Tender For Renovation And Repair Of Mini Godown Building Located At Bazar Ward Langate.
Tender Value
12.78 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
0 days left
EMD
25560
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Repair Of Mini Godown Building Located At Bazar Ward Langate.
BOQ
| Sl. No. | Item Description |
| 1 | Mulba Clearance of Godown floor and truss above manually (Complete job) as per directions of site engineer |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres2.9.1 All kinds of soil. |
| 3 | Providing and laying of soling stone size over 150mm on level (hand packed) watering ramming complete under raft and flooring.. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.7. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, Raft Short, Column, Plinth Beam upto Plinth levelincluding curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)complete job. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for:5.9.16 Edges of slabs and breaks in floors and walls5.16.1.1 Under 20 cm wide |
| 7 | 5.9.3 Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints .11.54.2. Size of tile 600x600 mm |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.8.31 |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):9.1.6 Second class kail wood |
| 12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling , all complete as per direction of Engineer-in-charge. including-Butt hinges and necessary screws .9.6.5 second class kail wood 30mm |
| 13 | Providing and fixing of 6mm thick HDHMR one side laminated board in ceiling including frame work of budloo wood of joists of size 3\\"x5\\"@3'-0\\" c/c both ways and size 2\\"x2\\" complete job all accessories like nails, fasteners, screws complete job as per directions of site engineer. |
| 14 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately22.1.2.2 Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 15 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 16 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.)22.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 17 | With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 18 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.2 2 mm thick |
| 19 | Finishing walls with premium Acrylic smooth exterior paint with silicon additives of required shade: 13.120.1 Old work (Two or more coats applied @ 1.43 liters/ 10 sqm) over existing cement paint surface. |
| 20 | 13.57.2 Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 21 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.2 Welded |
| 22 | Providing Coloured corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.6 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 23 | Providing ridges/valleys or hips of width 60 cm (overall width) plain G.S. sheets fixed with polymer-coated J or L hooks, bolts and nuts of 8 mm diameter, G.I. limpet and bitumen washers, complete (0.50 mm thick with zinc coating not less than 275 g/m²).12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 24 | Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement 4 fine sand) complete |
| 25 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : 15.13.1 Of area of 3 sqm. and below |
| 26 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 27 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) interior walls. 13.1.2 1 : 6 ( 1 cement : 6 fine sand) |
| 28 | Dry random rubble masonry with hard stone in foundation and plinth:7.3.1 With bond stone.Quarry |
| 29 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 19.38 |
| 30 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. |
| 31 | 19.2.2.3 PN-16 pipe , 25mm OD(SDR-7.4) |
| 32 | 19.2.2.4 PN-16 pipe , 32mm OD(SDR-7.4) |
| 33 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. approved brand like Hindware,Cera,Hindusten or equavallent18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 34 | 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 35 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and moulding etc. all complete as specified and as directed by the Engineer-in-Charge. 11.68.1 |
| 36 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) foundation concrete 1:4:8 mix (1 cement : 4 coarsesand : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement a complete as perstandard design :Inside size 450x450x450 mm deep including C.I. cover with frame (light duty) as per directions of site engineer |
| 37 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 38 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 39 | 19.56 Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 40 | Applying snowcem of approved brand and in exterior walls of incl. all carriages complete job |
| 41 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 18.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 42 | 9.77 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 43 | providing and fixing of C.P Nipple of approved quality |
| 44 | providing and fixing of gate valve 200mm nominal of approved quality |
| 45 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 46 | Making the opening for door/window/clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground.14.4 |
| 47 | Dismantling of wooden ceiling including mats, bamboo, jaffari etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.15.32 |
| 48 | Providing and Fixing of Geyser of 25 litre size of approved brand (Havells, Venus, Jaguar) with all accessories. |
| 49 | Providing and fixing PVC pipes of approved make ( B grade pipe of prince make or phnolex made) incl clamping etc all complete. |
| 50 | 100mm dia |
| 51 | 75mm dia |
| 52 | P-Trap 100mm |
| 53 | plain bend 100mm |
| 54 | plain bend 75mm |
| 55 | Door junction 100xx100x100 mm |
| 56 | Door junction 75x75x75mm |
| 57 | Floor trap 75mm |
| 58 | PVC Collar 100 mm |
| 59 | PVC Collar 75 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender