Tender For Periodical Service And Reapair To Joinery , Flooring ,Wall Tiles, Plumbing ,Saniatry Fitting , Abestos Sheet Roofing,Cleaning Of Oht By Usinguv Technology And Water Proofing Treatment In Dad Md Accn , Cda Office , Pao(Or) (Aoc & Eme) Under
Tender Value
49 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
1 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Service And Reapair To Joinery , Flooring ,Wall Tiles, Plumbing ,Saniatry Fitting , Abestos Sheet Roofing,Cleaning Of Oht By Usinguv Technology And Water Proofing Treatment In Dad Md Accn , Cda Office , Pao(Or) (Aoc & Eme) Underage B/R (S) No I Of Ge South Secunderabad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and as directed. |
| 2 | M & L for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and as directed. |
| 3 | M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and as directed. |
| 4 | All as per item No 03 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed. |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 6 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 7 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed. |
| 8 | M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges kitchen plateform etc of rough finished flat surfaces concrete complete all as specified and as directed |
| 9 | M&L for reinforcement cement concrete type B0 (1:2:4) 12.5mm using graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors roofs, landings, balconies canopies, deck slabs and in shelves, kitchen shelfetc complete all as specified and as directed. |
| 10 | S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed. |
| 11 | Demolition of filled materials (cinder concrete/lean concrete from Sunken floors and removing from site to a distance n.exc 500 Mtr complete all as specified and as directed. |
| 12 | M & L for rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including mixing of WPC finished even and smooth without using extra cement complete all as specified and as directed. NOTE: WPC will be measured and paid separately including taking down of old plaster. |
| 13 | Cleaning the surfaces thoroughly from dust, dirt & projections and applying a coat of hot blown bitumen 85/25 @ 1.2Kg/SQM over a coat bituminous primer @ 0.3 lit per sqm in sunken floor complete all as directed and as specified. |
| 14 | M & L for PCC (1:5:10) type E2 (using 40 mm graded crushed stone aggregate) as Sunken in filling and mass concrete complete all as directed and as specified. |
| 15 | Supply only Integral Water proofing Compound complete all as specified and as directed. |
| 16 | Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and as directed. |
| 17 | Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and as directed. |
| 18 | S & F Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed . |
| 19 | S & F Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed . |
| 20 | M & L for PCC 1:2:4 Type B0 ( using 12.5 mm graded crushed stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed . |
| 21 | M & L for cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork. complete all as specified and as directed. |
| 22 | S&F of factory made 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 23 | S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a), supplied and fitted to chowkats.complete all as specified and as directed. |
| 24 | M&L in repairs for 18mm thick plywood of grade (BWR), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and as directed. |
| 25 | M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish colour and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed. |
| 26 | S&F in Continuous (piano) mild steel width of flap 30mm bright finish or electro galvanised.complete all as specified and as directed. |
| 27 | S&F in repair 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets and fancy type knob, stops, rollers etc complete all as specified and as directed . |
| 28 | S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per complete all as specification and as directed |
| 29 | S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed. |
| 30 | S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 31 | S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 32 | S & F powder coated aluminium sliding window three track frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three track with stainless steel mosquito proofing and glazing shutter and incl 5.5mm thick tinted glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips frame made with aluminium section as appended below and following items deemed to include: -(i) Window frame 68.4x38mm x 1.15 thick for three tracks.(ii) Top/bottom rail and style /rail of shutter: 15x37.5x1.15 mm thick and over.(iii) Aluminium beading -0.7 mm thick(iv) Aluminium grill with Bulb height 4.5 mm square shape fixed on frame including necessary fixing arrangement like U-clip, flat aluminium section matching with window & dia of grill as directed.(v) Stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section with aluminium wire staples complete.(vi) Aluminium fitting such aluminium suitable handle with auto interlock cap with suitable size(vii) Making good of wall surface with silicon to match with existing surface complete all as specified and directed.Note : Measurement taken as whole for payment purpose |
| 33 | M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed . |
| 34 | M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 35 | S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed. |
| 36 | S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 37 | S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed. |
| 38 | S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed. |
| 39 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 40 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed |
| 41 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. |
| 42 | M&L for precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded crushed stone aggregate) and setting in cement mortar (1:6) complete all as specified and as directed. |
| 43 | M & L in repair for high density pipe 40 mm dia (HDPE) pressure rating 6 Kg F / Sqcm fixed to wall and floors etc complete fixed complete all as specified and as directed. |
| 44 | S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified and as directed. |
| 45 | S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed. |
| 46 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed. complete all as specified and as directed. |
| 47 | S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia.complete all as specified and as directed. |
| 48 | S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup.complete all as specified and as directed. (Make : Prayag Cart Part No PIS-12 H) or equivalent. |
| 49 | S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup.complete all as specified and as directed. (Make :Prayag or equivalent) |
| 50 | S&F in repairs 3 in 1 wall mixer with provision of both handshower and overhead shower with 115mm long Bend pipe complete all as specified and directed.Make: Hindware Cat No F370022 or equivalent of Jaquar and Parryware or equivalent. |
| 51 | S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed. |
| 52 | S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and as directed. |
| 53 | S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 54 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with inlet ball valve float flush pipe and handle including brackets complete all as specified and as directed. |
| 55 | S&F in repairs vitreous china ware wash down white Single piece water closet pan any type of size 69 x 36 x 74 cm fixed with soft close seat cover(pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and directed.Make: Hindware(Tozzo) or equivalent in Jaquar and Parryware. |
| 56 | S&Fin repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 57 | S&F in repairs PVC connection 15 mm dia and 600 mm long with bolt and PTMT nuts complete all as specified and as directed. |
| 58 | S&F in repairs looking mirror 600 x 450 mm bevelled edge of selected quality glass, mounted on 6mm thk AC bldg board or commercial ply wood & fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 59 | S&F in repair of Chromium plated tubular towel rail 20mm dia 600mm long between flanges fixed with suitable steel screw etc complete all as specified and as directed. |
| 60 | S&F in repair chromium plated gratings 100mm dia with provison of with or without hole , fixed with suitable solvent cement etc complete all as specified and as directed. |
| 61 | S&F in repairs 32mm dia PVC waste pipe 1.20 mtr long for wash hand basine/urinal/sink of pressure rating 10 kgf/sqm complete all as specified and as directed. |
| 62 | S&F in repairs 40mm dia PVC waste pipe 1.20 mtr long for wash hand basine/urinal/sink of pressure rating 10 kgf/sqm complete all as specified and as directed. |
| 63 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan- necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).complete all as specified and as directed. |
| 64 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed. |
| 65 | S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 66 | S&F for 110mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed. |
| 67 | S&F for 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified and as directed. |
| 68 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 69 | S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed. |
| 70 | S&F for 75 mm dia PVC (SWR) grade bends of any radius.complete all as specified and as directed. |
| 71 | S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius.complete all as specified and as directed. |
| 72 | S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia.complete all as specified and as directed. |
| 73 | S&F PVC (SWR) vent cowl, 75mm dia.complete all as specified and as directed. |
| 74 | M&L for PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed. |
| 75 | S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc in cluding taking down complete all as specified and as directed. |
| 76 | S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc in cluding taking down complete all as specified and as directed. |
| 77 | S&F in repairs for providing 25mm dia CPVC gate valves screwed both ends for iron pipes complete all as specified and as directed. |
| 78 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 79 | S&F rotational moulded Polyethylene [HDPE] water tanks, Triple layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed. |
| 80 | S&F rotational moulded Polyethylene [HDPE] water tanks, Triple layered, ISI Marked Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed. |
| 81 | Cleaning of RCC/PVC water tanks with bleaching powder removing all scale and dirt etc from tank and from mouths of circulating pipes, etc including writing with paint out side tanks \\"tanks cleaned on with month and year capacity of tanks exc 250 & n. exc 500 ltrs and recconecting air lock complete all as specified and as directed. |
| 82 | Cleaning of RCC/PVC water tanks with bleaching powder removing all scale and dirt etc from tank and from tanks and from mouths of circulating pipes, etc including writing with paint out side tanks \\"tanks cleaned on with month and year capacity of tanks exc 500 & n. exc 1000 ltrs and recconecting air lock complete all as specified and as directed. |
| 83 | S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 84 | Taking down cement plaster from walls built in cement mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc. to receive plaster. complete all as specified and as directed. |
| 85 | M&L for rendering 15 mm thick on fair face surfaces of brick work or concrete in CM (1:4) finished even and smooth without using extra cement.complete all as specified and as directed . |
| 86 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) even and smooth without using extra cement complete all as specified and as directed. |
| 87 | M&L for rendering 5 mm thick in ceilings in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed. |
| 88 | M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coat of cement base paint complete all as specified and as directed . |
| 89 | M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coat of Oil bound distemper over a coat of primer complete all as specified and as directed . |
| 90 | M & L for preparing new plastered or unplastered surfaces on ceilings including cornices and applying three coat of white wash complete all as specified and as directed . |
| 91 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 92 | M & L for preparing old plastered or unplastered surfaces of ceilings including cornices and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 93 | M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of acrylic emulsion distemper including filling cracks/ undulated surfaces with wall care putty wherever required complete all as specified and as directed. |
| 94 | M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying two coat of acrylic emulsion distemper including filling cracks/ undulated surfaces with wall care putty wherever required complete all as specified and as directed. |
| 95 | M & L for preparing old plastered or unplastered surfaces on walls/ceiling including cornices and applying one coat of cement based paint complete all as specified and as directed. |
| 96 | M & L for preparing old plastered or unplastered surfaces on walls/ceiling including cornices and applying two coat of cement based paint complete all as specified and as directed. |
| 97 | M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 98 | M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 99 | M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of exterior emulsion paint (weather coat paint) complete all as specified and as directed. |
| 100 | M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying two coat of exterior emulsion paint (weather coat paint) complete all as specified and as directed. |
| 101 | M&L for complete removal of the existing any type old treatment on walls/ceiling surfaces, applying a coat of alkali resistant priming paint followed by applying Birla wall care putty and making the surfaces smooth and even with sand paper and finally applying two coat of acrylic emulsion distemper complete all as specified and as directed . |
| 102 | M&L for uprooting of wild trees such as grass/bushes etc from the roof / wall surfaces / AC sheets/soil pipes surrounding including its penetrated roots with suitable cleaning chemical and making good to the damaged plaster by providing CM 1:3 and finish the surfaces to match with the existing surface complete all as specified and as directed. |
| 103 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified and as directed. |
| 104 | M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and as directed. (Note : Colour of granite shall be as approved by Engr-In-Charge) |
| 105 | Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and as directed. |
| 106 | S&F in repairs for plate rack of stainless steel of size 31X36X10 (inch) with steel sleevs & hanging arrengement for utensile, complete all as specified and directed |
| 107 | S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and as directed. |
| 108 | Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor, roof incl tarfelt etc and removing from site to a distance n.exc 500 Mtr complete all as specified and as directed. |
| 109 | M&L for 40mm thick plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in padding (level course) on roof incl finishing the cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed. |
| 110 | M & L for 10 mm thick cement plaster 1:3 with WPC laid over the RCC roof slab complete all as specified and as directed.NOTE: WPC will be measured and paid separately including taking down of old plaster. |
| 111 | M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.6kg/sqm 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown and one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof with plaster, sunken slabs, edges and vertical surfaces complete all as specified and as directed. |
| 112 | M&L for applying a coat of aluminium paint over Bitumen surface complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender