Tender For Cnb Jaitkheda Kannad Dist.Chhatrapati Sambhajinagar
Tender Value
11.79 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
7 days left
EMD
11796
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Cnb Jaitkheda Kannad Dist.Chhatrapati Sambhajinagar
BOQ
| Sl. No. | Item Description |
| 1 | Item no.1: Excavation in all kinds of soil including boulders upto 0.60 m diameter (0.113 cum) for canal, seating of embankment, filter drains/catch water drains etc and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials machinery, labour, dressing bed and sides to required level and profile etc. with for 15 m. lead and 6 m. lift |
| 2 | Item no.2: Excavation in hard murum including boulders upto 0.60 m. diameter (0.113 cum.) for canal embankment, filter drains/catch water drains etc seating of and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery labour. dressing bed and sides to required level and profile etc with km lead and 6 m. lift. 15m15 m. lead and 6 m. lift |
| 3 | Item no.3: Excavation in soft rock without blasting including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/catch water drains etc placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery and labour, dressing bed and sides to required level and profile etc with km. lead and15 m. lead and 6 m. lift |
| 4 | Item no.4: Excavation in hard rock of all toughness by blasting including boulders above 0.60 m. diameter (0.113 cum) minimising damage to sides slope of excavation in water prism area by adopting any one or combination of line drilling / pre-spliting/smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all machinery, labour, levelling bed etc. with lead upto 15 m and lift 6 m. |
| 5 | Item no.5: Providing laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed. |
| 6 | Item no.6: Providing and fixing including Cutting, bending hooking, laying in position and tying M S/HYSD/TMT bars for reinforcement of R. C. C. works as per detailed drawing etc completed |
| 7 | Item no.7: Providing and laying in situ cement concrete of grade M. 150 (40 MSA) of trap/granite gneiss /quartzite graded metal for PCC with or without surface reainforcement/RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structurs intake structurs, training walls, piers, abutment etc with concrete mixer with shuttering and scaffolding curing etc. completed with an initial lead 50 m and lift 1.50 m. |
| 8 | Item no.8: Back filling upto ground level behind the ground level behind the canal structures etc completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structeur etc completed |
| 9 | Item no.9: Providing casing embankment using selected impervious material available directly from excavation in layers including cost of materials machinery, labour, all other operations such as collection of material, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/sides, watering compacting each layer to density control of not less then 95 percent or as stipulated using vibratory compactor etc, completed with lead upto 1 km for watering and 6m lift |
| 10 | Item no.10: Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved sources including cost of all material, labour, hand packing /wedging stone chips finishing etc.completed with lead upto 50 m and lifts as directed. |
| 11 | Item no.11: Providing and and fixing canal information bord of 1.2 x 0.75 m prepared on 16 gauge M. S. Sheet with angle iron frame of size 35 x35x3 mm with cross bracing of size 25 x 25 x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameld bonded with red retro reflective sheets Engineering grade, border/letters/numeral/arrows coated non peal able crystal clear protective transparant coat retaining 100% reflection including two angle ron post of size 50x50x 5 mm of 3.65 m long inflated at bottom drilled on top and painted with black bonds of 30 cm with four numbers high strength of G. I bolts and nuts of size 10 mm dia. 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing, in ground with cement concrete in M-15 block of size 60 x60x 75 cm as directed by Engineer-in- |
| 12 | Insurance |
| 13 | Royalty |
| 14 | GST Tender Amount Rs.1464807/- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender