Tender For special repair To Pwd Road To Tangisahi For The Year 2026-27
Tender Value
16.94 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
8 days left
EMD
17000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Pwd Road To Tangisahi For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Road WorkConstruction of Granular sub-base by providing Close graded Granular Sub-base Grading-III material as per table-400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including cost, conveyance taxes, royality, additional charges, DMF 10% & EMF 5% over royalty cess complete as per direction of the Engineer in charge |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density including lighting, barricadding and maintenance of diversion etc. as per Tables 400.11 & 400.12 and Technical Specification clause 406 with cost of all labour, T&P and with cess, royality, additional charges, DMF 10% & EMF 5% over royalty and as per direction of Engineer-In-Charge. |
| 3 | Providing cement concrete (1:1.5:3) with 12mm size clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering if neCessary with cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and Cess as per the specification and direction of Engineer-in-charge |
| 4 | Protection WallEarth work in excavation in foundation in hard soilincluding hard moorum, stony earth mixed with boulders (except sheet rock & boulders requiring blasting) with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads & lifts including cost of all labour, Cess & T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge |
| 5 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, additional charges, DMF 10% & EMF 5% over royalty, Cess & taxes of all materials & cost of all labour required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 6 | Providing Cement Concrete (1:3:6) with 40mm size clean crusher broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, additional charges, DMF 10% & EMF 5% over royalty including hire & running charges of machineries T&P required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge |
| 7 | Providing cement concrete (1:2:4) with 12mm size clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering if neCessary with cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and Cess as per the specification and direction of Engineer-in-charge. |
| 8 | Providing and supplying of HYSD bars confirming toapproved grade including straightening cutting bending bindiing lapping , welding etc confirming to ISI specification) & jointing if neCessary by lapping & tying the grills &placing in position as required for RCC works as per the approved design placing the grills in position including cost & conveyance of tor steel & binding wires of 18 to 20 guage including Cess etc complete as per the specifiction and direction of Engineer-in- charge |
| 9 | Providing weep holes in abutments and wing walls using 10 CM dia AC pipes including metal spall backing in rear side etccomplete including centering and shuttering if required, with cost, conveyance of all materials, labour with T&P, Cess, required for the work and as per direction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender