Tender For Fabrication Of Cable Trays And Ms Rack At Acid Area.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
11 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication Of Cable Trays And Ms Rack At Acid Area.
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication of cable trays and MS rack at acid area. |
| 2 | Supply of MS angle 65 x 65 x 8 mm: The scope of work includes supply of MS angle 65 x 65 x 8 mm as per IS:2062. |
| 3 | Supply of MS angle 50 x 50 x 6mm: The scope of work includes supply of M.S. angle of size 50 x 50 x 6mm as per IS:2062. |
| 4 | Supply of MS flat 30 x 4 mm: The scope of work includes supply of M.S. flat 30 x 4 mm as per IS:2062. |
| 5 | Supply of MS chequered sheet 6mm : The scope of work includes supply of M.S.chequered sheet 6mm as per IS:2062. |
| 6 | Fabrication of cable tray : The scope of work includes fabrication, painting and erection of ladder type cable tray of size up to 1000mm and cable tray supports using items supplied vide Sl.No. 2 and 3 of this work schedule in phase-2 plants. Safe custody of MS items, loading/un-loading, transportation etc. is in contractor’s scope. The fabricated cable rack supports shall be welded to the structures/ insert plates at various levels of the buildings. The contractor shall provide sufficient anchor bolt of size not less than 12 X 100 mm at an interval of 1 meter for fixing the cable tray support if structures/insert plates are not present. The cable tray and support shall be painted with two coats of anti-corrosive epoxy paint (grey colour) over two coats of suitable primer. Anchor bolts, anti-corrosive epoxy paint and primer required for successful completion of the work shall be arranged by the contractor. Fabrication of MS rack: The scope of work includes fabrication of MS rack as per supplied drawing or instrcution of the Engineer-in-charge using items supplied vide Sl.No. 1, 2 and 4 of this work schedule at Acid electrical workshop. Safe custody of MS items, loading/un-loading, transportation etc. is in contractor’s scope. The rack shall be painted with two coats of anti-corrosive epoxy paint (grey colour) over two coats of suitable primer. Anchor bolts, anti-corrosive epoxy paint and primer required for successful completion of the work shall be arranged by the contractor. |
| 7 | LT Cable tying: The scope of work includes, dismantling the existing LT power and control cables of different sizes from old cable rack after removing the clamps and positioning the same on newly fabricated cable tray. The cables shall be laid back, positioned, dressed and tied firmly on to the new racks. The cables shall be tied on each cross member on which the cable lies using 3 mm nylon rope. Necessary material for tying/clamping of the cable shall be brought by the contractor. The length given against this item is the cable rack length not the length of the cable. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender