Tender For Addition Alteration To Bldg No T-57 (Fresh Shed) In ‘C Zone At 50 Coy Asc (Sup) In Rms
Tender Value
43 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
19 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Bldg No T-57 (Fresh Shed) In ‘C Zone At 50 Coy Asc (Sup) In Rms
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. |
| 2 | Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 3 | Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 4 | Dismantling floor, hearth , wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 5 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 6 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed. |
| 7 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 8 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 9 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 10 | M&L for mild steel TMT bars 5mm dia and over and including 10mm dia in stirrups spacers and binders,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 11 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 12 | M&L of Sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed. |
| 13 | M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed. |
| 14 | M&L for 100mm thick PCC (1:4:8) type C-2(using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 15 | M&L for light shade Vitrified Ceramic tiles , (8-9) mm thick (square/ rectangular) polished,area of each tiles exc 0.42sqm but not exceeding 1.00 sqm, laid in floors over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 16 | M&L for light shade Vitrified Ceramic tiles , (8-9) mm thick (square/ rectangular) polished,area of each tiles exc 0.42sqm but not exceeding 1.00 sqm, on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick baking coat in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 17 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone floor/steps treads including rubbing/grinding and polishing complete all as specified and as directed. |
| 18 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 10mm thick baking coat in CM (1:4) on vertical surfaces laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing and polishing complete all as specified and as directed. |
| 19 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed. Please Enable Macros to View BoQ information |
| 20 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender