Tender For Repair And Painting Of The Steel Furniture And Maintenance Of Charpoy Gi Pipe And Tp Furniture Of Hq Sac (U), 17 Fbsu, 257 Su, 340 Tru Under Ge (Af) Trivandrum
Tender Value
32 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
18 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting Of The Steel Furniture And Maintenance Of Charpoy Gi Pipe And Tp Furniture Of Hq Sac (U), 17 Fbsu, 257 Su, 340 Tru Under Ge (Af) Trivandrum
BOQ
| Sl. No. | Item Description |
| 1 | REPAIRS TO STEEL FURNITURES:- General Note to all items mentioned below: The repairs to furniture items shall be done in accordance with BOQ, particular Spn and drawing. The exact dimensions of furniture shall favourably be matched after the repair work, single item of furniture may require multiple BOQ items for completing the entire repair works. However while doing the repair work any small repair work which are essential for the repair work shall deemed to be included in the unit rate quoted to get the furniture in its original design and dimensions. The tenderers are fully be aware of the design of furniture exact repair work to be carried out . |
| 2 | ALMIRAH LARGE STEEL,FD- 1031 / TP |
| 3 | Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as specified , directed and shown on drawing. |
| 4 | Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys.Complete all as specified , directed and shown on drawing..Make of Locks-Godrej/Harrison/Link |
| 5 | Removing UNSV handle from almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as specified , directed and shown on drawing. |
| 6 | Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as specified , directed and shown on drawing. |
| 7 | Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding .Complete all as specified , directed and shown on drawing. |
| 8 | Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as specified , directed and shown on drawing. |
| 9 | Spot gas welding / Continous gas welding on all broken joints in lengths 1 CM Complete all as specified , directed and shown on drawing. |
| 10 | Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine onlyComplete all as specified , directed and shown on drawing. |
| 11 | ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032 |
| 12 | Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as specified , directed and shown on drawing. |
| 13 | Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as specified , directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 14 | Removing UNSV handle from the almirah steel large, S&F new 130mm long chromium plated handle to steel shutters ,Complete all as specified , directed and shown on drawing. |
| 15 | Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as specified , directed and shown on drawing. |
| 16 | Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as specified , directed and shown on drawing. |
| 17 | Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as specified , directed and shown on drawing. |
| 18 | Spot gas welding / Continous gas welding on all broken joints in lengths 1 CM Complete all as specified , directed and shown on drawing. |
| 19 | Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 20 | TABLE OFFICE OFFICER STEEL,FD-1003 / 84M |
| 21 | Removing UNSV top; S&F new top of size 1680mmx870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around duly fixed with adhesive and headless nails . Complete all as specified , directed and shown on drawing. |
| 22 | Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.Complete all as specified , directed and shown on drawing. |
| 23 | Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as specified , directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 24 | Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom Complete all as specified , directed and shown on drawing. |
| 25 | Spot gas welding / Continous gas welding on all broken joints in lengths 1 cm Complete all as specified , directed and shown on drawing. |
| 26 | Material and labour for painting each table office officer steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One Coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 27 | TABLE OFFICE CLERK STEEL,FD-84(M)/1004 |
| 28 | Removing UNSV top carefully;S&F new top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified , directed and shown on drawing. |
| 29 | Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front. Complete all as specified , directed and shown on drawing. |
| 30 | Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as specified , directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 31 | Removing the old broken PVC shoes from the legs of table ,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom Complete all as specified , directed and shown on drawing. |
| 32 | Spot gas welding / Continous gas welding on all broken joints in lengths 1 CM Complete all as specified , directed and shown on drawing. |
| 33 | Material and labour for painting each table office clerk steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 34 | TABLE STEEL 900X900X760MM,FD-1009 |
| 35 | Removing UNSV top from table steel carefully;S&F new top of size 900mmx900mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified , directed and shown on drawing. |
| 36 | Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth Complete all as specified , directed and shown on drawing. |
| 37 | Removing UNSV top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth Complete all as specified , directed and shown on drawing. |
| 38 | Supply and fix new PVC shoe suitable to leg after removing UNSV shoe Complete all as specified , directed and shown on drawing. |
| 39 | Material and labour for painting each table steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 40 | TABLE STEEL 900X600X760MM,FD-1008 |
| 41 | Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified , directed and shown on drawing. |
| 42 | Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth Complete all as specified , directed and shown on drawing. |
| 43 | Removing UNSV top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth Complete all as specified , directed and shown on drawing. |
| 44 | Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front. Complete all as specified , directed and shown on drawing. |
| 45 | Supply and fix new PVC shoe suitable to leg after removing UNSV shoe complete all as specified, as directed and as shown on drawing. |
| 46 | Material and labour for painting each table steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 47 | TABLE STEEL W/O DRAWER 900X600X760MM,FD-1007 |
| 48 | Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified , directed and shown on drawing. |
| 49 | Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth Complete all as specified , directed and shown on drawing. |
| 50 | Removing UNSV top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth Complete all as specified , directed and shown on drawing. |
| 51 | Supply and fix new PVC shoe suitable to leg after removing UNSV shoe Complete all as specified , directed and shown on drawing. |
| 52 | Material and labour for painting each table steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 53 | CHAIR REVOLVING EXECUTIVE TYPE HIGH BACK: TP |
| 54 | Removing the existing torn out leatherette, pressed foam cushion,elastic webbing tape seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 40 density foam sheets of existing thickness,new webbing tape duly covered with new leatherette of approved colour and texture of rate not less than 500 per mtr.The fixing of leatherette shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed. |
| 55 | Removing the existing torn out leatherette cloth from seat and back of chair carefully.S&F new leatherette of approved colour and texture to seat and back of chair to restore the chair in original shape ,the rate of cloth shall not be less than 800 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed. |
| 56 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed . |
| 57 | Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer Complete all as specified , directed and shown on drawing. |
| 58 | Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly, S&F new 5 spokes stainless steel adjustable pedestal assembly to chair computer all as specified and directed . |
| 59 | Removing unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as specified , directed and shown on drawing. |
| 60 | Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth Complete all as specified , directed and shown on drawing. |
| 61 | TABLE COMPUTER ,TP |
| 62 | Removing UNSV top from table computer carefully;S&F new top made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified , directed and shown on drawing. |
| 63 | Removing the existing unservicable key board of table computer by removing the unsv telescopic channel.supply and fix key board attached with new telescopic channel made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified , directed and shown on drawing. |
| 64 | Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse tray18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified , directed and shown on drawing. |
| 65 | Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.Complete all as specified , directed and shown on drawing. |
| 66 | Removing UNSV/damaged drawer complete from Table computer and supply and fix new drawer made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.The drawer shall be provided with decorative knob. Complete all as specified , directed and shown on drawing. |
| 67 | CHAIR AUDITORIUM PUSH BACK, TP |
| 68 | Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by 40 density foam sheets of existing thickness, new webbing tape, new PVC lipping duly covered with new tapestry cloth / LEATHERETTE GOOD QUALITY of approved colour and texture of rate not less than 1000 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film. Complete all as specified , directed and shown on drawing. |
| 69 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed . |
| 70 | Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth and fix it back in the row of chairs Complete all as specified , directed and shown on drawing. |
| 71 | CHARPOY GI PIPE WITH PLY TOP, FD-220 / 220 ® |
| 72 | Taking out existing unserviceable / broken plywood from the charpoy GI pipe by unscrewing nut, washer and flat iron. Tightening each part of the entire frame of charpoy by using pipe wrench and supply and fixing new 12mm thick plywood BWR grade-AAA made of size 1980mm x 900mm fixed over the GI pipe frame and fixing 3 components (i.e- ply, flat iron and rail) with new GI nylon insert nut, bolt and washers 8mm dia 62mm to 65mm long Complete all as specified , directed and shown on drawing. |
| 73 | CHAIR VERANDAH:-, FD-256, FD/MAP-II/06 |
| 74 | Spot gas welding to broken parts/joints of chairs Complete all as specified , directed and shown on drawing. |
| 75 | Removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.The canning shall only be done after painting the chair Complete all as specified , directed and shown on drawing. |
| 76 | Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair Complete all as specified , directed and shown on drawing. |
| 77 | Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing one flat iron of size 20mmx5mm in support of PVC seat at centre between two sides through proper welding .The PVC seat shall got approved from GE before supply.The PVC seat shall be fied only after painting the chair Complete all as specified , directed and shown on drawing. |
| 78 | Painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The chair frame shall be made smooth by applying metal putty wherever required Complete all as specified , directed and shown on drawing. |
| 79 | CHAIR STEEL TUBULAR WITH ARM:FD-75(M) |
| 80 | Scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. Complete all as specified and as directed. |
| 81 | Remvoing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat Complete all as specified , directed and shown on drawing. |
| 82 | Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm Complete all as specified , directed and shown on drawing. |
| 83 | Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm Complete all as specified , directed and shown on drawing. |
| 84 | Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg Complete all as specified , directed and shown on drawing. |
| 85 | Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg Complete all as specified , directed and shown on drawing. |
| 86 | Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg Complete all as specified , directed and shown on drawing. |
| 87 | CHAIR STEEL TUBULAR WITHOUT ARM: FD-75(M) |
| 88 | Scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. Complete all as specified and as directed . |
| 89 | Removing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat Complete all as specified , directed and shown on drawing. |
| 90 | Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm Complete all as specified , directed and shown on drawing. |
| 91 | Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm Complete all as specified , directed and shown on drawing. |
| 92 | Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg Complete all as specified , directed and shown on drawing. |
| 93 | Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg Complete all as specified , directed and shown on drawing. |
| 94 | CHARPOY IP HARD TOP,FD/MAP-II/01 |
| 95 | Removing of old unserviceable Top ,Supply and fixing new top made of 12mm thick BWR Plywood grade-AA of size 1980mmx900mm fixed 12x Nos of 50mm long 8mm dia flat head nut , bolts and washers. Complete all as specified , directed and shown on drawing. |
| 96 | Spot gas welding / Continous gas welding on all broken joints in lengths 1cm Complete all as specified , directed and shown on drawing. |
| 97 | Material and labour for painting each Charpoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 98 | CHARPOY MS SQUARE PIPE PLYTOP, TD/65/06 |
| 99 | Removing of old unserviceable Top ,Supply and fixing new top made of 12mm thick BWR Plywood grade-AA of size 1980mmx900mm fixed 12x Nos of 50mm long 8mm dia flat head nut , bolts and washers. Complete all as specified , directed and shown on drawing. |
| 100 | Spot gas welding / Continous gas welding on all broken joints in lengths 1 CM Complete all as specified , directed and shown on drawing. |
| 101 | Material and labour for painting each Charpoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. One coat of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. The painting to each article shall only be carried out by spray machine only Complete all as specified , directed and shown on drawing. |
| 102 | CHAIR REVOLVING, TP |
| 103 | Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 400 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified , directed and shown on drawing. |
| 104 | Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 400 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed. |
| 105 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed . |
| 106 | Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair revolving godrej Complete all as specified , directed and shown on drawing. |
| 107 | Removing unserviceable pedestal assembly,S&F new pedestal assembly having five arms with twin wheel castor wheels having wheel base not less than 70 cms.Complete all as specified , directed and shown on drawing. |
| 108 | Removing unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as specified , directed and shown on drawing. |
| 109 | Painting to all steel portion of chair revolving with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as specified , directed and shown on drawing. |
| 110 | CHAIR COMPUTER REVOLVING, TP |
| 111 | Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 400 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed. |
| 112 | Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 400 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed. |
| 113 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed . |
| 114 | Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair revolving godrej. Complete all as specified , directed and shown on drawing. |
| 115 | Removing unserviceable pedestal assembly,S&F new pedestal assembly having five arms with twin wheel castor wheels having wheel base not less than 70 cms.Complete all as specified , directed and shown on drawing. |
| 116 | Removing unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as specified , directed and shown on drawing. |
| 117 | Painting to all steel portion of chair revolving with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as specified , directed and shown on drawing. |
| 118 | CHAIR WRITING ,FD/E6/MAP/12, TP |
| 119 | Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 400 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified , directed and shown on drawing. |
| 120 | Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 400 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified , directed and shown on drawing. |
| 121 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed . |
| 122 | Spot gas welding / Continous gas welding on all broken joints in lengths 1 CM Complete all as specified , directed and shown on drawing. |
| 123 | Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth Complete all as specified , directed and shown on drawing. |
| 124 | BED PLY STEEL TOP (FD/E6/MAP/08(R) |
| 125 | Removing of old unserviceable PVC Shoes,Supply and fixing new High quality hard PVC shoes of size 38mm x 38mm,Complete all as specified , directed and shown on drawing. |
| 126 | Removing of old unserviceable head board ,Supply and fixing in position with new cut piece at head board of size 638mm x 201mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw.Complete all as specified , directed and shown on drawing. |
| 127 | Removing of old unserviceable prelaminated particle board from foot board,Supply and fixing in position with new cut piece at foot board of size 638mmx314mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw Complete all as specified , directed and shown on drawing. |
| 128 | Removing of old unserviceable ply top,Supply and fixing in position with new top of 12mm thick Plywood BWR grade -AA of size 1974mm x 824mm duly fixed with 12 x Nos of 50mm long 8mm dia flat head nut , bolts and washers.Complete all as specified , directed and shown on drawing. |
| 129 | Spot gas welding / Continous gas welding on all broken joints in lengths 1 CM Complete all as specified , directed and shown on drawing. |
| 130 | Painting the frame of the Bed Ply Top Steel with one coat of black hammer tone paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth. The Bed Ply Top Steel frame shall be made smooth by applying metal putty on etched surface only where required Complete all as specified , directed and shown on drawing. |
| 131 | Material and labour for painting to articles of steel furniture by adhering to following steps,Complete all as specified , directed and shown on drawing. :-a) The existing surface of each steel article shall be made smooth by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it again to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of Hammer tone paint to be done as per shade approved in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. b) The painting to each article shall only be carried out by spray machine only.c) The work will be excecuted at BSO FY/various units locations/residential accn or inside/outside restricted area as per user requirement. |
| 132 | Almirah Large steel / Storewell, TP |
| 133 | Almirah med steel with shelves / Storewell, TP |
| 134 | Almirah small steel / Storewell, TP |
| 135 | Book Case large Steel, FD-90M /1028/ 69 / TP |
| 136 | Rack 6 Tier Steel Adjustable, FD- 106 / 106(M), 1038, TP |
| 137 | Side rack with tray 3 spaces, FD-1023 |
| 138 | Stool Steel, FD-81 (M) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender