Tender For special repair To electrical installation To Repairing To Fire Fighting Pump System At 180 Ipd Building At Prmmch Baripada In The District Of Mayurbhanj For The Year 2026-27.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
7 days left
EMD
31750
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To electrical installation To Repairing To Fire Fighting Pump System At 180 Ipd Building At Prmmch Baripada In The District Of Mayurbhanj For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Installation Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal pump delivering 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal (for Wet riser & Sprinkler system) with 2 pole TEFC motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply and complying to TAC norms including providing base frame coupling,coupling guard as per direction of Engineer-in-charge (Make:PUMP:KBL/ Grundfos / KSB/ Wilo) |
| 2 | Supply , installation, testing & commissioning of Diesel Engine driven end suction Back pullout type Centrifugal pump having 2280 LPM at 70 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal and suitable diesel engine complying to TAC norms along with all accessories including control wiring between panel & DG set and fuel storage tank including providing base frame coupling,coupling guard as per direction of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo) |
| 3 | Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal Jocky pump delivering 180 LPM at 70Mtr head with CI casing bronze impeller , SS shaft with mechanical seal and 2 pole TEFC electric motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply including providing base frame coupling,coupling guaaard as per direction of Engineer-in-charge..(Make:Kirlosker/ Gunfoss / KSB/ wilo) |
| 4 | S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by Red out & inside gray powder cote paint is designed as G.A drawing. (FOR FIRE FIGHTING) BUILDING POWER)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD shall be installed in the incomer. 40X10MM Separate Aluminium Earth bus bar should be installed.INCOMING: One(1)- 200 Amp 25 KA TP with solid neutral SDFU with HRC fuses 3 nos (Make-Legrand/Siemens/Schneide/ABBr) including 01 no of MFM with RS 485, 3 Nos 200/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and SP 6A MCB ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200). . Busbar- 04 numbers of 300Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. OUTGOING: a)One(1)-160 Amp 25kA TP MCCB with ROM 25kA with adjustable MICRO PROCESSOR Release with Ics=100% Icu. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA), along with star delta starter incorporating 3 nos Power 3P contactor with top add on(2NO+2NC) ,Bimetal OLR of suitable rating,axulary contactor , ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 250/5, Ammeter .b) 1 No (Outgoing) – 63 Amp 25kA TP MCCB with ROM 25kA with adjustable MICRO PROCESSOR Release with Ics=100% Icu. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA), along with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/Sc) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel,hotor, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required. |
| 5 | Supply & Laying of XLPE power cable of 1.1 KV grade of following size on Cable3C X 70 sqmm |
| 6 | 3C X 16 sqmm |
| 7 | 8C X 2.5 sqmm |
| 8 | 2C X1.5 sqmm |
| 9 | 70sqmm 3 1/2 core main panel room to fire fighting room |
| 10 | Supply and making end termination with brass compression gland and aluminium logs for following size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required.3 1/2 x 70sqmm |
| 11 | Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)3C X 70 sqmm |
| 12 | 3C X 16 sqmm |
| 13 | Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.MAKE:JINDAL/TATA/SAIL200mm NB |
| 14 | 150mm NB |
| 15 | 100mm NB |
| 16 | 80mm NB |
| 17 | 65mm NB |
| 18 | 50mm NB |
| 19 | 40mm NB |
| 20 | 32mm NB |
| 21 | 25mm NB |
| 22 | Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.Make-Zoloto/AUDCO/Leader150mm NB |
| 23 | 100mm NB |
| 24 | 80mm NB |
| 25 | Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. Make-Zoloto/AUDCO/Leader150mm NB |
| 26 | 100mm NB |
| 27 | Supply,Installation,Testing & Commissioning of orifice plate made of 6mm thick stainless steel with orifice of required size in between flane and landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 Kg/ sq cm complete as required. |
| 28 | Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge.MAKE: H.GURU/G.GURU |
| 29 | Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.MAKE: DANFOSS/INDFOSS |
| 30 | Supply,Installation,Testing & Commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel sheet with 3 mm dia hloes with stainless steel flange as required.Make-Zoloto/AUDCO/Leader150 MM |
| 31 | 100 MM |
| 32 | Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required. |
| 33 | Supply,Installation,Testing & Commissioning of 150 NB C.I. PRV with matching flanges as per direction of Engineer-in-charge. |
| 34 | Supply,Installation,Testing & Commissioning of 150NB Alarm Valve , Water Motor Gong Retarded Chamber, Flange to:- ANSI B 16. 1 Class 125/ANSI B16.5 Class 100, All Components are UL Listed/FM Approved , Rated pressure 17.50 kg/cm2, Test pressure 500PSI confirming to IS :15105:2002 with ISI mark as per direction of Engineer-in-charge. Make-Newage/Honeywell/Minimax |
| 35 | Supply,Installation,Testing & Commissioning of 1 HP dewatering pump, Submersible type, 55 LPM, 3 - 42 mtr head, B Class insulation, working voltage range - 180 - 240 volt, Auto start Auto stop with float sensor complete with all the wiring of starter panel with auto and manual operation selector switch as per direction of Engineer-in-charge. Make-Newage/Honeywell/Minimax |
| 36 | Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire/Flameklog .4.5 kg capacity |
| 37 | Providing and fixing ABC type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire.6 kg capacity Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender