Tender For Welcome Maintenance Of Offr Md Accn In Aor Of Age B/R-I Under Ge(West)Pathankot
Tender Value
35 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Of Offr Md Accn In Aor Of Age B/R-I Under Ge(West)Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I B/R work:-Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain etc complete all as specified and directed. |
| 2 | M&L for burnt clay brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 3 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick in CM 1:6 mixed on other than fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for 10 mm thick rendering on brick work or concrete surfaces in CM 1:3 as in ceiling of roof slab ,fin, facia, culvert, chajjas, parapet and similar article etc finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces of wall and applying two coats of Cement Base Paint over and including one coat of alkali resistant priming paint complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces of wall and applying minimum 1.5 mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion over and including one coat of primer complete all as specified and directed. |
| 10 | M&L for preparation of old plastered or unplastered ,old decorated surfaces of wall surface and applying two coat of distemper oil emulsion complete all as specifie complete all as specified and directed. |
| 11 | M&L for Preparation of old plastered or unplastered or old decorated wall surface and applying minimum 02mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion over one coat primer complete all as specified. |
| 12 | M&L for complete removal of existing treatment on old plastered or unplastered or old decorated wall surface (Interior / Exterior Walls) and applying minimum 02mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying one coat of acrylic primer as per manufacturer’s instructions and applying two coat of Acrylic Emulsion paint of premium quality 100% Acrylic complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment on old plastered or unplastered or old decorated ceiling surface and applying two coats of white wash complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment on old plastered or unplastered or old decorated wall surface and applying two coats of white wash complete all as specified and directed. |
| 15 | M&L for preparation of old plastered or unplastered ,old decorated surfaces of wall surface and applying one coat of Cement Base Paint complete all as specified and directed. |
| 16 | M&L for preparation of old plastered, unplastered ,old decorated ,heritage ,Texture finished surface of wall surface and applying one coats of weather proof exterior emulsion Paint complete all as specified |
| 17 | M&L for liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) |
| 18 | M&L for 10mm thick plaster, concrete surfaces and provn of on roof finished even and smooth using liquid water proofing compound as per manufacturers instructions Complete all as specified and directed. Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified Note : Demolition should be done by chiselling. all as specified and directed |
| 19 | M&L for demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 20 | M&L for 100mm thick plain Cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. |
| 21 | M&L for 75mm thick plain Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, apron, path and paving finished even and fair complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 23 | M&L for joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 24 | All as per srl item No 23.00 here-in-before but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and directed. |
| 25 | M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc (size of each tile 0.6m x 0.6m), set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 26 | M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc (size of each tile 0.6m x 0.6m), set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 27 | M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles in floors etc (size of each tile.600x1200mm ), set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 28 | All as per srl item No 28.00 above but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and directed. |
| 29 | M&L for Glazed ceramic Coloured tiles in vertical/dado surface 450mmx300mmx7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and directed. |
| 30 | M&L for 18-20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete including dismantling of old unserviceable stone all as specified and directed. |
| 31 | M&L for Non abrasive paving/ parking tiles cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15 mm thick screed bed in cement mortar 1:4 including dismantling of old unserviceable tile complete all as specified and directed. |
| 32 | S&F Cement concrete tiles 25cm x 25cm x22mm thick, with grey cement & pigment machine pressed; set, jointed & pointed in neat cement slurry in floors ,path & cut , polished over and including , 20mm thick secreed bed or bedding in CM 1:6 including dismantling of old unserviceable tile complete all as secified and as directed. |
| 33 | Demolition of RCC of any description slab , shelves , chajjas, water tank ,chullah hoods etc and in any position including cutting reinforced as required complete all as specified and directed. |
| 34 | M&L for RCC type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 35 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished surfaces of concrete complete all as specified and directed. |
| 36 | M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed. |
| 37 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings or PVC sheet in roof including ridges, sunshades or any position etc complete all as specified and directed. |
| 38 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sunshades ,roof covering, cladding to wall etc fixed with self tapping screws complete all as specified and directed. |
| 39 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and as in ridge etc fixed with self-tapping screws complete all as specified and directed. |
| 40 | Dismantling timber scantlings 40sqcm and over in section, in any position as in wooden trusses in framed work of any description complete all as specified and directed. |
| 41 | S&F rolled hollow section as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; and supports to roof covering, sun-shades,vertical poles etc fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified complete all as specified and directed. |
| 42 | M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed complete all as specified and directed. |
| 43 | Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed. |
| 44 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed. |
| 45 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each. |
| 46 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening. |
| 47 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 48 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 49 | S&F factory made Pressed steel frame of size 125x60x1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete and back filling of hollow portion of frame including fixing of hold fast with plain cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate complete all as spd and directed |
| 50 | S&F factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 51 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 52 | All as per srl item No. 51 but wire gauzed ie.panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.The rate included for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. |
| 53 | S&F 35 mm thick, 2nd class hard wood factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 54 | S&F Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 55 | S&F Factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, 2nd class HW rail and style complete all as specified and directed. |
| 56 | M&L for preparation of newly wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | M&L for preparation of Old wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 58 | S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed |
| 59 | S&F butt hinges medium weight 100 mm cold rolled mild steel complete all as specified. |
| 60 | S&F 250mm long Aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed complete all as specified and directed. |
| 61 | S&F 200mm long aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 62 | S&F 150mm long Extruded aluminum alloy handles, fabricated type, anodised complete all as specified . |
| 63 | S&F in repair 140mm long Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified . |
| 64 | M&L for 18/19mm thick Pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood lipping fixed with screws to steel/timber frame work as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc including taking down old shutters & shelf etc complete all as specified |
| 65 | M&L 18mm thick Pre-laminated Medium density fibre board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood lipping fixed with screws to steel/timber frame work as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc including taking down old shutters & shelf etc complete all as specified and directed. |
| 66 | Supply, fabricate and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf Kitchen cabinet, cupboard, partition & almirahs complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under :- (a) Stainless steel Handle fancy type 100mm size.(b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation. (j) Magnet of suitable size fixed for cabin leafs, drawers Make-Syntex Plasto board and equivalent approved by Engr in charge. Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by Engr In Charge. |
| 67 | S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps (When open) 30 mm complete all as specified and directed. |
| 68 | S&F 100mm long Hasp & staple, safety type, aluminum anodised with hinge pin including bolt to hinge plate with screws complete all as specified and directed. |
| 69 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 70 | S&F Self-closing hinges, heavy weight, cold rolled mild steel, and fixed hinges medium weight 100 -150 mm cold rolled mild steel in repair complete all as specified. |
| 71 | S&F providing and fixing stainless steel (Grade 304) stainless steel hinges, handles, Stainless steel baskets, stainless steel rollers, Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation , Stainless steel perforated cutlery basket of suitable for cabinet,drawers and shelves opening / closing operation. Stainless steel steel Cup and Saucer basket suitable size of cabinet,drawers and shelves opening / closing operation. Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation.Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation stainless steel roller of size 25mm x 12mm, 505mm lenth suitable for baskets stainless steel vent perforated 1mm thick of size 150mm x 100mm Make-Syntex Plasto board and equivalent approved by Engr in charge. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts hing roller ext. and bolts complete, stainless steel bolts etc., of required size, |
| 72 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 73 | All as per srl item No 72.00 here-in-before but 20mm bore Steel water tubing complete all as specified and directed. |
| 74 | S&F 15mm bore Steel water tubing 'medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 75 | All as per srl item No 74.00 here-in-before but 20mm bore Steel water tubing |
| 76 | S&F 25 mm Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) fixing of over flow pipeline complete all as specified and directed. |
| 77 | S&F 25 mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor fixing of over flow pipeline from overhead tank to ground level including taking up or down 25 mm bore, steel tubing complete all as specified and directed. |
| 78 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 79 | S&F in repair Door seal powder coated aluminum brush type polypropylene screwed down to shutters complete all as specified and directed. |
| 80 | S&F in repair Door cill powder coated aluminum Rubber type screwed down to shutters complete all as specified and directed. |
| 81 | S&F in repair 25mm outer dia stainless steel bright finished ,fancy type decorative drapery rod of thickness 20 gauge with ends caps in (pair) fixed to wall with screws ,PVC gully including all necessary fixing arrangement including taking down old curtain rod complete all as specified and directed. |
| 82 | S&F in repairs heavy duty stainless steel bright finished ,fancy type decorative brackets fixed with PVC plug/gutty & screws etc complete all as specified and directed. |
| 83 | Demolition and breaking up drain pipes (PVC,Salt glazed ware, AC or Reinforced concrete) set in cement mortar,internal dia of pipe in 75/110mm including earth work complete all as specified and directed. |
| 84 | S&F for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as spd and directed. |
| 85 | S&F for PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as spd and directed. |
| 86 | Taking down eaves gutter and rain water pipe any size any pattern ,PVC/ AC pipe including all fittings ,Internal dia of pipe in 75/110mm complete all as specified . |
| 87 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 88 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 89 | S&F PVC (SWR) bends ISI marked any radius 75mm dia complete all as spd and directed. |
| 90 | S&F PVC (SWR) bends ISI marked any radius 110mm dia complete all as spd and directed. |
| 91 | Disconnecting existing tanks (PVC/RCC) of capacity exc 250 & not exc 500 liters, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position & Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 92 | S&F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old PVC/RCC water tanks complete all as specified and directed. |
| 93 | All as per srl item No 92.00 above but water storage tanks of 1000 ltrs capacity complete all as specified and directed. |
| 94 | S&F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic bal screwed for iron pipe & fixed (min. weight 20mm-210 gms) complete all as specified and directed. |
| 95 | S&F in repair for double bowl sink with Y shaped waste pipe , coupling made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe complete all as specified and directed by Engr-in-charge. |
| 96 | S&F in repair Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with screw of required size including necessary fittings/nuts, bolts & washers complete all as specified and directed. |
| 97 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete, including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 98 | S&F in repair One Piece EWC S Concealed with Soft Close Seat Cover and Twin Flush Fittings 300 mm (710 L x 370 W x 770 H) mm Type One Piece Toilet S-Trap, Colour Snow White, Finish Gloss Finish Material Ceramic complete all as specified and directed. |
| 99 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 100 | S&F in repair Plastic water closet seat cover, any colour, closed pattern with recessed bottom, & cover & mild steel CP or aluminized hinging device complete all as specified and directed. |
| 101 | S&F in repair Vitreous China wash basin, white or in matching colour of tiles, flat back, size 630x450mm including brackets, CP brass waste fitting 32 mm dia,PVC waste pipe 750 mm long( Minimum) cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 102 | S&F in repair 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 103 | S&F in repair 15mm dia PVC connections 600mm long with PTMT nuts complete all as specified and directed. |
| 104 | S&F in repair 125mm dia chromium plated perforated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed. |
| 105 | S&F in repair Bathroom cabinet Mirror of size 450mmX350mm wall Mounted, Shape Rectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 106 | S&F in repair 600mmx450mm beveled edge mirror of selected quality glass not less than 5.5 mm thick with edges rounded or beveled , mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 107 | S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 108 | S&F in repair Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. |
| 109 | S&F in repair CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. |
| 110 | S&F in repair 15mm bore dia fancy type, chromium plated angular valves /stop valves, cast copper alloy, screwed down, high pressure ,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed. |
| 111 | S&F in repair 15 mm bore chromium plated fancy type long body CP Bib taps with crutch or above butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (minimum weight 575 grams) complete all as specified and directed. |
| 112 | S&F in repair 15mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type),cast copper alloy, screwed down, high pressure, with crutch or above butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed. |
| 113 | S&F in repair 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for basin, sink, bath complete all as specified and directed. |
| 114 | S&F in repair 15mm bore brass chromium plated Wall Mixer 3-in-1 System with Provision for over head shower with 115 mm long bend pipe ,Connecting Legs Wall Flange (without Hand and Overhead Shower) complete all as specified and directed. |
| 115 | S&F in repair Hand Shower dia 105 mm round shape single flow with air effect (ABS BODY & FACE PLATE CHROME PLATED) with rubit cleaning system including shower flexible tubes 8 mm dia & 1.5 m long with nuts with wall bracket complete all as specified and directed. |
| 116 | S&F in repair for CP over head Shower 190mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system with 190mm Long Flat Shape shower arm chrome plated Casted with Flange complete all as specified. |
| 117 | S&F in repair Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. |
| 118 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 119 | S&F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 120 | S&F in repair PVC corner shelf of 3 or 4 shelfs with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 121 | S&F in repair chrome finish Toilet paper Roll Holder with fixing arrangement complete all as specified and as directed. |
| 122 | S&F in repair Stainless Steel Soap Dish or Soap Holder Dish for Bathroom with fixing arrangement complete all as specified and as directed. |
| 123 | S&F in repair for peg set of 05 Pin Stainless Steel Grade AISI 304, fancy type, superior quality and fixed with screws complete all as specified . |
| 124 | S&F in repair for 75mm PVC floor trap, ISI marked with perforated grating incl jointing to waste pipe fixed with solvent cement complete all as specified. |
| 125 | Repairs to any type of wooden joinery works such as door, window, Ventilator, wardrobes, cupboard, kitchen cabinet of any description by taking down & re-fixing in the same opening including Re-securing, easening / plaining, adjusting ,re-fixing builders hardware, renewal of screws, welding (if required) etc making smooth functioning etc complete all as specified and directed. |
| 126 | S&F in repair fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (minimum weight 665 grams) complete all as specified and directed. |
| 127 | S&F in repair Bib tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms) complete all as specified and directed. |
| 128 | S&F in repair PVC tank lid/cover for water storage tank capacity of 250 to 2000 ltrs with fixing arrangement complete all as specified and directed. |
| 129 | S&F in repair 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm complete all as specified and directed. |
| 130 | S&F in repair Y shaped PVC waste pipe flexible type including all cups and sockets with minimum length 800mm complete all as specified and directed. |
| 131 | S&F in repair gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed. |
| 132 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut,bolts, fixed with wooden/MS beads & screws etc complete all as specified and directed. |
| 133 | M&L for 03 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and directed. |
| 134 | M&L for 04mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old broken glass from wooden/steel frames complete all as specified . |
| 135 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed |
| 136 | M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) complete all as specified and directed. |
| 137 | Taking down old any type description of Heritage ,Texture finished surface including preparation of surface and M&L for applying heritage/Texture finish surface such as fine flakes features/heritage flakes textures features/heritage granite finish/ heritage granules finish/ heritage surface textures/metallic/stone finishes/natural finishes/super matt paint finish/fine flakes /fine granules etc complete application process as per manufacturer’s recommendations in any tint design & pattern as approved by GE including bonding agent & top coat including trowelled on the surface on internal or external surfaces including matching with existing work including necessary scaffolding any height height as required at site complete all as specified and as directed. Make :-(a) Unitile (b) Bakelite Hylam (Heritage). (c) Dulux (acratex)(d) Apex (Duracast). Note: All painted areas site to be cleaned and hand over as earlier without any extra cost to Govt |
| 138 | S&F second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sqcm and not exc 25 Sqcm including taking down old fillets complete all as specified and directed. |
| 139 | S&F in repair modern furnished Vainity type Vitreous China wash basin, table top or table fix of any size, flat back, with granite, marble or Laminated ply ( Sanmika) top finished of any colour,pattern or texture with cabinet type boxes or soft sliding drawers as per recomnded by Engr-In -chrge, includinge Angle Valve , PVC connectiopns, brackets, CP brass waste fitting 32 mm dia,PVC waste pipe 750 mm long( Minimum) cutting for and pinning in ends of brackets or erecting stand complete all as specified. |
| 140 | S&F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminum frame for partition / doors / windows / ventilators /sliding shutters etc with one or more rebates including joining cleat for fixing etc including taking down old frames with shutters complete all as specified |
| 141 | S&F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,aluminum snap beading, screws etc complete all as specified |
| 142 | S&F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, rolling/sliding type, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,aluminium snap beading, screws etc,suitable handle (1 no.),rolling wheal etc complete all as specified |
| 143 | S&F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 nos) ,suitable handle (1no) complete all as specified |
| 144 | S&F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) designer grill (weight of grill shall not less than 2.00 KG/Sqm) of 07mm dia and aperture of 75mmx75mm fixed with and including aluminum flat section of size 50mm x 1.5 mm fixed to aluminium windows/ ventilators Complete all as specified and as directed. |
| 145 | S&F 5.5mm thick selected quality tinted sheet glass including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc in aluminum partition / doors / windows / ventilators etc complete all as specified and directed. |
| 146 | Taking down and refixing after repair Steel rolling shutters 1.25 mm thick with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete, gear operated type with bevel gear box and crank handle or manually operated any type of rolling Shutter complete all as spd. |
| 147 | S&F in repair Brass 4 levers Mortice lock, vertical type, size 100mm |
| 148 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed ncluding taking down shutter & refixing complete all as directed. |
| 149 | Repairs to any type of wooden& Pvc joinery works such as door, window, Ventilator, wardrobes, cupboard, kitchen cabinet of any description by taking down & re-fixing in the same opening including Re-securing, easening / plaining, adjusting ,re-fixing builders hardware, renewal of screws, welding (if required) etc making smooth functioning etc complete all as specified. |
| 150 | S&F in repair soft closing hydraulic hings ( Daddu hinges) complete with all accessories with screw all as specified and directed |
| 151 | S&F in repair coloured vertical /Horizontal venetian blinds roll on type having minimum 75 width of strip complete with machine and all accessories fix to wall with screw all as specified and directed Sample Approved By Engr-In-Chge. |
| 152 | S&F in Repair Non-adhesive wallpaper , Digitally printed on superior quality, smooth/ matt/glazed print wallpaper.Weight: more than 150 gsm non-woven paper. Fully FR rated for domestic and commercial applications including adhesive paste,gum and other necessory asscessories pasted by experts Complete all as spd and directed by engr-in-chge. |
| 153 | S&F in Repair PVC Luvours Wooden /Plain/Art/Textured including lighting in groovs if required directed by eng in chge Digitally printed on superior quality, smooth/ matt. Fully FR rated for domestic and commercial applications including pasting strips,Jointed Strips and adhesive paste,gum and other necessory asscessories pasted by experts Complete all as spd and directed by engr-in-chge. |
| 154 | S&F in repair Bathroom Mirror of size Exc 1 Sqm not exc 2.5 Sqm wall Mounted Bevelled Edge Fixed With Plug, Spacers, Shape Rectangularcomplete all as specified and directed. |
| 155 | S&F in repair 8 mm Toughned glass as in hinged doors, partitions utomatic doors and similar work including cutting to shape, drilling holes required. |
| 156 | S&F self closing taps 15 mm bore and 203.2 mm hight for wash basin copper alloy chro-mium plated screwed for iro pipe and fixed in repair make - Jaquar |
| 157 | Providing and fixing factory made uPVC white colour casement Openable/Slideable Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including Neceassary channels, railS&Fittings as reqired & drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 158 | S&F factory made uPVC white/ coloured fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,. Including Glass 5.5mm size excand other Accessories all complete as per approved drawing & direction of Engineer-in-Charge |
| 159 | Providing and fixing factory made uPVC white colour openable casement/sliding window/door, three track window and door , fix glass frame , made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement forfixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Including Glazing, hardware hinges and fitting, EPDM rubber gasket etc. and others Necessary Accessrories.) |
| 160 | Sch 'A' Part-I E/M Work:-M&L for modular point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC rigid concealed conduit heavy duty suitable size with all accessories including modular matallic flush box of suitable way with modular cover plate for modular switches and sockets , including green 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface including taking down of old existing wiring any type and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green).complete all as specified and directed. |
| 161 | All as per Srl item No. 160 here-in-before but modular call bell point complete all as specified and directed. |
| 162 | All as per Srl item No. 160 here-in-before but modular 3 pin 5 Amps socket outlet on the same board with other switch complete all as specified and directed. |
| 163 | All as per Srl item No. 160 here-in-before but modular 3 pin 5 Amps socket outlet on the independent board with other switch complete all as specified and directed. |
| 164 | All as per Srl item No. 160 here-in-before but modular 15/16 Amps socket outlet on the independent board with 2.5 Sqmm copper conductor FRLS cable and 2.5 Sqmm PVC insulated unsheathed copper conductor cable FRLS (green colour) as earth lead complete all as specified and directed. |
| 165 | M&L for modular point wiring with 4 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC rigid concealed conduit heavy duty suitable size with all accessories including modular matallic flush box of suitable way with modular cover plate for modular switches and sockets , including green 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface including taking down of old existing wiring any type and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green). complete all as specified and directed. |
| 166 | S&F in replacement switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed. |
| 167 | S&F in replacement switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. |
| 168 | S&F in replacement socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed. |
| 169 | S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. |
| 170 | S&F in replacement switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge. |
| 171 | S&F in replacement ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed. |
| 172 | S&F in replacement Hylum sheet 4x4 to 4x6 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by Engr-in-charge |
| 173 | S&F in replacement Hylum sheet 6x10 to 8x10 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by Engr-in-charge |
| 174 | S&F in replacement sunken box of 4x4 to 4x6 inches for fixing of hylum sheet including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and as directed by Engg-in-charge. |
| 175 | S&F in replacement sunken box of 6x10 to 8x10 inches for fixing of hylum sheet including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and as directed by Engg-in-charge. |
| 176 | S&F in replacement 1100 volte grade heavy duty cable PVC insulated aluminium conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connection one twin core flat cable or circular 10Sqmm including PVC conduite of suitable size complete all as specified and as directed by Engg-in-charge. |
| 177 | S&F in replacement 20mm Rigid non-metallic PVC conduit heavy duty exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. |
| 178 | S&F in replacement modular switch 1 way 6 A, 1module comlete all as directed. |
| 179 | S&F in replacement modular switch 1 way 16 A, 1module comlete all as directed. |
| 180 | S&F in replacement modular socket 6A/16A, 2/3 pin combind, 2module comlete all as directed. |
| 181 | S&F in replacement modular socket 6A, 3 pin combind, 2module comlete all as directed. |
| 182 | S&F in replacement modular bell push 6 A, 1module comlete all as directed. |
| 183 | S&F in replacement modular fan regulator 6 A, 1module comlete all as directed. |
| 184 | S&F in replacement modular metal flush box, 2module comlete all as directed. |
| 185 | S&F in replacement modular metal flush box, 3module comlete all as directed. |
| 186 | S&F in replacement modular metal flush box, 4module comlete all as directed. |
| 187 | S&F in replacement modular metal flush box, 6module comlete all as directed. |
| 188 | S&F in replacement modular metal flush box, 8module comlete all as directed. |
| 189 | S&F in replacement modular metal flush box, 12module comlete all as directed. |
| 190 | S&F in replacement modular metal flush box, 16module comlete all as directed. |
| 191 | S&F in replacement modular white cover plate with frame, 2module comlete all as directed. |
| 192 | S&F in replacement modular white cover plate with frame, 3module comlete all as directed. |
| 193 | S&F in replacement modular white cover plate with frame, 4module comlete all as directed. |
| 194 | S&F in replacement modular white cover plate with frame, 6module comlete all as directed. |
| 195 | S&F in replacement modular white cover plate with frame, 8module comlete all as directed. |
| 196 | S&F in replacement modular white cover plate with frame, 12module comlete all as directed. |
| 197 | S&F in replacement modular white cover plate with frame, 16module comlete all as directed. |
| 198 | S&F in replacement lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed. |
| 199 | S&F in replacement of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge. |
| 200 | S&F in replacement ceiling rose 65 x 50mm three terminals complete all as specified and directed. |
| 201 | S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed. |
| 202 | S&F in replacement CFLs with LED Lamp, B22 type ,12 watt,complete all as specified and directed. |
| 203 | S&F in replacement energy saving decorative LED 20W box type (4 Feet), frame , light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired without tube and making connections with 3 core twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge. |
| 204 | S&F in replacement LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge. |
| 205 | S&F in replacement LED decorative wall light fixturemade up of polycorbonate, suitable for retro fit LED Lamp alongwith 12W LED lamp complete all as specified and as directed. |
| 206 | S&F in replacement bed lamp 3 watt madeup of polycorbonate body, flexible to move, suitable to fix on wall, including connection complete all as specified |
| 207 | S&F in replacement of 15W LED Post top light with aluminium enclosure, IP 65 energy saving, environment friendly, long life asthetically designed with symmetrical light distribution having clear cover for bright illumination with high power leds including connection with copper wire complete all as specified and directed. |
| 208 | M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fans Single phase, 230 volts 300 mm or 12” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable size from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. |
| 209 | M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. |
| 210 | S&F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed . |
| 211 | S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 212 | S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 213 | M&L in replacement for MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 214 | M&L in replacement for MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 215 | S&F in replacement for MCB SPN 240 volts any rating from 63 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 216 | S&F in replacement sub Main Wiring with PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. |
| 217 | All as per srl item No 216 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead complete all as above but 4.00 Sqmm |
| 218 | S&F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 63 AMPS AC 415 VOLTS 16 KA=01 NO as incoming and 6 nos. MCB SP 40 Amps, C series as outgoing. ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. |
| 219 | S&F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length on less than 0.9 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. |
| 220 | S&F in replacement switch socket combination 2 in 1, 3 pin, 6 and 16 amps flush type 230 volts complete all as specified and as directed by Engg-in-charge. |
| 221 | S&F in replacement switch socket combination 2 in 1, 3 pin, 6 amps flush type 230 volts complete all as specified and as directed by Engg-in-charge. |
| 222 | S&F in replacement Gang Box for 15 Amp Switch socket combined including 15Amp combiation complete all as specified and directed by Engr-in-charge. |
| 223 | S&F in replacement Gang Box for 5 Amp Switch socket combined including 5Amp combiation complete all as specified and directed by Engr-in-charge. |
| 224 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 1,07,299.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender