Tender For Balance Portion Of Common Facility Centre For Playground At Muftifbagh Gandtal
Tender Value
39.84 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
4 days left
EMD
79680
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Portion Of Common Facility Centre For Playground At Muftifbagh Gandtal
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 cement, 6 coarse sand) |
| 2 | Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform |
| 3 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) |
| 4 | P/L in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size |
| 5 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood |
| 7 | Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws excluding panelling 2nd cass Kail wood 35mm thick (test check certificate by duly vetted by forest deptt) |
| 8 | Providing and fixing of Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked |
| 9 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 10 | Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. |
| 11 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 13 | 12mm Cement Plaster of mix 1:4(1 cement:4 coarse sand) |
| 14 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thk |
| 15 | 1mm thk |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 17 | Wooden planking, in flooring including fixing with iron screws and heavey quality adesive and 6mm thick foam complete: 8 mm thick imported wood |
| 18 | Finishing walls with Acrylic smooth exterior paint of required shade: New work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) one or two coats of snow sem coatings to give an even shade |
| 19 | Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 20 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade |
| 21 | Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work over priming coat |
| 22 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.2 Welded |
| 23 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of he sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 24 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm |
| 25 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 26 | Providing and fixing plained eaves boarding. 2nd class Deodar wood 250x32 mm (nominal size) (test check certificate by duly vetted by forest deptt) |
| 27 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 28 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 29 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 30 | Providing & fixing 30mm thick wire gauze shutters using galvanised MS wire aperture1.4mm wire dia 0.63mm for doors & windows and clerestory windows incld bright finished/ black enamelled M.S Butt hinges with necessary screws Second class Kail wood (test check certificate by duly vetted by forest deptt) |
| 31 | Providing and fixing glazed shutters for windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood (test check certificate by duly vetted by forest deptt) |
| 32 | Providing and fixing of glass panes, with wooden fillets wherever necessary thickness 4.0 mm |
| 33 | P/F of 12mm thick heavy duty Ornamental hardware items incl cost necessary screws etc a)Tower bolts 100mm |
| 34 | b)Handle 125mm |
| 35 | c) I Hook 125mm |
| 36 | d)Tower bolts 200mm |
| 37 | e)Handle 200mm |
| 38 | f) Iron L-type AL-drop Lock |
| 39 | Providing and fixing soil waste pipes (10Ft Long) 100mm dia PVC B Class |
| 40 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, |
| 41 | BOLSTERS |
| 42 | Providing and fixing vent pipes 75mm dia PVC B Class |
| 43 | PVC colour 100 mm |
| 44 | P/F of PVC floor trap with CP grating |
| 45 | Providing and fixing G.I pipes B Class compleate with G.I fittings including all necessary fittings like Sockets, Tee, Reducer etc 20mm dia nominal bore External work including trenching, refilling etc. |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings and including all necessary fittings like Sockets, Tee, Reducer. (This includes testing of joints complete as per direction of Engineer-in charge) Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4) |
| 47 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 48 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 49 | Stain less steel heavy duty Bib cock long nose of jaquar quality |
| 50 | Stain less steel heavy duty angle valve of jaquar quality |
| 51 | Providing and fixing 50mm Dia PVC Pipe for disposal of waste water from Wash basan |
| 52 | P/F Mirror 2' x 3' including frame PVC |
| 53 | Providing and fixing wash basin with pedestal and C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 54 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 liter white P.V.C automatic flushing cistern. |
| 55 | P/F Gyzer of ISI with approved quality and make and all necessary fitting and fixtures 50 lit Gyzer with PVC connection and Gyzer Bolt |
| 56 | 25 lit Gyzer with PVC connection and Gyzer Bolt |
| 57 | P/F of CP Soap case stainless steel |
| 58 | P/F of CP Towel Hanger |
| 59 | P/F of CP over head shower |
| 60 | P/F of stainless steel sink 600x450x250 mm |
| 61 | P/F of CP sink mixer |
| 62 | P/F of CP wall mixer |
| 63 | Carriage of materails By Mech.Transport, from source to site of work for an avg lead of 15 km Stone agg. & sand |
| 64 | Bricks for an avg lead of 30 km |
| 65 | Wiring for light point/ fan point/exhaust fan point with 1.5.sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit ,with modular switch(Anchor roma urban /eq.make), ,suitable modular GI box and earthing the point with 1.5 sq mm FRLS /HFFR PVC insulated copper conductor single core cable etc as required (Havells /Legrand/roma urban/Eq.make as par ISI Standard Note The GI boxes can be of different sizes of Modulues to hold the Modular Boxes and Modular Switches for lights/fans/exhaust fans and are included in the point rate |
| 66 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,including providing and fixing 2 Nos 3 pin 5/6 A modular socket outlet and 2 Nos 5/6 A modular switch, connections etc. as required. |
| 67 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6/3 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.Schneider /ABB /L&T /Honeywell/Eqt.makeas per IS standard |
| 68 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate asrequired.Schneider /ABB /L&T /Honeywell/Eqt.make as per IS standard |
| 69 | Supply and Fixing of MS deep Junction Box for LED Lights and Fans of sizes/ways as per requirement |
| 70 | Supply of fixing of 20/25/32 mm size PVC condute along with accessories(bends,sockets,iron staples/saddles/screws,pvc fastener etc) in surface /recess include in cutting the wall and making good the same by cement sand and paint in case of recessed /Surface condute asrequired for Walls/slab |
| 71 | Supply ,fixing,drawing testing and commissioning of following sizes FRLS/HFFR PVC insulated copper conductor (Havells/Anchor/Eq.make),single core cable in existing surface /recessed medium class PVC conduit.3x2.5 sqmm Note This includes Three wires (Phase,Neutral and Earth) and 1 Ckt meter is equivalent to 3 meters for 6A sockets and inverterckts |
| 72 | 3x4 sqmm Note This includes Three wires (Phase,Neutral and Earth) and 1 Ckt meter is equivalent to 3 meters for Heating Sockets/ACsockets |
| 73 | 3x4 sqmm Note This includes Three wires (Phase,Neutral and Earth) and 1 Ckt meter is equivalent to 3 meters For Lighting SubMain/Inverter Sub Main |
| 74 | 4X 10 sq. mm + 2X 6 sq. mm earth Note This includes 6 wires (3 Phase,1 Neutral and 2 Earth) and 1 Ckt meter is equivalent to 3 metersFor Heating Sub Main |
| 75 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. As required. Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. |
| 76 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. |
| 77 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But withoutMCB/RCCB/Isolator 16 way , Double door |
| 78 | Supplying and fixing of following ways surface/ recess mounting, Horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . 4way (4 + 12), Double door |
| 79 | Supplying and fixing following rating, Four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. 63-40 amps |
| 80 | Supplying and fixing following rating, Four pole, 415 V, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard 63 amps |
| 81 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider/L&T/Eqt. as per IS Standard. Single pole |
| 82 | Double pole 32-40 amp C curve MCB |
| 83 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 84 | Supply, Laying and Commossioning of 2 Core 16 sqmm sqmm AL Armoured PVC insulated and PVC sheathed / XLPE power cable of 1.1kV grade (For Conversion of 1-Phase into 3 Phase) |
| 85 | Supplying and fixing modular Indicator Lamp on the existing modular plate & switch box excluding modular plate as required. |
| 86 | Supply, Installation, Testing and commissioning of 12-15 watt LED surface mounted Down lighters having Aluminium Body ,minimum lumens 100 lm/w ,the luminaries housing should be aluminium and the luminary optics shall have a high efficiency with transmittance,average life of 50000 hrs operating temperature -10 C to + 45 C of Phillips/Havells /Eqt.make as per IS standard, incl making of necessary Connections.. The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 87 | SITC of Recessed LED 15 watts 1'x1' panel light fitting made of CRCA with PS diffuser. Fixture should have minimum efficacy at System level (Not Chip Level) >=105 lumens/watt . Luminaire should have Life of 50000hrs@L70B50 Lumen maintenance, CCT up to 6500K (SDCM<5), THD<10% at full load, CRI >80, PF >0.95 and an operating Voltage Range of 140 - 270 Internal Surge Protection 2.5KV. Luminaire should have SDCM<5. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 - 13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. |
| 88 | Supply, Installation testing and commissioning of 1200mm sweep Ceiling Fans of Crompton Greaves / Havel's / Usha /Bajaj make Completeincl making of necessary connections. |
| 89 | Supply, Installation testing and commissioning of 900mm sweep Ceiling Fans of Crompton Greaves / Havel's / Usha /Bajaj make Completeincl making of necessary connections. |
| 90 | Supply, Installation testing and commissioning of 200-230 mm sweep Shutter type Exhaust Fans of Usha / Crompton Greaves / Havel's/BAJAJ with ceiling rose of SSK make incl making of necessary connections and making of necessary space in walls / Windows as persite. |
| 91 | Supply installation testing and comm. Of 3 phase 415 V 200 ampere Bus Bar Tap off Box metal enclosed inclusive of 200 amp 4 strip Al bus bar 1 No.(3 for phases ,1 for neutral) |
| 92 | Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor)ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container)and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (Pulse Width modulation)Technology. The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be<5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shallbe kva rating x 1 )however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitablefor incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute. Operatingtemperature 0 to 40 0C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance,Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current,short circuit, battery deep discharge , 10 KV surge.Display for watt/VA,Amp and Voltage power parameters etc.UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part Iand Part 2, it shall be aVoltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3) .The UPS should be with IGBT Based Inverter Technology, Communication RS232/ RS485/ SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all requiredaccessories areinclusive in the cost.a)3 KVA |
| 93 | Supply,Installation,Testing and Commissioning of Air Cooled Hi Wall split type Air conditioner(Both Cooling and Heating Inverter Type 1.5 TR with 3 Star BEE Rating) complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz, 1 phase AC supply. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply :Electrical cable IS 694 or IS 9968 temperature sensing control IS/International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part I|2023. The system shall be able to operate up to 50 °C (out door ambient temperature). |
| 94 | SITC of 4kVA Heavy duty Wall mounted Mainline Copper Automatic Voltage Stabilizer for use upto 1.5 TR with input volatge working range 130-300 V and stabilized output voltage with Low and high volatge protection ,integrated Time delay system of 5-10 seconds,Multifunctional Digital Display having 2 years of warranty of stndard make |
| 95 | Provision for sign boards, Photographs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender