Housing Urban and Rular Development Government Departments Closing in 4 days TDR #56363133

Tender For repair renovation Damages To Subathu Bye Pass Road In Km. 0/00 To 0/800. (Sh:- providing and laying 50Mm Thick Dbm And 30Mm Thick Bc In Km. 0/00 To 0/800). Under Pdna

Issued by Government Departments · Solan, Himachal Pradesh
Tender Value
35.08 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
70200
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for repair renovation Damages To Subathu Bye Pass Road In Km. 0/00 To 0/800. (Sh:- providing and laying 50Mm Thick Dbm And 30Mm Thick Bc In Km. 0/00 To 0/800). Under Pdna

BOQ

Name of Work:- R/R damages to Subathu Bye Pass road in Km. 0/00 to 0/800. (SH:- P/l 50mm thick DBM and 30mm thick BC in Km. 0/00 to 0/800). Under PDNA
Sl. No. Item Description
1Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MORD Technical Specification Clause 502 including carriage of materials,labour and equipments to various location of site of work through all modes of transportation in all leads,lifts and all incidentals.
2Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 including carriage of materials, labour and equipments to various location of site of work through all modes of transportation in all leads,lifts and all incidentals.
3Providing and laying dense graded bituminous macadam with higher capacity with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, trasnporting the hot mix to work to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling, with smooth wheeled, viberatory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No-507 complete in all respect.
4Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-Ten) at the rate of not less than 5.5% (five point five percent of mix weight or as per design mix with nono technology (Zycotherm) at the rate 0.1% (zero decimal one percent) weight of bitumen, using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor conrol to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with smooth three wheel roller 8-10 (eight to ten ) tonne capacity for initial break down rollng and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eighty) tonne sommth wheeled tandom roller to achive the desire compaction as per MoRTH technical specification clause 507 complete upto entire satisfaction of Engineer-in-Charge, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56363133
AUTHORITY Government Departments
TENDER VALUE 35.08 Lakhs
LAST DATE 15-07-2026
Authority
Authority Name Public Works Department
Work Description Tender for repair renovation Damages To Subathu Bye Pass Road In Km. 0/00 To 0/800. (Sh:- providing and laying 50Mm Thick Dbm And 30Mm Thick Bc In Km. 0/00 To 0/800). Under Pdna
Basic Detail
Tender No 4026-35 dated 06.07.2026
Bidding Type Tender
Location
City Solan
State Himachal Pradesh
Key Dates
Publish Date 08 Jul 2026
Submission Date 15 Jul 2026
Open Date 15 Jul 2026
Finance
Tender Value 35.08 Lakhs
Tender Fee 2000
EMD 70200
Exemption Not Available
Document List
BOQ_205218.xls
cba89678-6cf0-45f9-b0e4-9631154f1ac8.html
Tendernotice_1 (10).pdf
Tendernotice_2 (6).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Jul 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_205218.xls

html

cba89678-6cf0-45f9-b0e4-9631154f1ac8.html

pdf

Tendernotice_1 (10).pdf

pdf

Tendernotice_2 (6).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders