Power Government Departments Closing in 4 days TDR #56358819

Tender For Supply, Installation, Testing And Commissioning Of 10Mtr Highmast With 06Nos Of 200W Led Flood Lights Near Thekkanaryaadjuma Masjid Kabaristhan (Ward-10) In Aryad Grama Panchayat

Issued by Government Departments · Alappuzha, Kerala
Tender Value
3.68 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
9205
Bank guarantee accepted
Document Fee
740
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Supply, Installation, Testing And Commissioning Of 10Mtr Highmast With 06Nos Of 200W Led Flood Lights Near Thekkanaryaadjuma Masjid Kabaristhan (Ward-10) In Aryad Grama Panchayat

BOQ

Name of Work:- SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 10MTR HIGHMAST WITH 06NOS OF 200W LED FLOOD LIGHTS NEAR THEKKANARYAADJUMA MASJID KABARISTHAN (WARD-10) IN ARYAD GRAMA PANCHAYAT
Sl. No. Item Description
1CIVIL WORK
22.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
34.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
45.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
55.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
65.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
72.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
8ELECTRICAL WORK
990.15.2.2:Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 10 Meters
1090.15.4.11:Supply Conveyance, installation, testing and commissioning of 200W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
1190.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm
12OD227217/2025-2026:Supply of Syntex Make Panel suitable to install Meter for electricity supply andother accessories made out of Sheet Moulding Compound (560 x 280x 150 mmsize/ nearest size) Surface mounted or recess-in wall (Indoor/Outdoor Use) One piece mouldedSMC base and SMC door with internal hinges. Knockout for wire entry, earthingbolt. Includes Contactor, MCB , Connector, Digital Timer, RCCB, HRC Fuse Basewith HRC Fuse link, 2 Way neutral links, Earth Wire, Banana Al. socket, 2.5 sq.mm ISI marked, FRLS PVC insulated, single core copper conductor cable
13OD227218/2025-2026:Supply and fixing of Surge protector device of IP 20,Mounting type: Screw,Voltage protection level(UP),Nominal voltage: 230V ,UOC:10KV,L-N:7 KV,L-PE:7 KV,N-PE:7 KV,Nominal discharge current (8/20):10 KA,Total discharge current (8/20):60 KA, Response time :<35 ns, Ta: -10-55.
1490.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
155.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
16OD227220/2025-2026:Supplying and laying 25 mm X 3 mm G.I strip at 0.50 metre below groundincluding connection/ terminating with G.I. nut, bolt, spring, washer etc. asrequired.
1790.12.1.3:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 10 sq mm
1890.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size
1990.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
20OD227221/2025-2026:Fabrication and fixing of Stand for meter box/panel board with 2 legs made up of B class GI pipe 32mm dia 1.8mtr.length. 32 mm dia G.I pipe ( medium class)
219.1.2:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)
22OD227219/2025-2026:Supply and fixing of granite plaque and ACP sheet engraved Name of MP and year of project Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56358819
AUTHORITY Government Departments
TENDER VALUE 3.68 Lakhs
LAST DATE 15-07-2026
Authority
Authority Name Kerala Electrical And Allied Engineering Co Limited
Work Description Tender for Supply, Installation, Testing And Commissioning Of 10Mtr Highmast With 06Nos Of 200W Led Flood Lights Near Thekkanaryaadjuma Masjid Kabaristhan (Ward-10) In Aryad Grama Panchayat
Basic Detail
Tender No KEL/FL/MMD/K55/EPROC/26-27
Bidding Type Tender
Location
City Alappuzha
State Kerala
Key Dates
Publish Date 08 Jul 2026
Submission Date 15 Jul 2026
Open Date 16 Jul 2026
Finance
Tender Value 3.68 Lakhs
Tender Fee 740
EMD 9205
Exemption Available
Document List
b9e0edc9-1ac3-47ba-aecc-a870707343fb.html
BOQ_1453685.xls
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Jul 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

b9e0edc9-1ac3-47ba-aecc-a870707343fb.html

xls

BOQ_1453685.xls

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders