Tender For Construction Of 01(One) Coy-Commander Accommodation (Size- 30X15) Full Wall With Brick Pillar In/C 4 Front Verandah With Galvalume Sheet Roofing Attached Toilet, Tiles Flooring And Septic Tank Etc. At Saidabari Under 15Th Bn Tsr(Ir-Xi).
Tender Value
11.13 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
22265
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Unakoti → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 01(One) Coy-Commander Accommodation (Size- 30X15) Full Wall With Brick Pillar In/C 4 Front Verandah With Galvalume Sheet Roofing Attached Toilet, Tiles Flooring And Septic Tank Etc. At Saidabari Under 15Th Bn Tsr(Ir-Xi).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50.m. - All kinds of soil. |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slop, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | (i) Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: (i) 1:3:6 (1 Cement : 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 4 | (ii) 1:2:4 ( 1 Cement : 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 5 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 (1 Cement : 4 fine sand). |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil |
| 7 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials and required complete:- (i) In cement mortar 1:4 ( 1 Cement : 4 fine sand) |
| 8 | Rainforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete avove plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | First class work in superstructure in triangular, square and rectangular pillars above plinth level including cost of all materials as required complete:- (i) In cement mortar 1:4 (1 Cement : 4 fine sand). |
| 10 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 (1 Cement : 4 fine sand). |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintelas, bands plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- (i) 1:2:4 ( 1 Cement : 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 12 | Centering shuttering including struttings, propping etc. and removal of from work for:(i) Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 13 | Centering shuttering including struttings, propping etc. and removal of from work for:(ii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 14 | Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below ( tolerance +/- 1 mm) with wall thickness 2.0 mm +/- 02 mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames thickness and 3 nops stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-Charge. (i) Extruded section Profile size 48x40mm. |
| 15 | 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2mm +- 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised /plastic brackets of size of size 75x220 mm having wall thickness. The lock rail made up of stainless steel screws. The styles of the shutter reinforced by inserying galvanised MS tube size 20x20 mm and 1mm+- 0.1 mm wall thickness. The lock rail made up of \\"H\\" Section, a UPVC hollow section of size 100x24 mm and 2 mm +- 0.2 mm wall thickness fixed to the shutter styles by means of plastic/ galvanised MS \\"U\\" cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm +- 0.1 mm wall thickness. The galvanised MS rod and fastened with nuts and washersm complete as per maniufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). |
| 16 | Providing wood work in frames of doors, windows, clerestory windows an other frames, wrought framed and fixed in position : Local Teak Wood. |
| 17 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diametere bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 ( 1 Cement : 3 fine sand : 6 graded stone agregate 20 mm nominal size). |
| 18 | Steel work in bult up tubular (round, square or rectangular hollow tubes etc.) trussws etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Hot finished welded type tubes. |
| 19 | Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to steel windows by welding. |
| 20 | 12 mm cement plaster of mix (i) Cement mortar 1:4 (1 Cement : 4 fine sand). |
| 21 | 15 mm cement plaster on the rough side of single or half brick wall of mix: (i) Cement mortar 1:4 ( 1 Cement : 4 fine sand). |
| 22 | 12 mm cement plaster of mix in/c. meat cement punning (i) Cement mortar 1:4 (1 Cement : 4 fine sand). |
| 23 | Proving and fixing on wall face unplasticised Rigin PVC soil, waste & vent pies (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (i) Single socketed pipe- 110 mm OD. |
| 24 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm 2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (i) Single socketed pipe- 75 mm OD. |
| 25 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm 2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (a) Coupler(i) 110 mm |
| 26 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm 2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (a) Coupler(ii) 75 mm |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm 2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (b) Single equal tee with door(i) 110x110x110 mm |
| 28 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm 2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (c) Bend 87.5 defgree(i) 110 mm |
| 29 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm 2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (c) Bend 87.5 defgree(ii) 75 mm |
| 30 | Providing and fixing unplasticised Polyvinyl Chloride (UPVC) pipes including all UPVC plain and brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement outer work. Exposed on wall.(a) 20 mm nominal outer dia. Pipes. |
| 31 | Providing and fixing unplasticised Polyvinyl Chloride (UPVC) pipes including all UPVC plain and brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement outer work. Exposed on wall.(b) 25 nominal outer dia. Pipes |
| 32 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits. (a) 25 mm thick. |
| 33 | Supply & installation of pre-painted Galvalume sheets for roofing/ cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550 mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% AI and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/ AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size(5.5x55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlines, rafters and trussesand including cutting to size and shape wherever required and as per direction of Engineer-in-charge. (i) 0.50 mm thickness. |
| 34 | Supply & installation of pre-painted Galwalume sheets roofing accessories in 550 mpa steel steel grade, make out of cold rolled steel coated with Sinc Aluminium alloy coating of 43.5% Zn, AI and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of midified polyester of 20 micronon both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective gourd film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling/ self tapping screws with EPDM washer complete for Ridges/ valley/ Gutter/ Flashing of width 610 mm:(i) 0.50 mm thickness. |
| 35 | Providing and fixing PVC false ceiling providing SPUF 142-D-01 (Different design 10 mm thick 150 width and necessary length) approved colour concealed type paneled carrier T section (EWUF 106:40x63.5 mm and L section EWUF 405:40x68 mm) with necessary screws, hold fast, wooden beading and M.S. pipe structured 48 mm dia @ 1200 mm c/c including cutting holes and making good walls etc. complete as per direction of Engineer-in-Charge. |
| 36 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:(i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 37 | Providing and fixing white vireous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 ltre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 38 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, botton and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straights, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-Charge. (Glazing and paneling and dash fasteners to be pain for separately):-(a) For fixed portion of approved quality:- Anodised aluminium (anodised trasparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 39 | (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately):- Anodised aluminium (anodised trasparent or dyed to required shade according to IS: 1868, Minimum anodix coating of grade AC 15). |
| 40 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etx. With EPDM rubber/ neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-Charge (Cost of snap beading shall ne pain in basix item): With float glass panes of 4.0 mm thickness (weigth not less than 10.5 Kg/ sqm). |
| 41 | Proving and fitting fixing of C.P brass Twin one stop cock (Royal made) complete as per direction of the Engg. In charge. |
| 42 | Providing and fitting fixing of CP brass hand spray (Royal made) as per direction of the Engg. In charge |
| 43 | Providing and fixing C.P. bib cock of approved quality conforming to IS:8931.-(i) 15 mm nominal bore |
| 44 | Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 45 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622-2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer-in-Charge. (i) 450 mm X 300 mm in all shades and design. |
| 46 | Providing and laying 1st class quality ceramix floor tiles in diffrerent sized (thichness to be specified by the manufacturer) of 1st quality conforming to IS : 15622-2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 Cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 Kg/sqm including pointing the joints with white cement and matching pigment etx. all complete as per direction of the Engineer-in-Charge. (a) Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles(i) 300 mm x 300 mm in all shades and designs. |
| 47 | Providng and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622-2017, of approved make, in all colours and shades, laid over 20 mm thick cement mortar 1:4 (1 Cement : 4 fine sand), jointing with grey cement slurry @ 3.3 Kg/ sqm including grouting the joints with white cement and matching pigments etx. all complete as per direction of the Engineer-in-Charge. (a) Glazed Vitrified Tiles (Glossy/ Mat Finish/ Anti-Skid). (a) Size of tile 600 mm x 600 mm. |
| 48 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/litre, of approved brand nad manufacture to give an even shade [Payment shall be made after submission of Test Certicate issued by the Manufacturer] : (i) New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 49 | Finishing walls with arcrylic smooth exteror paint of required shade shade of approved brand and manufacture [Payement shall be made after submission of Test Certificate issued by the Manufacturer] : New work (two or more coats applied @ 1.67 litre/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm). |
| 50 | Painting with synthetic enamel paint of apporved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacture]: Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture. |
| 51 | Providing and fixing mirror of superior glass (of approved quality) and of required shae and size with plastic moulded frame of apporved make and shade with 6 mm thick hard board backing: (i) Rectangular shape 453x357 |
| 52 | Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender