Tender For General-Gida-Tidal Flood Mitigation - Construction Of Protection Wall And Outer Bund To Prevent Tidal Flooding On The West Side Of Vallarpadom Island In Ernakulam District -Reach1-General Civil Work
Tender Value
10.22 Crore
Estimated cost
Bid Submission
07 Aug 2026
29 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
16540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Gida-Tidal Flood Mitigation - Construction Of Protection Wall And Outer Bund To Prevent Tidal Flooding On The West Side Of Vallarpadom Island In Ernakulam District -Reach1-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix 1 |
| 2 | OD33438/2025-2026:Providing and conveying Pre-cast reinforced cement concrete piles of specified size in M-25cement concrete to carry safe working load not less than specified, including centering,shuttering, etc. complete but excluding the cost of steel reinforcement. (Length of pile forpayment shall be measured from top of the shoe to the top of pile cap).400 mm x 400mm piles ( Based on DSR 20.5.1 ) |
| 3 | OD33437/2025-2026:Driving and installing Pre cast reinforced cement concrete piles of any size and length in M-25 cement concrete etc complete Based on (DSR 20.5.1) |
| 4 | OD33436/2025-2026:Providing,conveying, hoisting and fixing up to floor five level, precast reinforced cementconcrete in slabs including setting in cement mortar 1:3 ( 1 cement : 3 coarse sand), cost ofrequired centering, shuttering and finishing with neat cement punning on exposed surfaces butexcluding the cost of reinforcement, with machine batched and machine mixed design mix M -25 grade cement concrete ( based on DSR 5.16 ) |
| 5 | 5.35:Add for using extra cement in the items of design mix over and above the specified cement content therein |
| 6 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 7 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 8 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 10 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 12 | OD33435/2025-2026:Deepening the water bodies by using dredger having a flow rate of 1750 to 2250m3 slurry per hour with a solid output of not less than 300 m3/hour and dumping the spoil at location already pointed out by the departmental officers with a lead up to a radial distance of 750m to 1500 m, including hire charges of dredger, all tools and plants and accessories , fuel charges, idling and mobilization charges, providing and shifting the pipe lines including all labour charges, incidental charges and service tax etc. complete for a depth up to (-) 4.50m bed level with a tolerance of +/-20cm (Based on the item 12.8 of Common Approved Data by CTE). |
| 13 | 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars |
| 14 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | 16.91.2:Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender