Tender For Repair/ Maintenance Of Water Supply Pipe Lines, Testing Of Water & Connected Items At Ge (Af) Awantipur
Tender Value
35 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
awantipora → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/ Maintenance Of Water Supply Pipe Lines, Testing Of Water & Connected Items At Ge (Af) Awantipur--Union 20mmUnion 25mmUnion 32mm daUnion 40mmUnion 50mmSocket 15 mmSocket 20 mm diaSocket 25 mm diaSocket 40 mm diaSocket 50 mm diaR Socket 40mmX50mmR Socket 15X20R Socirel 20X25mmElbow 150Elbow 20Elbow 250Elbow 40mElbow 50mNipple 15mm dia rich langMpple 15 mm dia 4 inch longMpple 15 mm dia 6 inch longMpple 20 mm dia 2 inch longMpple 20 mm dia 4 inch longMpple 20 mm dia 6 inch longMipple 25 mm dia 2 inch longMpple 25 mm dia 4 inch long
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repair/rectification of leakage to water supply distribution lines of GI tubing by necessary earth work, PCC work, welding work if required, welding etc for any size of pipe from 20 mm to 150 mm bore pipe all as specified & directed by Engr-in-Charge. |
| 2 | Note : (i) The complaints for the above works shall be registered by contractor at the water supply complaint cell of AGE E/M (ii) Stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) Tools ,Plumber and Transport with driver for attending of above complaints shall be arranged by contractor. (iv) The rate quoted by the contractor for above jobs under item No shall be inclusive of cost of works under note (i) to (iii) above. (v) The above complaints shall be completed within 12 Hrs of the registration of the complaints. If the complaint is not completed within specified time then the penalty of Rs 1500 per complaint is imposed on contractor. (vi) The stores required for the works shall be issued and measured separately under relevant item. (vii) Excavation, returning/ filling shall be measured and paid separately. |
| 3 | Supply only GI fittings, medium grade, ISI marked of following sizes:- |
| 4 | Union 15 mm dia |
| 5 | Union 20mm |
| 6 | Union 25mm |
| 7 | Union 32mm dia |
| 8 | Union 40mm |
| 9 | Union 50mm |
| 10 | Socket 15 mm |
| 11 | Socket 20 mm dia |
| 12 | Socket 25 mm dia |
| 13 | Socket 40 mm dia |
| 14 | Socket 50 mm dia |
| 15 | R Socket 40mmX50mm |
| 16 | R Socket 15mmX20mm |
| 17 | R Socket 20mmX25mm |
| 18 | Elbow 15mm |
| 19 | Elbow 20mm |
| 20 | Elbow 25mm |
| 21 | Elbow 40mm |
| 22 | Elbow 50mm |
| 23 | Nipple 15 mm dia 2inch long |
| 24 | Nipple 15 mm dia 4 inch long |
| 25 | Nipple 15 mm dia 6 inch long |
| 26 | Nipple 20 mm dia 2 inch long |
| 27 | Nipple 20 mm dia 4 inch long |
| 28 | Nipple 20 mm dia 6 inch long |
| 29 | Nipple 25 mm dia 2 inch long |
| 30 | Nipple 25 mm dia 4 inch long |
| 31 | Nipple 25 mm dia 6 inch long |
| 32 | Nipple 40 mm dia 2 inch long |
| 33 | Nipple 40 mm dia 4 inch long |
| 34 | Nipple 50 mm dia 2 inch long |
| 35 | Nipple 50 mm dia 4 inch long |
| 36 | Burning out lead joint in position, including removing old lead of size 150 mm bore complete all as specified and as directed. |
| 37 | Burning out lead joint in position, including removing old lead of following size 200 mm bore complete all as specified and as directed. |
| 38 | M&L for run lead joint for following size of CI pipe of size 100 mm bore complete all as specified and as directed. |
| 39 | M&L for run lead joint for following size of CI pipe of size 150 mm bore. Complete all as specified and as directed. |
| 40 | M&L for rubber gasket joint/ tyton joint for DI pipe upto size 150 mm bore. Complete all as specified and as directed. |
| 41 | Taking out unserviceable CI sluice valve of any size any pattern up to 200 mm bore from 80 mm bore complete all as directed. |
| 42 | S&F Cast iron sluice valve of size 100 mm dia Stainless steel stem PN- 1.6 (Flanged) conforming to IS 14846 hand wheel operated. |
| 43 | S&F Cast iron sluice valve of size 150 mm dia Stainless steel stem PN- 1.6 (Flanged) conforming to IS 14846 hand wheel operated. |
| 44 | Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 15 mm dia, all as specified and directed. |
| 45 | Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 20 mm dia, all as specified and directed. |
| 46 | Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 25 mm dia, all as specified and directed. |
| 47 | Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 40 mm dia, all as specified and directed. |
| 48 | Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 50 mm dia, all as specified and directed. |
| 49 | Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 80 mm dia, all as specified and directed. |
| 50 | Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 100 mm dia, all as specified and directed. |
| 51 | Supply and laying of galvanised steel water tubing medium grade (in replacement) trenches / wall /floor with all fittings, connections as required at site of size 15 mm bore. |
| 52 | All as per Item No 18 Above but Bore of pipe 20 mm |
| 53 | All as per Item No 18 Above but Bore of pipe 25 mm |
| 54 | All as per Item No 18 Above but Bore of pipe 40mm |
| 55 | All as per Item No 18 Above but Bore of pipe 50mm |
| 56 | All as per Item No 18 Above but Bore of pipe 80mm |
| 57 | All as per Item No 18 Above but Bore of pipe 100mm |
| 58 | S&F gun metal globe valve (in replacement) with iron handle screwed both ends for iron pipe and fixed of size 15 mm bore :- |
| 59 | All as per Item No 19 Above but Bore of pipe 20mm |
| 60 | All as per Item No 19 Above but Bore of pipe 25mm |
| 61 | All as per Item No 19 Above but Bore of pipe 40mm |
| 62 | All as per Item No 19 Above but Bore of pipe 50mm |
| 63 | Taking out existing unserviceable NRV of size 80-150 mm bore complete all as directed. |
| 64 | Supply and fixing in replacement cast iron NRV flanged end of size 150 mm dia with all fitting and accessories . |
| 65 | All as per item 20 above but 100 mm dia |
| 66 | All as per item 20 above but 80 mm dia |
| 67 | M&L for cement concrete PCC 1:2:4 type B1 in plain cement concrete 20 mm graded crushed stone aggregate, complete all as specified and as directed. |
| 68 | M&L for road cutting and making good the same by bitumen complete all as specified and as directed |
| 69 | S & F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type of size 15mm bore dia, including taking out old unserviceable bib tap complete all as specified and as directed. |
| 70 | Supply only Chlorine test kit for test water chlorine content complete all as specified an as directed |
| 71 | Supply and fix MS/ galvanized iron pipe heavy duty both end flange welded 3 mtr length suitable to lowering and connecting with the existing column pipe including washer nut bolts complete all as specified and as directed |
| 72 | Brick masonry valve pit of size 90x90x90cms (internal dimension) with earth work in any type of soil, plain cement concrete M-10 type C-2 as in foundation, brick work in cement mortar 1:6 (01 cement : 06 coarse sand) 23cms thick, 15mm thick plaster in cement mortar 1:4 (01 cement : 04 coarse sand) internally and externally flush pointed in same mortar as the work proceeds flooring shall be 40mm thick in plain cement concrete M-15 (Nominal mix) laid over 75mm thick hard core top cover shall be made out of mild steel sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking arrangement at other side with 50mm pad lock complete including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified including demolition Unserviceable pit & pit cover. |
| 73 | M&L for testing water from approved Govt lab for portability by doing physical, chemical and biological analysis as per norms of WHO and submission of Test reports to the entire satisfaction of Engineer-in-Charge, complete all as specified and as directed. |
| 74 | M&L for taking down of CI/PPR/GI pipe of any size pipe upto 200 mm dia in any depth not exceeding 1 m depth Complete all as specified and as directed. |
| 75 | S&F DI pipe class K7 size 150 mm dia with spigot and socket ends and including Ethylene Propylene Diene Monomer (EPDM) rubber gasket conforming to IS:5382 of Bulb-Type-2 as per IS:5382; Heel-Type-5, as per IS:5382 complete all as specified and as directed. Note- Work includes cutting road and making good the same with necessary bitumen/ PCC. |
| 76 | S&F DI pipe class K7 size 100 mm dia with spigot and socket ends and including Ethylene Propylene Diene Monomer (EPDM) rubber gasket conforming to IS:5382 of Bulb-Type-2 as per IS:5382; Heel-Type-5, as per IS:5382 complete all as specified and as directed. Note- Work includes cutting road and making good the same with necessary bitumen/ PCC. |
| 77 | Supply and fixing in replacement of On load Changeover switch 250 Amps 4 pole 415 Volts front load operated complete all as specified and directed. |
| 78 | Supply and fixing in replacement of MCCB 250 Amps 4 pole 415 Volts 36 KA with adjustable thermal and adjustable magnetic settings fixed in repair as per existing at site and all as specified and directed by Engr-in-Charge. |
| 79 | Supply and fixing in replacement of MCCB 200 Amps 4 pole 415 Volts 36 KA with adjustable thermal and adjustable magnetic settings fixed in repair as per existing at site and all as specified and directed by Engr-in-Charge. |
| 80 | M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level surrounded on all sides by 150 mm thick charcoal & common salt starting from ground below earth plate upto 150mm above GI plate in alternate layers connected to GI strip 25 mm x 4 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, Jalli pit all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 40mm dia medium grade GI pipe for earth strip protection and 20 mm dia for watering complete, all excavation and earth work & connecting the earthing to an earthing test point /LT Panel as specified and testing on completion for desired result complete all as specified and directed by Engr-in-Charge. |
| 81 | Supply and fix PVC insulated 3 core summersible cable of size of 16 sqmm summersible pumps. |
| 82 | Supply and fix PVC insulated 3 core submersible cable of size of 25 sqmm submersible pumps. |
| 83 | Maintenance of Chamber cover with 25x25x4mm thick MS Angle iron frame and 3.0 mm thick MS chequered plate cover with hinges and necessary locking arrangements painting with two coats of synthetic enamel paint over one coat of red oxide primer existing colour all as specified and directed by Engr-in-Charge. Note:- Size of Chamber cover as per existing chamber |
| 84 | Supply and fix compact universal Stequa 411 AE refill bleaching applicator of multi-cavity 100 L water treatment station with proportional dose adjustment options. Diaphragm-free, tube based self priming fluid delivery drive unit to prevent air/vapour locks and dry run problems with prime lose Zero. Agitator-free system to prevent environmental corrosion, fluid release up to 5 LPH independent of back pressure up to 7 Bars. Erosion-enabled system for controlled release of chlorine with accurate output reproducibility integrated plug & play system operating on single phase 230 V 50 HZ power source. Complete all as specified and directed by the Engineer-in-Charge. |
| 85 | Supply, installation, testing & commissioning in replacement of factory made (CPRI test certified manufacturer) ASD starter panel of suitable size, indoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire, 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 600 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 3 mm (outer) & 2 mm (inner compartment door) CRCA sheet duly powder coated, panel mounted on angle iron 40x40x6 mm frame having 4 Nos legs 45 cm long of 40x40x6 mm angle iron, 15 cm grouted in PCC of ratio 1:2:4 of size 3x3 feet and 30 cm clear space front ground level. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size, thimbling and cable entry boxes with cable glands. The scope of the work also includes supply and fixing the following:-. Please Enable Macros to View BoQ information |
| 86 | Supply, installation, testing & commissioning in replacement of factory made (CPRI test certified manufacturer) ASD starter panel of suitable size, indoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire, 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 600 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 3 mm (outer) & 2 mm (inner compartment door) CRCA sheet duly powder coated, panel mounted on angle iron 40x40x6 mm frame having 4 Nos legs 45 cm long of 40x40x6 mm angle iron, 15 cm grouted in PCC of ratio 1:2:4 of size 3x3 feet and 30 cm clear space front ground level. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size, thimbling and cable entry boxes with cable glands. The scope of the work also includes supply and fixing the following:-. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender