Tender For special Repair To Certain Buildings At Chamkot, Baghbela, Kalsuri And Provn Of Geysers At Tangdhar Under The Aor Of Ge 874 Ews.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
7 days left
EMD
98600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Certain Buildings At Chamkot, Baghbela, Kalsuri And Provn Of Geysers At Tangdhar Under The Aor Of Ge 874 Ews.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Jul-2026 | Amdt in critical dates | Date | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws including dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall, as specified etc complete all as specified and as directed |
| 2 | All as per item No 59 above herein before but plain sheet. |
| 3 | S& F Hallow PVC wall and ceiling lining consisting of 5 to 6 mm thick plain colour PVC sheet with fillets of width 20mm like L and U inclusive to make PVC frame for walls and ceilings including dismantling of old panelling, boardings of any description complete all as specified and as directed |
| 4 | M&L for weather boarding of second class soft wood, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap to replace old or decayed boarding including dismantling wall and ceiling board of any description including cover fillets and removing from site complete all as specified and directed. |
| 5 | M&L for applying two coats of synthetic enamel paint including cleaning dusting of new or previously untreated, priming surfaces of wood /ply wood base surfaces for wall, door, window, ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and as directed. |
| 6 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, with Walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 7 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6. Including demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and as directed |
| 8 | M&L for rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and as directed |
| 9 | M & L applying two coats of cement based paint on newly plastered or un plastered wall surface including preparation of surfaces, complete all as specified and as directed |
| 10 | M &L for second class soft wood as in scantling clean sawn fixed in position including dismantling of timber scantlings 40 sqcm and over in sec, in any position, in unframed/framed complete all as specified and as directed |
| 11 | Description All as per item No 590 above item but except wood. |
| 12 | M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 13 sqcm & n exc 25 sqcm, second class soft wood (Kail) clean sawn complete all as specified and as directed |
| 13 | Demolition of cement concrete (Un-reinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level, complete all as specified and as directed |
| 14 | M&L for Chequered cement concrete tiles 20 cmX20 cmX25 mm thick sat jointed and pointed in neat cement slurry in floor with grey cement and no pigments with 1:4, 25 mm thick screed bed complete all as specified and as directed |
| 15 | M&L for 75 mm thick plinth protection in/Subbase PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed. |
| 16 | M&L for 75mm thick plain Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) in sub base flooring complete all as specified and as directed |
| 17 | M&L for 25mm thick cement concrete 1:2:4, type B-1, as in sub base under floor and finished rough surface complete all as specified and as directed |
| 18 | M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and as directed |
| 19 | M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm and n. exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed. |
| 20 | M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and n. exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed. |
| 21 | M&L for glazed ceramic coloured tiles (450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed. |
| 22 | M&L RCC nominal mix type B0 1:2:4 in beams, cantilever, bressummer, lintels over 1.5m span including demolition of reinforced concrete of any description and in any position not otherwise, complete all as specified and as directed |
| 23 | Supply and fixing 5 mm dia up to 10 mm dia and over mild steel TMT bars, cut to length, bent to shape required cranking bending and binding with and including mild steel wire annealed not less than 0.90 mm dia. complete all as specified and as directed |
| 24 | Taking down chowkhats or frame exc. 1.5sqm and n. exc. 4 sqm each with shutter (without taking out shutters from the frame) complete all as specified and as directed |
| 25 | Taking down chowkhats or frame n. exc. 1.5sqm each with Shutter (without taking out shutters from the frame) complete all as specified and as directed |
| 26 | M&L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints complete all as specified and as directed |
| 27 | S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed. |
| 28 | M&L for second class soft wood, 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator complete all as specified and as directed |
| 29 | S&F for 100mm long stainless steel butt hinges medium weight cold rolled complete all as specified and as directed |
| 30 | S&F 200mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and as directed |
| 31 | S&F 200 mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and as directed |
| 32 | M&L for Aluminium handles cast type anodised 100mm long complete all as specified and as directed |
| 33 | S&F 100mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and as directed |
| 34 | S&F aluminium handles, cast type, anodized 150mm long complete all as specified and as directed |
| 35 | S&F 2nd class soft wood of 30mm thick shutter plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (feather edge) of veneered particle board medium density wood particle board with commercial face veneers fitted to chowkats complete all as specified and as directed |
| 36 | S&F galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, fixed in repairs, complete all as specified and directed. |
| 37 | S&F vitreous China wash basin, white, flat back, size 550x400mm including waste chain & plug and porcelain stopper and including brackets, waste pipe, etc complete all as specified and as directed |
| 38 | S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) complete all as specified and as directed |
| 39 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed |
| 40 | S& F Brass CP mixer for mixing hot & cold water screwed down for iron pipe in walls and WHB fixed in repair complete all as specified. |
| 41 | Supply and fix, towel rail 600 mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and directed. |
| 42 | S & F 600 mm x 450 mm size bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 43 | Supply & fix in repair PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe complete all as specified and directed. |
| 44 | Supply and fix, grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and directed. |
| 45 | S&F in repair one piece vitreous China water closed pan (pedestal pattern including integrated flush tank, white coloured including traps fitted in floors complete all as specified and as directed |
| 46 | Supply and fixing in repairs PVC (SWR) 110mm bore as soil waste and vent pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed |
| 47 | All as per srl item No 46 above but 75mm bore complete all as specified and as directed |
| 48 | Supply and fixing PVC (SWR) bends, T any radius for 110mm pipe complete all as specified and as directed. |
| 49 | All as per item No 48 above but for 75mm pipe complete all as specified and as directed. |
| 50 | M&L for GI steel water tubing medium grade galvanized with all fittings and fixed complete to walls, or laid on floors, bore of tube 15mm including taking up or down steel tubing and connections complete all as specified and directed |
| 51 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 52 | Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds etc, glazed with putty or fixed with beads complete all as specified and as directed. |
| 53 | S&F Pillar tap 15mm bore cast copper alloy, with capstan head chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 54 | S&F in repairs Vitreous China bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia complete all as specified and directed. |
| 55 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia complete all as specified and as directed. |
| 56 | Dismantling water tanks exc 500 and n exc 1000 ltr and removing to store M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including float valve and fittings of 500 ltrs capacity complete all as specified and directed. |
| 57 | S&F ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed |
| 58 | M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed Please Enable Macros to View BoQ information |
| 59 | M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender