Tender For Construction Work Of Annapurna Bhawan In Gram Panchayat Banni
Tender Value
7.01 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
1 days left
EMD
35000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sant Kabeer Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Annapurna Bhawan In Gram Panchayat Banni
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of foundation in ordinary solven 1.5 mts and lead upto 30 mt. As si no.251 |
| 2 | P.cement concrete in 1:5:10 with cement , fine sand & 40 mm gauge b/ballast as /si no.274 |
| 3 | Class 150sub class A brick work in 1:6 cement coarse sand mortor in foundation & plinth as/si no 303 |
| 4 | R.C.C with cem.C.sand& 20mm S/grit in1:2:4 lintels of door, window,bed plate etc as/si no 283 |
| 5 | Mid steel & iron work in R.C.C.or RB. including bending & binding of steel as/si no.504 |
| 6 | CI.150 s.cl. A B/W in 1:4 cement & coarse sand mortor for one brick th. wall in s/ structure, as/ Si nos. 310+305B |
| 7 | Earth work in filling or in cutting in ordinary soll Cartage of earth from 2.0 km asper Si nos 253 |
| 8 | 40 mm th.P cement concrete floors with 1:2:4 cement, c.sand &20 mm S/grit as/si no. 601 A |
| 9 | Plaster work in 1:4 with Cement , Fine sand mortor as Si No 584 |
| 10 | Apply one coat of white cement on new surface I/C rubbing with sand paper as NBO-18.52 |
| 11 | Apply TWO coat of Water proof cement paint on new surface I/C rubbing with sand paper as per 660 |
| 12 | Apply paint on new iron/window and wood work with one coat primer and one coat superior quality emulsion paint as per 641 |
| 13 | Supply & Fixing of rolling shutter of approved design made of 80 x 125 mm (3 \\" x 18 \\" gauge)cold rolled MS , 27.7 cm long wire spring grade no 2 and 18 gauge top cover in complete all PWD SOR Item No. 520 |
| 14 | Fabrication & S/F of MS Grill with square , round & angle I/C welding , drilling & binding |
| 15 | Laying of B. O. E. Soling as Si no 762b |
| 16 | Providing & laying Glass strip 3.00 mmthick and 25mm depth as per PWD SI Nos 631a |
| 17 | Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. 148A |
| 18 | 25 mm dia 2 mm thick PVC 149A |
| 19 | but 32 mm dia. PVC conduit.150A |
| 20 | Supply and fixing of 2/3/4 ways round PVC junction box confirming to ISS for 20mm dia PVC conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover, screwed as directed at site by the Engineer I/C with supply of all the material, labour and T&P required for proper completion of work.154 A |
| 21 | 25 mm dia 2 mm thick PVC 155A |
| 22 | Supply and fixing of switch box 100 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.159 |
| 23 | Same as in item No 159 but of 150 x 150 x 65 mm size 160 |
| 24 | Wiring point for light in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed PVC conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer IN CHARGE 174C |
| 25 | for ceiling fan.177C |
| 26 | for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq.mm. FRLSH PVC insulated multi strandcopper conductor cable 178C |
| 27 | Add for light / fan points with modular type switch in place of piano type switch. 187A |
| 28 | Add for plug point with modular switch & socket in place of piano type switch & socket.187C |
| 29 | Supply and wiring of 4 number 4 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in32 mm dia heavy duty (2 mm thick) PVC conduit concealed in wall,with two number 14 SWG copper earth continuity wire including matching colourwash etc, complete in all respect.271C |
| 30 | S&F of 16 Amp. 240 V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect. 301 |
| 31 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A 1002 |
| 32 | Erection and testing of ceiling fan and regulator for room height upto 5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.1117 |
| 33 | Making hole in the wall for exhaust fan and finishing properly complete in all respecT 1121 |
| 34 | Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.1122 |
| 35 | Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each 1123 |
| 36 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm diaPVC conduit concealed in wall, with one number 14 SWG copper earth continuity wire etc., complete in all respects including matching colour wash etc. complete in all respect. 1304 C |
| 37 | Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect.CAT AAA 1417A |
| 38 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. 1413 CAT AAA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender