution), as directed by the Engineer-in-charge. |
| 131 | Supply of 9W, B22 cap, cool day light (min.800Lm) LED lamp of make Havells//Bajaj // Philips // A nchorPanasonic//Jaquar-sparkHD or equivalent lamps with similar specifications in Crompton / Wipro. |
| 132 | S.I.T.C. of 50W LED floodlight luminaire, with efficient high output LEDs, integral driver in pressure die cast metallic/PDC housing, having IP-65/66 protection, better optics for uniform light distribution (cool white), mounting bracket, connection terminals and other accessories etc, including connections complete as required of makes : Havells, model- JETA Quanto Plus, JETA QUANTO PLUS, FLP 50w LED 757,SYMLENS. // Crompton, model- ROVER PRO, CFS 504 50 57 NL SL GL NSG. //Panaonic IP65, IK07 6500k// Bajaj, model- AMAZE, BJFL 50w LED I, 50w, 5700k. // Wipro, model: Garnet, D915065-1, 50w, 6500k, or equivalent model of above makes only (superseding at the time of execution), as directed by the Engineer-in-charge. |
| 133 | Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge including painting etc as required |
| 134 | Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required\\";(b) Cat B\\" |
| 135 | SITC of decorative Post/Gate Top light fixture made of die cast metallic/p olycarbonate housing, powder coated, with clear acrylic/ glass diffuser , nuts, bolts etc.along with 12W LED lamp (warm white) suitable for E27/B22 holder ,complete as required including connections and suitable mounting on surface .The fixture and lamp shall have one year replacement warranty and shall be of make ANTRA, MODEL:ANT-102 (size B-450mm x 260mm),B22 holder// vikas, model: SCADA (size 11\\" X 22\\"), E27 holder or equivalent model supreseding at the time of execution of above makes. The LED lamp shall be of make Panasonic//Orient or equivalent, also including transportaion from factory to site. |
| 136 | Supply of 12W Wall Light LED Batten Luminaire of make Panasonic,(Cat noPUDM02127) or Equivalent model in other brands such as Bajaj /Crompton /Phillips /Jaguar /Legero /Orient /Havells. Complete as required.(Equivalent to be approved by Engineer in-charge) |
| 137 | Supply installation testing & commisioning of slim square LED 2X2 ft 36/40W Recessed /surface Mounted diffuser downlight including driver and other accesories etc as reqd of make Crompton Model Stellux -I LCTRI-36-CDL / Bajaj Model gladden Cat no BZRSQL 36L LED GX WH /Havells Model Model Venus Trend POS cat no Venus trend 2x2PLR36W LED857SWH or equivalent Luminaries as directed by the Engineer-in-charge. |
| 138 | S.I.T.C of 18W Fascade light including all accessories such as driver , clamps ,fixing hardware and connection with suitable size copper cable from the nearest light point/DB as req uired,complete in all respects of make Pasolite Fascade Light 18W, Havells Fascade Light 18W,Philips Fascade Light 18W as directed by the Engineer in charge |
| 139 | PCC PANEL INCOMING A).100A,25KA 4 Pole MCCB (Ics=100%Icu) with rotary operating handle and spreadler Links.........1SET B). 200A 3 Phase Aluminium Busbar….1SETC) 15OA 4 POLE Manual Changeover. 1 SET D).RYB LED type indicating lamps 2SET E).VIF METER .....1SET F).3 Phase,4 wire CT operated Energy Meter with Provision for Sealable Compartment OUTGOINGA). 63A,3P,10KA TPMCCB with rotary operating handle. 1 No.sB). 40A,3P,10KA MCCB with operating handle. 3nosC).20A,SP MCB. 2 NO.SE).Suitable Neutral Links...... 4 sets |
| 140 | Supply of 3W Fascade light including all accessories such as driver , clamps ,fixing hardware and connection with suitable size copper cable from the nearest light point/DB as req uired,complete in all respects of make Pasolite Garden Spike Light LS 1234, LX Garden Spike light LX008, Teknolite Garden Spike light SKII-6 , Havells Garden Spike light, Crompton Garden Spike li ght,Philips,Orient, as directed by the Engineer in charge |
| 141 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in PVC casing capping and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. |
| 142 | Supply of 3 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I) IS:7098(Part I) with latest amendments of following size.;3 Core 2.5 sq.mm |
| 143 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq. mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharges and cushioning with screened sand bed of 20mm thick protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 144 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq. mm on surface etc. complete as required Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender