Tender For Construction Of Veterinary Dispensary Grade-I (Veterinary Aid Centre) With Water Supply & Electrification (Main New (Veterinary) Building Dispensary Construction With Water And Light), At- Chumb, Tal- Barshi, Dist - Solapur.
Tender Value
42.23 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
12 days left
EMD
43000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Veterinary Dispensary Grade-I (Veterinary Aid Centre) With Water Supply & Electrification (Main New (Veterinary) Building Dispensary Construction With Water And Light), At- Chumb, Tal- Barshi, Dist - Solapur.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Upto1.5 M.) By Mechanical Means SSR Pg No./It No. 153/721/21.02 Spec. No. : Bd A.1 Page No. 259 |
| 2 | Excavation for foundation in hard murum including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete ( Lift Upto 1.5 m) By Mechanical Means. SSR Pg No./It No. 153/725/21.06/BDA2 Spec. No. : Bd A. 2 Page No. 259 |
| 3 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. SSR Pg No./It No. 155/737/21.22/BDW Spec. No. : As Directed By Engineer Incharge |
| 4 | Providing and laying Casting in situ,/ Ready mix concrete cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel Centering ,formwork, laying / pumping, compacting,roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed sand VSI Grade finally washed etc.) SSR Pg No./It No. 175/827/24.01/BDE1 Spec. No. Bd. E. 1 Page No. 287 |
| 5 | Providing and laying in situ/ Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.178/836/25.11/BDF3 Spec. No. Bd. F. 3 Page No. 298 and B-7 Page No. 38 |
| 6 | Providing and casting in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete.With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.179/841/25.31/BDF5 Spec. No.:Bd. F. 5 Page No. 300 and B-7'Page No.38 |
| 7 | Providing & casting in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.181/846/25.50/BDF6 Spec. No. : Bd.F.6Page No.300 and B-7, Page No. 38 |
| 8 | Providing & casting in situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No. 184/856/26.05/BDF9 Spec. No. : Bd.F.9 Page No.303 and B-7, Page No. 38 |
| 9 | Providing and casting in situ cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).with reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.185/860/26.17/BDF11 Spec.No. :Bd. F.11 Page No.304.and B-7,Page No. 38 |
| 10 | Providing and casting in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete.With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.182/851/25.70/BDF8 Spec. No. :Bd.F.8 Page No. 302 and B-7, Page No.38 |
| 11 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering, Complete. SSR Pg No./It No.197/889/27.01/BDG1 Spec. No. Bd.G.1 Page No. 313 |
| 12 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding etc Complete. SSR Pg No./It No.197/892/27.05/BDG5 Spec. No. Bd.G.5 Page No. 315 |
| 13 | Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm x 1.6 mm at every third course, properly bend and bonded at ends scaffolding, racking out joints and watering complete. SSR Pg No./It No.197/893/27.06/BDG7 Spec. No. : Bd.G.7 Page No. 316 |
| 14 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR Pg No./It No. 188/871/26.33/BDF17 Spec. No. : Bd.F.17, Page No. 306 |
| 15 | Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. SSR Pg No./It No.157/750/21.36/BDA10 Spec. No. Bd. A 10 Page No. 262 |
| 16 | Filling in plinth and floors with contractor’s material / brought from out side and approved by engineer incharge in layer of 15 cm to 20 cm including watering and compaction. Etc complete. SSR Pg No./It No.157/751/21.37/BDA11 Spec. No. Bd. A 11 Page No. 263 |
| 17 | Providing internal cement plaster 6 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. SSR Pg No./It No. 209/956/32.02/BDL1 Spec. No. : Bd.L.1 Page No. 367 |
| 18 | Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. SSR Pg No./It No. 209/959/32.05/BDL2B Spec. No. : Bd.L.2 Page No. 368 |
| 19 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR Pg No./It No. 209/963/32.11/BDL7 Spec. No. : Bd.L.7 Page No. 369 |
| 20 | Providing neeru finish to plastered surfaces in a all positions including scaffolding and curing complete. SSR Pg No./It 210/966/32.15/BDL10 Spec. No.: Bd.L. 10 Page No. 370 |
| 21 | Providing and laying damp proof course 50mm thick in M-20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. SSR Pg No./It No. 213/988/31.01/BDJ2 Spec. Bd.J.2 Page No.355 |
| 22 | Providing and laying handcut polished Kotah Stone flooring 25mm to 30mm thick and 30cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.. SSR Pg No./It No.213/994/33.07/BDM Spec. No.: Bd.M. 3 Page No. 380 |
| 23 | Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. SSR Pg No./It No.221/1059/33.81/BDM Spec. No.: As Directed By Enginer INcharge |
| 24 | Providing and laying vitrified matt fininsh tiles of having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning complete .a) flooring. SSR Pg No./It No.217/1029/33.42/BDM12 Spec. No.: Bd.M. 12 Page No. 385 |
| 25 | Providing and laying vitrified matt finish tiles of having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning complete. b) Skirting SSR Pg No./It No.217/1030/33.43/BDM12 Spec. No.: Bd.M. 12 Page No. 385 |
| 26 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.. SSR Pg No./It No.220/1051/33.67/BDM Spec. No. Bd. M.12 Page No. 385 |
| 27 | Providing and laying ceramic tiles of having size 30cmX30cm and confirming to corresponding I.S. for dado & skirting in required position with ready made adhesive morter of app. quality on plaster of 1:2 C.M. including filling joints with white/colour cement slurry, curing, cleaning etc complete. SSR Pg No./It No.215/1012/33.25/BDM13 Spec. No. Bd. M.13 Page No. 386 |
| 28 | Providing and fixing heavy duty inter locking concrete Gray paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. SSR Pg No./It No. 218/1036/33.49/BDM Spec. No. As Directed By Engineer Incharge |
| 29 | Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. SSR Pg No./It No.245/1195/39.02/BDT Spec. As directed by Engineer in charge |
| 30 | Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. SSR Pg No./It No.246/1203/39.10/BDT36 Spec.No.BDT-36 Page No.500 |
| 31 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. SSR Pg No./It No.220/1052/33.68/BDM Spec.No.As Directed By Engineer Incharge |
| 32 | Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. SSR Pg No./It No.262/1277/39.82/BDT Spec. As Directed By Engineer Incharge |
| 33 | Providing and laying polished machine cut shahabad stone slabs 20 to 25 mm thick for treads and risers of steps and staircases,with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float , filling joints with neat cement slurry, curing, polishing and cleaning complete. SSR Pg No./It No.214/1004/33.17/BDM22 Spec. No. Bd. M. 22 Page No. 390 |
| 34 | Providing and fixing mild steel grill work for windows, ventilators, etc. 20 kg/sq.m as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR Pg No./It No. 264/1291/40.01/BDU1 Spec. No. : Bd.U.1 Page No. 537 |
| 35 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sq.m as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR Pg No./It No. 265/1292/40.02/BDU1 Spec. No. : Bd.U.1 Page No. 537 |
| 36 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. SSR Pg No./It No.259/1263/39.68/BDT Spec.No. As directed by Engineer in charge |
| 37 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete with poweder coating without box SSR Pg No./It No.254/1237/39.44/BDT Spec. As directed by Engineer In Charge |
| 38 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983). SSR Pg No./It No. 249/1219/39.26/BDT57 Spec. No. : Bd.T. 57 Page No. 511 |
| 39 | Providing and applying priming coat concret / masonry / asbestos cement plastered surfaces including scaffolding if necessary , preparing the surface by throughly cleaning / oiled / grees / dirt and other farain matter and sand papering as required. SSR Pg No./It No. 225/1090/35.21/BDO 8E Spec. No. : As directed by engineer in charge |
| 40 | Providing and applying Plastic Emulsion paint of approved quality ,colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat.) complete. SSR Pg No./It No. 227/1107/36.12/BDP6 Spec. No. : Bd. P. 6 Page No. 414 & Pre Approval Of Superitendering Engineer |
| 41 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surfaces, watering for two days complete. SSR Pg No./It No. 224/10831/35.13/BDO8 Spec.No.:Bd.O. 8 Page No. 406 |
| 42 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including “S” trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. SSR Pg No./It No. 277/1401/42.30/BDV Spec. : As directed by Engineer in charge. |
| 43 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. SSR Pg No./It No. 277/1405/42.34/BDV Spec. : As directed by Engineer in charge. |
| 44 | Providing and fixing White Glazed earthenware Wash Hand Basin of 45 cm. x 30 cm. size including cold water piller tap /cold and hot water piller tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap upto the outside face of the wall.Making good the damage surface, testing etc. complete. SSR Pg No./It No.272/1358/41.64/BDV30 Spec. : Bd V.30 Page No.565 |
| 45 | Providing and fixing H.D.P. container syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting fixing of accessories such as inlet, outlet, overflow inclusive of all taxes Capacity between 200 To1000 lit. SSR P.No.280/1424/42.53/BDV Spec.As directed by engineer in charge |
| 46 | Providing and casting 15X10cm salt glazed stoneware gully trap in cement concrete 1:4:8 out side the building including cast iron greating in the sink conceting glazed stoneware pipe , brick masonry chamber eith cast iron lid and iron greating for the gully trap. SSR Pg No./It No.274/1373/42.02/BDV38 Spec. No. : Bd. V.38 Page No.572 |
| 47 | Providing and fixing 15 mm dia screw down bib/stop tap of brass including nessesary sockets, union nuts complete. SSR P.No. 270/1334/41.40/BDV8 Spec.No.BdV 8 Page No. 554 |
| 48 | Providing and fixing on Walls/Ceiling/Floor 15mm Dia CPVC pipe with necessacery fittings,remaking good the demolished portion etc. complete. complete.Including removing existing pipe line if necessacery and conveying and stacking the same in PWD chowaky or as directed etc.complet . SSR Pg No./It No. 280/1426/42.55/BDV Spec.No. BDV5 Page No.551 As Directed By-In-Charge |
| 49 | Providing and fixing on Walls/Ceiling/Floor 20mm Dia CPVC pipe with necessacery fittings,remaking good the demolished portion etc. complete. Including removing existing pipe line if necessacery and conveying and stacking the same in PWD chowaky or as directed etc.complet . SSR Pg No./It No. 280/1427/42.56/BDV5 Spec. As Directed By-In-Charge |
| 50 | Providing and fixing trenchs 20mm Dia CPVC pipe including necessacery excavation , fittings,refilling trench etc.complete. Including removing existing pipe line if necessacery and conveying and stacking the same in PWD chowaky or as directed etc.complet . SSR Pg No./It No. 281/1433/42.62/BDV5 Spec. No.BDV5 , Page No.551 & As Directed By-In-Charge |
| 51 | Providing laying & fixing 100 mm dia.Stabeliser pipe / PVC Soil vent / West pipe and With necessacery Fixtures and fastening such as bends, single junction slotted vent clamp etc.complet. SSR Pg No./It No. 279/1423/42.52/BDV Spec.As directed by engineer in charge |
| 52 | Providing laying & fixing 75 mm dia.Stabeliser pipe / PVC Soil vent / West pipe and With necessacery Fixtures and fastening such as bends, single junction slotted vent clamp etc.complet. SSR Pg No./It No. 279/1422/42.51/BDV Spec.As directed by engineer in charge |
| 53 | Providing and fixing 10cm PVC Nahani Trap With greating etc. complete. SSR P.No.281/1438/42.67/BDV32 Spec.As directed by Engineer Incharges |
| 54 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. etc. complete. SSR Pg No./It No.275/1390/42.19/BDV46 Spec.No.Bd.V.46 Page No.576 |
| 55 | Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover meadium duty 140kg with frame etc complete. SSR P.No.275/1383/42.12/BDV43 Spec.No.BdV 43 Page No. 574 |
| 56 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR P.No.276/1391/42.20/BDV Spec.No.BdV 9 Page No. 555 |
| 57 | Providing and fixing Information sign board of size 0.90 X 0.90 m . Prepared on 16 guage M S Sheet with horizontal bracting of M S flat os size 25 X 6 mm uncluding painting with one coat of zinc cromzte primer and two coats oil painting including twonumber of M S angleiron post of size 50 X 50 X 6 mm of 2.70 m longincluding conveying all taxes fixing in ground with cement concrete 1:4:8 block of 45 X 45 X 45 cm size as directed by Engineer in charge stc. complete. |
| 58 | Providing and fixing 90 cm. x 60 cm. Marble plate engraving 10cm. height letter, figures including painting the lefters/figures with approved colour and shade complete. SSR Pg No./It No. 294/1526/44.11/BDW7 Spec. No. :Bd.W.7 Page No. 586 |
| 59 | Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. SSR Pg No./It No. 46/205/6.05/MORTH801 Spec. No. :MORTH 801 |
| 60 | ADD FOR SAND ROYALTY CHARGES |
| 61 | ADD FOR OTHER MINERALS ROYALTY CHARGES |
| 62 | Test of Bricks -Water Absorption (Set of 5 Bricks). Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks) SSR Pg No./It No.584/13 |
| 63 | Test of Concrete - Compressive Strength OF C.C. M10,C20 Cube (Set of 3 cubes) SSR Pg No./It No.584/19 |
| 64 | Test of Mortor - Compressive Strength OF C.C. Cube (Set of 3 cubes) SSR Pg No./It No. 585/27 |
| 65 | Test of Ceramic Tiles / Vetrified Tiles - Water Absorption, Moduls of Rapture (Set of 6 Tiles)SSR Pg No./It No. 584/16 |
| 66 | Test of Soil / Murrum -Sieve Analysis. SSR Pg No./It No. 585/29 |
| 67 | Test of Cement - Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness SSR Pg No./It No. 584/1 |
| 68 | Test of Steel 6mm,8mm,10mm,12mm,16mm dia -Tensile strength , %, Elongation, Yield Stress, Weight -Per Meter, Bend/ Rebend Test, Proof Stress. SSR Pg No./It No. 586/77 |
| 69 | ADD 18.00% FOR G.S.T. CHARGES Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender