Tender For Addition Alteration To Sncos Mess At Afs Digaru.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2026
16 days left
EMD
88500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Sncos Mess At Afs Digaru.- 1 Demolition Of Brick Work Built In Cement Mortar Complete All As Specified And As Directed. 2 Dismantling Old Broken Floor Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) And Rubbish Off The Premices Complete All As Specified And Directed. 3 Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/Loose Soil Complete All As Specified And Directed 4 Excavating In Trenches In Soft/Loose Soil, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out Complete All As Specified And As Directed. 5 Treating The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured) Complete All As Specified And As Directed. 6 Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Complete All As Specified And As Directed. 7 Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area Complete All As Specified And As Directed. 8 Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall Complete All As Specified And As Directed.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 2 | Dismantling old broken floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premices complete all as specified and directed. |
| 3 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed |
| 4 | Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. |
| 5 | Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed. |
| 6 | Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed. |
| 7 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed. |
| 8 | Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 9 | M&L PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and directed.. |
| 10 | Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm deep as in soil complete all as specified and as directed. |
| 11 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point as in soil complete all as specified and as directed. |
| 12 | M&L RCC M25 grade (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete.all as specified and directed. |
| 13 | M&L RCC M25 grade (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 14 | M&L RCC M25 grade (Design Mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 15 | M&L RCC M25 grade (Design Mix) using 20mm graded stone aggregate as in chhaja and the like complete all as specified and directed. |
| 16 | M&L RCC M25 grade (Design Mix) using 20mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 17 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 18 | M&L for TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to deformed or twisted bars complete all as specified and directed. |
| 19 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binderss complete all as specified and directed.. |
| 20 | M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work for rough finished flat surfaces complete all as specified and directed.. |
| 21 | M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough finished flat surfaces complete all as specified and directed. |
| 22 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc. for rough finished flat surfaces complete all as specified and directed.. |
| 23 | M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces complete all as specified and directed.. |
| 24 | M&L for 40mm thick cement concrete 1:2:4, type B-0 Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 25 | M&L for brick work with sub class 'B' bricks (Old size bricks) straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and as directed. |
| 26 | M&L for brick work with sub class 'B' bricks (Old size bricks) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 27 | M & L for rendering 10 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 28 | M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) in two separate coats (10mm thick backing coat and 5mm thick finishing coat. Finishing coat shall be mixed with integral water proofing compound (WPC shall be measured seperetly) on wall finishing the surfaces even and fair without using extra cement complete all as specified and as directed. |
| 29 | Supply only water proofing compound (liquid),ISI marked complete all as specified and as directed. |
| 30 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and as directed. |
| 31 | M&L 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and as directed. (Frame work for ceiling shall be measured and paid separately) |
| 32 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 or other cuting plates complete all as specified and directed. |
| 33 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 34 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 35 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 36 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on th, e front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 37 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 38 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing. |
| 39 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as spd. |
| 40 | S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and as directed. |
| 41 | S&F 18/19 thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete all as specified and as directed. |
| 42 | S&F 100mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and as directed. |
| 43 | S&F Continuous (piano) hinges 30mm width of flap, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 44 | S&F powder coated aluminium frame for doors, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 45 | S&F powder coated aluminium door shutters, aluminium shutters, aluminium section weighing 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised alumnium snap beading, screws etc. complete all as specified and as directed. |
| 46 | S&F powder coated aluminium window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and as directed. |
| 47 | S & F anodised aluminium grill (anodised transparent or dyed to require shade according to IS -1868 with minimum anodic coating of grid AC-15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as specified and as directed. |
| 48 | S&F double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. |
| 49 | S&F cast brass fanlight pivot with plate size 25mmx65mm and suitable for shutter of 35mm thick complete all as specified and as directed. |
| 50 | S&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified and as directed. |
| 51 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 52 | S&F 5.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified and as directed. |
| 53 | S&F 5.00 mm thick frosted Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete all as specified and as directed. |
| 54 | M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work complete all as specified and as directed. |
| 55 | M & L for cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and as directed. |
| 56 | S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed. |
| 57 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and as directed. |
| 58 | S & F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 59 | S & F Aluminium anodised handles of extruded section fabricated type and fixed 125 mm long complete all as specified and as directed. |
| 60 | S&F Floor door stopper of Overall length of cover plate 140mm, aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 61 | M&L for double charged/ultracharged Vitrified Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 62 | M&L for double charged/ultracharged Vitrified Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished in skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 63 | M&L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 64 | M&L for non skid joint free coloured ceramic tlle 7 to 8 mm thick (square or rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match with and incluiding 15 mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 65 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) in skirting, dado, etc incl 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed. |
| 66 | M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and as directed. |
| 67 | M & L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, etc complete all as specified and as directed. |
| 68 | M&L for Cement concrete 25mm thick 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in levelling course, flooring / hardstanding, coping, window cill etc complete all as specified and as directed. |
| 69 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 complete all as specified and as directed and the rate shall be deemed to included in the unit rate. |
| 70 | M&L for Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 71 | S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) including 20mm mm bore PTMT ball valve hoisted and fixed in positions all as specified in SSR Part-I, screwed for iron/cpvc pipe and fixed complete all as specified and as directed. |
| 72 | S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed. |
| 73 | S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed. |
| 74 | Cutting chases, pinning in, brick wall and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed. |
| 75 | S&F for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed . |
| 76 | S & F 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed |
| 77 | S & F 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 78 | S&F for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed |
| 79 | S&F in repair vitrious china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed |
| 80 | S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour complete all as specified and as directed. |
| 81 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections complete all as specified & directed. |
| 82 | S&F in repairs 15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \\"Hot or Cold\\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed |
| 83 | S&F CP towel rail, 20mm dia, D type,60cm long complete all as specified and as directed. |
| 84 | S&F for 15 mm dia Brass CP mixer hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 85 | S & F for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed. |
| 86 | S&F 15mm dia angle stop valves cast copper alloy faney type,chromium plated complete all as specified and directed |
| 87 | S&F Vitreous China urinals,half stall type complete including ,waste pipe, waste coupling, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed. |
| 88 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 89 | S&F looking mirror 600x450mm selected quality 5mm thick glass mounted on 6mm ply wood & fixed with brass screw & cup washer complete all as specified and as directed. |
| 90 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 91 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 92 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete all as specified and as directed. |
| 93 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 94 | S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and as directed. |
| 95 | S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and as directed. |
| 96 | S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door complete all as specified and as directed. |
| 97 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 98 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each complete all as specified and as directed. |
| 99 | All as per item Sl No 98.00 above item but exc1.5 Sqm but n.exc. 4 Sqm. |
| 100 | Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site |
| 101 | All as item Sl No 100.00 above above but for 20 mm dia bore pipe |
| 102 | M & L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted over a coat of primer over & incl two coat of wall care putty complete all as specified & directed |
| 103 | M&L for preparation of newly surface of ceiling and applying two coat of oil bound distemper over a coat of alkali resistant primer & incl two coat of wall care putty complete all as specified and as directed. |
| 104 | M&L for preparation of newly plastered surface and applying two coat of Acrylic Smooth exterior paint of required shade (Camouflage) applied over and including priming coat of exterior primer applied complete all as specified and as directed. |
| 105 | M/L preparation of new wooden surface of any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and as directed. |
| 106 | M&L for complete removal of existing treatment by wire brushing, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in CM 1:3 & applying one coat wall care putty on the surface with uniform thickness & making surface absolutely smooth & applying two coats of distemper oil emulsion white or tinted over a coat of primer complete all as specified and as directed. |
| 107 | M & L for preparation of old decorated of wall surfaces and applying one coat of oil bound distemper on walls, white or tinted complete all as specified and as directed. |
| 108 | M & L for preparation of old decorated surfaces ceiling and applying one coat of oil bound distemper on walls, white or tinted complete all as specified and as directed. |
| 109 | M&L for preparation of old wall surfaces and applying one coat of Acrylic Smooth exterior paint of required shade complete all as specified and as directed. |
| 110 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint),any colour complete all as specified and as directed. |
| 111 | M&L for grinding & polishing to old kota stone slab flooring to match the shade of the slab complete all as specified and as directed. |
| 112 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 113 | Taking down submain wiring with of any specification and size complete all as specified and as directed. |
| 114 | Taking down MCB DB/ sheet metal plug top/ industrial socket incl MCCB/MCB's of any size and specification complete all as specified and as directed. |
| 115 | Taking down and refixing of C/Fan of any size and specification after Painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed. |
| 116 | Taking down incl refixing exhaust fan of any size and specification complete all as specified and as directed. |
| 117 | M&L for point wiring for light points / ceiling fan points / exhaust fan points/ call bell points controlled by one, one way modular switch with (FRLSH) PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including , PVC medium grade Concealed conduit not less than 20mm dia with Modular metal sunken box and Modular cover plate and frame, screws incl all necessary wall cutting and making good disturbed surface complete all as specified and as directed. Note : Cutting chases & making good to disturbed surfaces to match with the adjoing suracfes shall be deemed to be included with the unit rate complete all as specified and as directed. |
| 118 | All as per item Sl No 117.00 here-in-before but for one 6 amps modular socket out let point on the same board with other switches complete all as specified and as directed. |
| 119 | All as per item Sl No 117.00 here-in-before but for one 6 amps modular socket out let point on independent board complete all as specified and as directed. |
| 120 | All as per item Sl No 117.00 here-in-before but for one modular socket outlet 16 amp on independent board with 2.5 Sq.mm cable and 2.5 Sq.mm earth wire complete all as specified and as directed. |
| 121 | M&L Sub main wiring power/circuit using FRLS, PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4.0 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC conduit 20mm dia medium Grade Concealed in walls/roof/floors complete all as specified and as directed.(Note : (i) Two single core wires of 4.0Sqmm and one wire of 4.0 Sqmm and one run of PVC conduit shall be measured as one unit). (ii) The unit rate included for making good the disturbed surface including finishes to match with the adjoining surfaces alongwith cutting chases) . |
| 122 | M&L Sub main wiring power/circuit using FRLS, PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6.0 Sqmm, earth continuity conductor of size 6.0 Sqmm to be drawn through and including PVC conduit 25mm dia medium Grade Concealed in walls/roof/floors complete all as specified and as directed.(Note : (i) Two single core wires of 6.0Sqmm and one wire of 6.0 Sqmm and one run of PVC conduit shall be measured as one unit). (ii) The unit rate included for making good the disturbed surface including finishes to match with the adjoining surfaces alongwith cutting chases) . |
| 123 | M&L Sub main wiring power/circuit using FRLS, PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC conduit 20mm dia medium Grade Concealed in walls/roof/floors complete all as specified and as directed.(Note : (i) Two single core wires of 2.5Sqmm and one wire of 2.5 Sqmm and one run of PVC conduit shall be measured as one unit). (ii) The unit rate included for making good the disturbed surface including finishes to match with the adjoining surfaces alongwith cutting chases) . |
| 124 | S & F Modular Switch 6 Amps, one way, one module complete all as specified and as directed. |
| 125 | S & F Modular Switch 16 Amps, one way, one module complete all as specified and as directed. |
| 126 | S & F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed. |
| 127 | S & F Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed. |
| 128 | S&F Call bell Ding dong type 230 volts AC complete all as specified and directed. |
| 129 | S&F Modular Bell push switch 6 amps, 1 module complete all as specified and directed. |
| 130 | S & F Modular Stepped type fan regulator complete all as specified and directed. |
| 131 | S&F ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and as directed. |
| 132 | S & F in repair LED Tube light fitting (BRIGHT LINEA) of 20 watt (>125 Lm/W) with IP40 batten features a durable extruded aluminium body with high quality PC diffuser for illumination its slim integrated design ensures easy installation, while high efficiency options enhance energy efficiency natural white complete all as specified and as directed. |
| 133 | S & F in repair LED Building Secirity Light 25 watt made up of pressure die cast aluminiun housing with highly efficient LEDs and PC cover with integrated lens with Cool Day White (6500K) | Ip66 Water Proof Outdoor Light | Lens Technology | Corded Electric | Aluminium Heat Sink | 4Kv Surge, 440V High Voltage Protection and bracket suitable for street light made out of GI pipe light grade of 25 mm bore & 0.75 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer complete all as specified and as directed. |
| 134 | S&F Recessed Mounted/Ceiling Square (2'x2') LED Panel light 36/40 watt with CRCA powder coated housing & high transmittance Opal diffuser for glare free with Electronic LED Driver. IP20, PF ≥0.95, System Lumens ≥100 lm/W, 5700k CRI ≥ 80, Operating Voltage range 140 V - 270 V Complete all as specified and directed. |
| 135 | Supply and fixing ceiling fans complete with blades, down rods, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 136 | M&L for cutting and making and enlarging existing hole for fixing of exhaust fan with nuts, bolts washer including plastering and make good the disturbed surface with the existing complete all as specified and as directed. |
| 137 | S&F in repair of 300 mm Heavy duty exhaust Fan (1400 Rpm)-Grey (minimum) metal body AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint complete all as specified and directed. |
| 138 | S&F Metal Plug Socket DB with sheet metal enclosures with two pin and earth plug and socket one double pole MCB 20 Amps,240V for AC/Geyser connenction complete all as specified and as directed. |
| 139 | S&F VTPN DB for MCCB incomer, 8 ways double door,Metal door ,IP-43 IK 09 in 250A rated copper bus bars,earth bar,neutral links, no. of module DPX 160+24 complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as direct. |
| 140 | S&F MCCB 4P 160 Amps 415V, 50 Hz ,breaking capacity 25 KA . Complete all as specified and directed. |
| 141 | S&F MCB TP 32 Amps 240V ,50 Hz ,breaking capacity 10 KA,\\" C \\" series complete all as specified and as directed. |
| 142 | S&F SPN DB for MCB 12 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed |
| 143 | S&F TPN DB for MCB 4 ways double door,Metal door,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed |
| 144 | S&F MCB SPN 32 Amps 240V ,50 Hz ,breaking capacity 10 KA,\\" C \\" series complete all as specified and directed. |
| 145 | S&F MCB SPN 40-63 Amps 240V ,50 Hz ,breaking capacity 10 KA,\\" C \\" series complete all as specified and directed. |
| 146 | S&F MCB SP,10KA, 230V, C-curve, 6-32 Amps complete all as specified and directed. |
| 147 | S&F MCB SP,10KA, 230V, C-curve, 63 Amps complete all as specified and directed. |
| 148 | S&F MCB TPN,10KA, 230V, C-curve, 32 Amps complete all as specified and directed. |
| 149 | M&L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead wire of 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I pit cover with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion incl taking down old UNSV one complete all as specified and as directed. |
| 150 | Supply & fix Air Circulator fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting.( for dining hall) complete all as specified and as directed. |
| 151 | Excavation in trenches, in any type of soil not exceeding 1.5m wide or 10 Sqm on plane and not exceeding 1.5m in depth for foundation, Pole, shafts, cesspits, manholes, pier holes, laying of UG cables etc and getting out in any type of soil complete all as specified and directed. |
| 152 | Returning, filling in excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and as directed. |
| 153 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 154 | Material and labour for clean and dry sand (unwashed) in trenches and cable ducts including spreading and levelling for cushioning of underground cables complete all as specified and as directed. |
| 155 | Supply and laying well burnt sub class 'B' old size bricks, laid flat dry, in trenches with width of the bricks laid to the axis of cable for cable protection complete all as specified and as directed. |
| 156 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender