Tender For Reconstruction Of Product Godown At Old Zop Area
Tender Value
2.49 Crore
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
4.22 Lakhs
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Reconstruction Of Product Godown At Old Zop Area
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removal of R.R. masonry/brick masonry / plain cement concrete work, etc. height upto 4.5m and dumping the debris within a lead of 500m by means of manually/mechanically, etc. complete as per the direction of Engineer-in-charge. |
| 2 | Dismantling and removal of RCC foundation/ column/ slab / beam, etc. in all heights upto 4.5m including all necessary scaffolding and dumping the debris within a lead of 500m by means of manually /mechanically, etc., complete as per specification and as directed by the Engineer-in-charge. |
| 3 | Earthwork excavation for foundation in all types of loose / hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc. by means of manually / mechanically complete as per specification and as directed by the Engineer-in-charge. |
| 4 | Earth filling for foundation/ flooring work using departmental sand including all transportation of filling sand/ building debris from HUP to site, levelling works, watering, compaction, consolidation, etc. by means of manually/ mechanically complete as per standard specifications and as directed by the Engineer-in-charge. |
| 5 | Supplying and spreading of 150mm consolidated thick gravel of approved quality above the refilled earth surface with watering, levelling works, compaction and consolidating, etc. by means of manually/ mechanically complete as per specification and as directed by the Engineer-in-charge. |
| 6 | Supplying, providing and laying soling stone 300mm thick over the existing sub base/sub grade including levelling and consolidation to form a compact surface using hard blue granite soling stone with hand packing, wedging them tightly and filling the voids with loose sand, watering and sweeping the sand into the joints so that the hole is formed as solid mass, etc. complete as per standard specification and as per the direction of Engineer-in-charge. |
| 7 | Supplying, providing and laying PCC 1:4:8 mix for foundation / flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 8 | Supplying, providing & laying RR masonry foundation/ wall / retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 2.5 m below ground level to 4.5m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the Engineer-in-charge. |
| 9 | Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation/kerb wall/wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 10 | Supplying, providing and laying PCC 1:2:4 mix for foundation/ flooring work/kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge. |
| 11 | Supplying, providing and fixing twisted reinforcement IS 1786 HYSD bars Fe500D/Fe550D (TMT bars - TATA/ Agni/ JSW) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of Engineer-in-charge including binding, provision of spacer bars, cover blocks and all other incidental charges, necessary scaffolding, staging, safety arrangements, etc. complete for all RCC works (item No. 12, 13 & 39) upto 15m height as per standard specification and as per the direction of Engineer-in-charge. |
| 12 | Supplying, providing and laying cement concrete 1:1.5:3 for RCC works (foundation/ column/ beam/ retaining/ encasing, etc.) height upto 4.5m using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 13 | Supplying, providing and laying cement concrete 1:1.5:3 for RCC works (column/ beam/retaining wall/ encasing, etc.) from 4.5m to 15m height using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering / shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 14 | Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc. for floors & walls upto 4.5m height with neat finishing and necessary grouting, scaffolding, staging, safety arrangements, fibre mesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 15 | Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls height from 4.5m to 15m with neat finishing and necessary grouting, scaffolding, staging, safety arrangements, etc., fibre mesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 16 | Supplying, plastering with CM 1:3 mix 12mm thick one coat floated hard & trowelled smooth for RCC beam, column, ceiling, wall & floor upto 4.5m height with neat finishing and necessary grouting including all scaffolding, including fibremesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 17 | Supplying, plastering with CM 1:3 mix 12mm thick one coat floated hard & trowelled smooth for RCC beam, column, ceiling, wall & floor height from 4.5m to 15m with neat finishing and necessary grouting including all scaffolding, including fibremesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 18 | Dismantling and removing of damaged steel structural fully/ partly such as roof/ side cladding, purlin, trusses, bracings, columns etc. i.e. MS angle, channels, plate, beam, etc. upto 15m height using proper tools and plants without damaging the adjacent structures including providing temporary supports for the structure at dismantled portion and nearby structures lowering the dismantled items carefully and staking materials useful for reuse at convenient place as directed by the company authorities and depositing the waste materials in the scrap yard including all labour charges, hire charges for tools and plants loading, unloading charges, providing necessary scaffolding, safety arrangements etc. complete as per standard specification. |
| 19 | Supplying, fabrication and erection of MS steel structural such as column/beam/truss/purlins/ bracing/ plate/ brackets, etc. by using ISHB, ISMB, NPB, ISMC, ISA, Flat, Plates etc. upto 15m height by welded or bolted connection including cutting, welding, jointing to suit the dismantled portion for replacing the worn-out members of the existing trusses/ purlins/ bracings/column/structure or full members, etc. as directed by Engineer-in-charge with providing necessary scaffolding, safety arrangements, all conveyance charges, loading/unloading charges, etc. complete as per standard specification (Structural steel conforming to IS 2062:2011 / IS12778 of make TISCO/SAIL/ RINL/ JSW/AM/NS INDIA). |
| 20 | Fabrication and erection of departmental old MS steel structural such as column/beam/truss/purlins/ bracing/ plate/ brackets, etc. by using ISHB, ISMB, ISMC, ISA, Flat, Plates etc. upto 15m height by welded or bolted connection, including cutting, welding, jointing to suit the dismantled portion for replacing the worn-out members of the existing trusses/ purlins/ bracings / column /structure or full members, etc. as directed by Engineer-in-charge including providing necessary scaffolding, safety arrangements with all conveyance charges, loading/unloading charges, etc. complete as per standard specification (Departmental steel will be issued on free of cost). |
| 21 | Dismantling and removing of damaged roof sheet and side cladding fully/partly upto 15m height using proper tools and plants without damaging the adjacent structures, lowering carefully and stacking materials useful for reuse at convenient place as directed by the company authorities and depositing the waste materials in the scrap yard including all labour charges, hire charges for tools and plants loading, unloading charges, providing necessary scaffolding and safety arrangements, etc. upto 15m height complete as per standard specification and as directed by Engineer-in-charge. |
| 22 | Laying and fixing of roof sheet i.e. departmental dismantled reusable A.C/Aluminium sheet with 8mm dia new G.I. polymer coated bolts & nuts (2 nos. per sqm) (White Colour- Aargee Associates /equivalent make) to suit the existing M.S.angle/ channel, purlin (for fixing bolt hole to be made with drilling machine only) etc. including providing necessary scaffolding, safety arrangements with all conveyance charges, loading/unloading charges, etc. upto 15m height complete as per standard specification and as directed by Engineer-in-charge. (Rate excluding cost of A.C./Aluminium sheets) (Minimum required overlapping is 15cm). |
| 23 | Supplying, providing, laying and-fixing of roof sheet with 1.2-2mm thick Aluminium corrugated roof sheet (Everlast/ Jindal brand) upto 15m height with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per sqm.) (White colour - Aargee associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only) including providing necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 15cm). |
| 24 | Supplying, providing and fixing Aluminium sheet/ Aluminium ridges (0.71mm thick and 900 mm wide) (Hindal Co-Everlast/ Balco) uptp 15m height with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per m) (White colour - Aargee Associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only), including edges fixing with aluminium riveted joint, with necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 25 | Supplying, providing and fixing Aluminium sheet valley gutters (0.71mm thick and 900 mm wide) (Hindal Co-Everlast/ Balco) upto 15m height with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per m) (White Colour - Aargee Associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only), including edges fixing with aluminium riveted joint, with necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 26 | Supplying, providing and fixing of roof sheet with 3mm thick Transparent FRP corrugated sheet (green/white) upto 15m height with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per sqm.) (White colour - Aargee Associates/equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only) including necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 15cm). |
| 27 | Supplying, fabricating and fixing in position of 2mm thick chequered aluminium (Jindal/Hindalco) plate with bolting the same with the frame of gate @ 300mm spacing or nearest upto 15m height etc. Complete as per specification and as directed by Engineer-in-charge. |
| 28 | Supplying, providing and fixing of roof sheet with 0.47mm thick powder coated sheet/ powder coated end curved sheet [TATA - Durashine/JSW colouron+ ( blue / red)] with riveted joint/necessary fixing arrangements to suit the existing M.S. angle/channel, purlin, GI pipes, etc. upto 15m height including necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. (Minimum required overlapping is 15cm). |
| 29 | Supplying, providing and fixing of roof sheet with 3mm thick UPVC corrugated/trafford/trapezoidal roof sheet (Tetto Colour / Sun-Arch) Colour (blue/green/white/red/grey) upto 15m height with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per m) (White colour - Aargee Associates/ equivalent make) to suit the existing M.S. angle/channel, purlin, GI pipes (for fixing bolt hole to be made with drilling machine only), etc. including necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. (Minimum required overlapping is 15cm). |
| 30 | Supply of paints and painting two coats with epoxy coal tar paint (Asian/Berger) over a coat of epoxy zinc-chromate /zinc-phosphate primer (Asian/Berger) including chipping, scrapping and cleaning the surface up to 15m height with necessary scaffolding, staging, safety arrangements, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 31 | Supply of paints and painting one coat with epoxy coal tar paint (Asian/Berger) over a coat of epoxy Zinc-chromate /zinc-phosphate primer (Asian/Berger) over the existing painted surface of steel structurals including all steel scaffolding, staging and all safety arrangements in running plant and other building and thorough scrapping and cleaning the surface upto 15m from floor level without affecting the plant operations, etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 32 | Supplying and painting two coats with epoxy smoke grey paint (Asian/Berger) over a coat of epox zinc-chromate/ zinc-phosphate primer (Asian/Berger) including chipping, scrapping and cleaning the surface up to 15m height with necessary scaffolding, staging, safety arrangements, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 33 | Supply of paints and painting one coat with epoxy smoke grey paint (Asian/Berger) over a coat of epoxy Zinc-chromate /Zinc-phosphate primer (Asian/Berger) over the existing painted surface of steel structurals including all steel scaffolding, staging and all safety arrangements in running plant and other building and thorough scrapping and cleaning the surface in all heights upto 15m from floor level without affecting the plant operations, etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 34 | Supply of paints and painting two coat with exterior / interior emulsion paint (Asian/Berger/ Nippon) 1st quality of approved shade for the external/internal surface of the buildings over a coat of wall primer (Asian/ Berger/ Nippon) upto 15m height from ground level, including thorough scrapping, cleaning, removal of dirt of existing surface, all tools & tackles, sandpaper and scaffolding arrangements, and applying crack filler/wall putty touch-up works wherever required etc. complete as per specification and as directed by the Engineer-in-charge. |
| 35 | Supply of paints and painting two coat with 1st quality enamel / touch wood paint of approved shade (Asian / Berger / Nippon) matching to the existing for all doors, windows, false ceiling, etc. over a coat of wood sealer/primer and putty wherever required including thorough cleaning and removal of dirt and necessary scaffolding arrangements, upto 15m heights, etc. complete as per specification and as directed by the Engineer-in-charge. |
| 36 | Supplying and fixing of aluminium turbo external braced industrial wind ventilator (Runner dia: 60cm, height: 60cm & weight: 1-2kg) (Giant impex/Supreme/MPS) with necessary base arrangement, including necessary clamping upto 15m height etc. complete as directed by Engineer-in-charge (Rate including cost of all materials). |
| 37 | Supplying and fixing of 6kg PVC collecting pipe (160mm dia) (Finolex/Ashirvad) at the end of rainwater collecting bowl with suitable powder coated clamps (2-5mm thick) and necessary fittings elbow, bend, coupling, solvent cement, scaffolding arrangements, upto 15m height etc. complete as per the direction of Engineer-in-charge. (Rate including cost of all materials). |
| 38 | Supplying, fabricating and fixing of required size ISI standard 'C' class GI round / square/ rectangular pipe for roof, gate, partition, shed including painting the pipe with two coat with 1st quality enamel paint of approved shade (Asian/ Berger/Nippon) over a coat of primer (Asian/ Berger/Nippon), including necessary scaffolding, safety arrangements upto 15m height, etc. complete as per specification and as per the direction of Engineer-in-charge. |
| 39 | Supplying, providing, laying vibrated cement concrete 1:1.5:3, 120mm thick for floor/roads over the existing surface using 20mm and below grade hard blue granite jelly, including neat cleaning, removal and satisfactory disposal of all materials necessary for the construction of floor/roadway, all form works, leveling, machine mixing, laying, consolidation/ compaction with plate vibrators including power trowel neat finishing, provision for expansion joints and proper curing, etc, complete as per the standard specification and as per the direction of Engineer in-charge. (Test certificate has to be provided). |
| 40 | Supplying, providing and fixing 1st class Malaysian Vengai wooden ventilators (panel/ louver) consists of 100x70mm outer frames and 75x32mm middle horizontal / vertical frame with provision of 4mm thick plain/louver glass, MS grill arrangements upto 15m height including all necessary fittings, etc. complete as per the direction of Engineer-in-charge. |
| 41 | Engagement of Fitter for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). |
| 42 | Engagement of Mason for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost). |
| 43 | Engagement of labour (Mazdoor) for miscellaneous work complete as directed by the Engineer-in-charge. (Required materials will be issued by company on free of cost). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender