Tender For A/R&M/O Residential/ Non Residential Building Under Jal Shakti Division Sundernagar Distt. Mandi (Hp)(Sh:- Providing Wall Painting And Electrical Installation At The Top Floor Of Jal Shakti Circle Office Sundernagar).
Tender Overview
Project Description
Tender for A/R&M/O Residential/ Non Residential Building Under Jal Shakti Division Sundernagar Distt. Mandi (Hp)(Sh:- Providing Wall Painting And Electrical Installation At The Top Floor Of Jal Shakti Circle Office Sundernagar).
BOQ
| Sl. No. | Item Description |
| 1 | Applying Acrylic Washable emulsion Spectrum quartz king or wquivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti rusting & foaming in twon coats i/c necessary putty to give smooth even surface, sand papered smooth complete. |
| 2 | Finishing wall with weather proof exterior grade emusion of apprved design (Apexultima) or its equivalent on undecorated wal surfaces (Two Coats to give an even shade and final finish after throughly cleaning the surface to remove all dirt. dust and other foreign matter etc. including sand paper smooth complete . |
| 3 | Brick work using common burnt clay building bricks in foundation and plinth in :- Cement mortar 1:6 (1 Cement : 6 Sand) second class Bricks |
| 4 | 15 mm cement plaster in single coat on rough side of brick/concrete/ stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) |
| 5 | Steel work welded in built up sections, trusses and framed work including cutting,hosting,fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings. |
| 6 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) asspecified. |
| 7 | Providing and Fixing of vertical or horizontal blinds double side including cost of roller in all respect dust proof made of superior quality in all leads and lifts as per entire satisfaction of the Engineer-in-Charge. |
| 8 | Supplying and fixing of 20 mm diameter PVC conduit along with the accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required :- |
| 9 | Supplying and fixing of 20 mm diameter PVC bend along with the accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required :- |
| 10 | Wiring for light plug with 2 x 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. 1.5 Sq. mm HRFRLS/PVC insulated sigle core copper conductor cable for earthing as required. |
| 11 | Wiring for light plug with 2 x 2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. 2.5 Sq. mm HRFRLS/PVC insulated sigle core copper conductor cable for earthing as required. |
| 12 | Installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 3 litres capacity water heater (instant geyser) |
| 13 | Providing and Fixing of Geyser pipe in all respect of superior quality in all leads and lifts as per entire satisfaction of the Engineer-in-Charge. |
| 14 | Providing and Fixing of Havells make LED Tube Fixture 18 watt complete in all respect in all leads and lifts. |
| 15 | Providing and Fixing of 4x4 PVC Board complete in all respect in all leads and lifts. |
| 16 | Providing and Fixing of 4x4 PVC Sheet complete in all respect in all leads and lifts. |
| 17 | Providing and Fixing of 7x4 PVC Sheet complete in all respect in all leads and lifts. |
| 18 | Providing and Fixing of 16 Amp socket complete in all respect in all leads and lifts. |
| 19 | Providing and Fixing of 10 Amp Switch complete in all respect in all leads and lifts. |
| 20 | Providing and Fixing of J box complete in all respect in all leads and lifts. |
| 21 | Providing and Fixing accories for fixing wiring cassing, well cap, screw, Tape Roll, Catcher, 2mm plate, 2mm Pvc Box and Top 16 amp, B/H etc.. complete in all respect in all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender