Tender For annual repair & maintenance of Residential/Non-Residential Building Under Jal Shakti Division Sundernagar, Distt. Mandi (H.P.)(Sh:- Repair And Maintenance Of Executive Engineer Jsv Residence (S-V) At Karnodi).
Tender Value
4.11 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
6 days left
EMD
8300
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Residential/Non-Residential Building Under Jal Shakti Division Sundernagar, Distt. Mandi (H.P.)(Sh:- Repair And Maintenance Of Executive Engineer Jsv Residence (S-V) At Karnodi).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing PVC wall/ceiling panelling made of rigid Polyvinyl Chloride (PVC) panels of approved design, size and thickness, fixed on a framework of aluminium/GI/wooden battens or channels, including interlocking of panels, cutting, grooving, and fixing with screws, nails or adhesives as required, complete in all respects including corner mouldings, edge beading, joint finishing, and surface preparation as per specifications and direction of Engineer-in-Charge. |
| 2 | Providing & applying weather-resistant roof paint in required number of coats including surface preparation, cleaning of roof surface by removing dust, dirt and loose materials, filling of cracks with approved crack filler/compound, white cement etc. complete in all respects as per specifications. |
| 3 | Providing and fixing cup board shutters 18 mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS 12823 marked, exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 18 mm wide × 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge. |
| 4 | Providing and fixing cupboard/almirah hinges (butt hinges/concealed hinges) of approved make, size and material (SS/Brass/Aluminium), including cost of screws, drilling, cutting, fitting, and making good the surface, complete in all respects. |
| 5 | Providing and fixing approved quality stainless steel/aluminium almirah handle of standard size on steel cupboard door, including drilling, fixing with suitable screws, nuts, washers, and complete in all respects as per direction of Engineer-in-Charge. |
| 6 | Providing and fixing chromium plated brass bathroom tap (bib cock/pillar cock) of approved make, including all fittings, accessories, and connections, complete in all respects. |
| 7 | Providing and supplying wooden/steel table of size 0.90 m × 0.60 m × 0.45 m (equivalent to 3 ft × 2 ft × 1.5 ft) made of approved quality material, including top, legs, framing, necessary fittings, polishing/painting, and complete in all respects as per site requirement. |
| 8 | Providing and supplying flexible pipe of 25 mm (1 inch) dia of approved quality material (PVC/HDPE/rubber as required), having length 27.50 m (approx. 90 ft), and complete in all respects as per site requirement. |
| 9 | Providing and fixing white vitreous china water closet (Indian/European type as required) with flush tank (cistern) of approved make, including seat and cover (for EWC), flushing arrangement, all necessary fittings such as inlet/outlet connections, pipes, bend, brackets, nuts, bolts, and rubber washers, complete in all respects, including connection to existing soil pipe and water supply line, as per PWD specifications and direction of Engineer-in-Charge. |
| 10 | Providing and fixing storage type electric geyser (water heater) of 25 litre capacity, of approved make, suitable for operation on 230V, single phase, 50 Hz AC supply, complete with inner tank (glass-lined/enameled), outer body, PUF insulation, heating element, thermostat, safety valve, inlet & outlet connections, all necessary fittings, nuts, bolts, and including testing and commissioning, complete in all respects as per directions of Engineer-in-Charge. |
| 11 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (Two Coats to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete. |
| 12 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repair to scratches complete. |
| 13 | Painting one coat (excluding priming coat)on previously painted woodand wood based surfaces with readymixed paint brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With Readymixed paint ( white ) Extra over for every subsequent coat of paint With readymixed paint(white) |
| 14 | Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter :-- With Enamel paint other than white Extra over for every subsequent coat of paint. With enamel paint other than white. |
| 15 | Providing and fixing high pressure PVC spigot and socket west and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per the direction of engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender