Tender For Repair/Maint/Replacement Of Pvc/Wooden Wall Paneling/Aluminium Joinery Works At 24 Ed Manauri.
Tender Value
14.90 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
21 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint/Replacement Of Pvc/Wooden Wall Paneling/Aluminium Joinery Works At 24 Ed Manauri.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantaling of existing wall paneling of any type and any thickness complete all as specified and directed. |
| 2 | M&L for 12-15 mm thick PVC/WPC wall panel/ louver panel for /3d wall panel for interior wall décor /echo friendly fluted panel for wall in any design pattern/any colour fixed inclusive of fixing on to wall with neccesssary fittings including cutting of panel for existing electric board/taking down board and refixing if required complete all as specified and directed. |
| 3 | S&F 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. complete all as specified and directed |
| 4 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed |
| 5 | Taking down chowkhat with shutter without taking off shutter from chowkhat of any description not exceeding 1.5 Sqm each complete all as specified and directed |
| 6 | Taking down chowkhat with shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 7 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge |
| 8 | S&F of anodised aluminium frame for doors ,windows, ventilators or fixed frame with one or more rebates including and not to paid separetly joining cleat,screws as requered for fixing etc and for Powder Coating above to (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 9 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, sliding windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete as per architectural drawings and the directions of Engineer-in-charge.. complete all as specified |
| 10 | S&F sheet glass, ordinary quality, of 4 mm thick in squares n exc 0.5 sq. m each pane complete all as specified and directed. |
| 11 | S&F sheet glass, ordinary quality, of 4mm thick in squares exc 0.5 sq. m each pane complete all as specified and directed. |
| 12 | S & F 4 to 5mm thick Aluminium composite pannel high pressure laminated complete all as specified |
| 13 | M&L brick work with sub class 'B' bricks(old size bricks) straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1 : 6 s, complete as specified and directed. |
| 14 | M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement all as specified and directed. |
| 15 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 complete finished even and smooth without using extra cement all as specified and directed. |
| 16 | M & L for preparation of surface and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L preparation of wall and applying two coat of cement based paint on wall over one coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 18 | S& F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire stables, beads or in steel windows,flyproof doors etc. complete all as specified and directed. |
| 19 | S&F of anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including ( and not to paid separetly) necessary joining cleats, glazing clips,glazing anodised aluminum snap beading, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) for powder coating of any colour (Thickness or powder coating not less than 50 micron). complete all as specified & directed. |
| 20 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron).anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including (and not to paid separately) necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading, screws etc. asrequired complete all as specified. |
| 21 | S&F in repair anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15 ) of approved designed/pattern with approved standard section and fixed to the existing window frame with C.P. brass or stainless steel screws @ 200 mm c/c , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction of engineer-in- charge complete all as specified. |
| 22 | Taking down anodised aluminium door shutters, side hung or fixed type any size and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges, anodised section complete including floor door spring hydraulucally regulated completeNote: floor door spring hydraulically shall be measured separetly ( if not repairable) as directed by Eng-in Charge in supply only items |
| 23 | Supply only SS Cover plate hydraulic floor spring door closer single cylinder body embeded,adjustable for aluminium door complete. |
| 24 | S & F solar control film 25 micron reflective type sticked to glass planes as per instructions of manufacturers complete all as specified and directed. |
| 25 | S&F in repair aluminium body door closer hydraulicaly regulated, designation No 1 universal type, suitable for door shutters upto 700 mm in width and of weight no more than 35 kg and fixed complete all as specified. |
| 26 | S&F door lock for aluminium doors 6 lever of iron body ,silver colour with 03 pieces of key,make:Harrison of model H-0609-PK2 dimention 13x5.5x7 cm,360 gram or equivalent complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender