Housing Urban and Rular Development Government Departments Closing in 7 days TDR #56353393

Tender For Repair And Renovation Work Of The Auditorium Hall Of Odisha Judicial Academy Cuttack

Issued by Government Departments · Cuttack, Odisha
Tender Value
6.83 Crore
Estimated cost
Bid Submission
20 Jul 2026
7 days left
EMD
6.83 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Repair And Renovation Work Of The Auditorium Hall Of Odisha Judicial Academy Cuttack

BOQ

Name of Work:- Repair and Renovation work of the Auditorium Hall of Odisha Judicial Academy Cuttack
Sl. No. Item Description
1EI works - Sub-Head I(Modular Wiring Items)Wiring- Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard/Gloster with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. NB:All the electrical,Fire fighting,HVAC,ELV drawings, Technical Data Sheets & make will be approved by SE R& B Electrical circle Odisha ,Bhubaneswar prior to execution of the work.Group A
2Group B
3Group C
4Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
5Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/-Schneider(Zencelo)//PANASONIC(VISION)
6Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
7Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover(falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
8Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
9Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard /Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
10Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
11Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard /Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
12Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard /Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
13Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB ITUS as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.4 Way(8+(4x3)+(3x4)) Way TPN MCB DD 7 Segment DB Horizontal Type as per IEC 61439-3 with configuration of incomming I-8 modules,sub incommer-12 module & out going-12 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
14Supplying and fixing 63Amps 4P 415 volts MCB Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..Warranty on MCB is 1 years.
15Supplying and fixing 63 Amps rating,C series,10KA breaking capacity, 2P, 230 volts, RCCB 30mA . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year
16Supplying and fixing of Type (I +II) 3P+N SPD with Lightening impulse discharge current I imp(10/350) µs 7kA/POLE and 25kA total and maximum discharge current Imax(8/20) msec-50kA,with response time<25 nanosec in the incommer of Distribution board, Make-LEGRAND / Siemens/ Schneider/OBO/Dehn/ABB/ABB in the existing MCB DB with connections as per direction of Engg.-in-Charge.The SPD should have Replacement Warranty will be 1 years.
17Supplying and fixing 40Amps 2P 240 volts AFDD+MCB(arc fault detection device) Make-ABB S ARC1 M/Equivalent model of Schneider/Legrand/Siemens ,10KA,C series,1PH+N,IEC-62606 for arc fault in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.Warranty on MCB is 1 year
18Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year.
19Supplying an fixing of recess/surface mounted 2'x2' 40 W(595mmx595mmx70mm) square shaped dali dimmable LED with lumen efficacy not less than 120lm/W, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5years.
20Supply and fixing of DALI Controller wireless IoT System having BLE 5.2 AES 128 Bit encyption based 32 channel DALI controller and analog 2 channel (0-10V) output, operates on 100-277 VAC, 10- 30mA, 50Hz, DALI 2.0 protocol. Sensor input of 0-3V DC & 1mA. For analog dimming, It provides output voltage of 0- 10V DC +/- 0.2V and 15mA per channel. For DALI output, it provides 12-20V DC and 160mA max for 32 DALI devices. An auxillary power output of 3.3VDC and 30mA. 0 - 100% dimming, device to device range 45m. Controller must control individually control standard DALI or Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50 deg celsius, surge protection 3kV. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Mobile Application shall have features of individual & group control for on/off/dimming/ colour tuneing / Scene Control / Animation etc. Device must have security key for commissioning and replacement for future. MAKE: PANASONIC/PHILIPS/BAJAJ/Crompton/WIPRO/HAVELLS/LT
21i-Sense BLE 5.2 AES 128 Bit encyption based wireless battery powered 5-button wall switch that controls ON/OFF, intensity and CCT of an individual or group of luminaires.Operates on 3V DC input voltage in an ambient temperature of 0 to 50 deg celsius and device to device range 45m. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ Crompton/ WIPRO/HAVELLS/LT
22SITC of 2W/mtr profile RGB NEON LED light with extruded Aluminium housing material, 12/24V in complete as per direction Eng-in-charge.Make-Leksa/Canara/ LT
23SITC of extruded black powder coated Aluminium housing 2W/ mtr step light with provision for LED strip with diffuser, provision for illuminated seat numbering on both sides, rubber grip, vertical screwing ,12/24V in complete as per direction Eng-in-charge.Make-Belight/Illumax/Equivalent
24SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
25Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
26Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1700 cmh air delivery with louvers of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C..(Make-USHA / /Havells/ ALmonard/ Crompton/Orient/Bajaj
27Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient wall FAN 600 MM Air Delivery Wall Fan Motor Speed: 1440 RPM Power Consumption: 180 W Blade Sweep Size: 600 mm Number of Speed Settings: 1 Material: Metal..Dominarie wall Fan complete with Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet complete as required and as per the Direction of Engineer-In-ChargeMake-USHA /Havells/ ALmonard/ Crompton/Orient/Bajaj
28LAND SCAPE LIGHT- Supply, installation, testing and comissioning of 4meter long decorative lighting pole with designer single arm bracket and supplied with 3000K ,50-60W LED Pendent Light of die cast aluminium body & clear acrylic diffuser having system lumen output >=120Lm/W protected with IP 65, SDCM≤3. Pole shall be made up of Mild Steel Body with decorative cast aluminium base of minimum 4000mm height and decorative bracket. Pole shall be coated with zinc rich primer & pure polyester powder coating of black with gold embellishment finish. Pole dia will be Ø88.9mm and having base Plate Ø230 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loop-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. The cost is inclusive of RCC foundation.(Make: K -lite Pelican mini Orna Bishop Series Pole KP-12016+KL-25138(Imperial).
29S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 63A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing MCB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 1 years of acceptance of materials
30Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials Make- POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster
31Providing and fixing 6SWG dia GI wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge.
32Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade Make- POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 4 core x 4 sq mm (for small power/LIGHT TO POLE)
33Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
34Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
35Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
36Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
37MAIN PANEL - S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.50X10MM Separate Aluminium Earth bus bar should be installed.Detailed GA drawing of the Panel, control wiring and power wiring drawing are to be submitted to SE Electrical Circle(R&B) before execution of the work. All the feeders shall have ON/OFF/TRIP indication.In commer-01 number of 400A 4P MCCB with ROM 36kA with LSIG Micro processor Release with Ics=100% Icu. (make- -LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB formula)with shunt trip.with axulary for BMS ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula (FROM Transformer) .Busbar- 04 numbers of 500Amps Aluminum busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) Out going- 1 numbers of 250A 4P MCCB,,25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula) 3 numbers of 100A 4P MCCB, 25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula) 3 numbers of 125A 4P MCCB, 25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula) 4 numbers of 63A 4P MCCB, 25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula)Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) Digital type multifunction meter for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data for all the incoming feeders.1 no. 3P+N 65kA type 1+2 SPD with 125A 4P MCCB, 25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula) Make-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB, All the outgoing MCCB feeders shall have provsion of digital ammeter with class 1 CT of suitable rating.
38HVAC PANEL :S/I/T&Commissioning of LT HVAC Outdoor DOUBLE DOOR panel made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder coat paint fallowed by 9 tank acid treatment process . Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.80X10MM Separate Aluminium Earth bus bar should be installed. Detailed GA drawing of the Panel, control wiring and power wiring drawing are to be submitted before execution of the work. All the feeders shall have ON/OFF/TRIP indication. In commer-01 number of 630 A 4P MCCB with ROM 36kA with LSIG Micro processor Release with Ics=100% Icu. (make- -LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB formula)with shunt trip.with axulary for BMS ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FormulaBusbar- 04 numbers of 800AmpsAluminum busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)Out going- 10 numbers of 63A 4P RCBO 300 MA ( Make-LEGRAND/ Siemens/ Schneider/ABB ) Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 1 set of digital type multifunction meter with CTs 630/5A 3 nos class 1 type(Make-ABB/Legrand/Schneider/Siemens) for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data. 1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCBMake-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB.
39FLOOR POWER and light PANEL : S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication.In commer- 01 no 125A 4P MCCB 25kA with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA)Busbar- 04 numbers of 200Amps Aluminum bus bar Electrolytic duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 06 nos 40-63A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of 0-200Amps Ammeter with CTs 200/5A 3 nos class 1 type(Make-Siemens/Schneider/ABB/Legrand).(DIGITAL)(Siemens/Schneider/ABB/Legrand)(iii) 01 set of 0-500 voltmeter .(DIGITAL)Siemens/Schneider/ABB/Legrand1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCBMake-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB
40STAGE PANEL:S/I/T&Commissioning of LT indoor floor mounted cubical type electrica panelmade out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication. Incomer:125 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 4 nos. 200 A copper Busbar duly sleeved Outgoing: 4 Nos 40A DP MCB. (10 KA) ,C series and 2 nos. 32A FP MCB , C series, 2 nos. 63A FP MCB , C series Instruments: 1 set.LED type phase indicating lamps with control fuses Complete duly factory wired as per SLD and panel should have proper earth by suitable rated Aluminium flat earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS as per the direction of Engineer-in-charge..MAKE OF MCCB- LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA .Make of MCBs- LEGRAND-DPX3/Siemens-Betaguard-Schneider-Acti-9/ABB SB200
41UPS Outgoing panel(1 no.) : S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication.In commer- 01 no 125A 4P MCCB 25kA with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula)Busbar- 04 numbers of 200Amps copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 03 nos 40- 63A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 02 no 63A 4P MCCB 16kA with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula)Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of 0-150Amps Ammeter with CTs 150/5A 3 nos class 1 type(Make-Siemens/Schneider/ABB/Legrand).(DIGITAL)(Siemens/Schneider/ABB/Legrand)(iii) 01 set of 0-500 voltmeter .(DIGITAL)Siemens/Schneider/ABB/Legrand1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCBMake-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB
4260 KVA UPS- Supply ,installation ,testing & commissioning of 60KVA UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 84AH, 60 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/APC/ Vertiv/) LOAD OF LIGHT , as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 2 years & complete test certificate must be submitted along with ups including component list & SLD.
43Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/Gloster/KEI/RR Kabel of following size cables as per direction of Engg.-in-Charge. 3.5 core x 300 sq mm Aluminium armoured Cable.
443.5 core x 185 sq mm Aluminium armoured Cable.(FOR HVAC / OTHER PANEL)
453.5 core x 50 sq mm Aluminium armoured Cable.(FOR FLOOR PANEL)
463 core 2.5 sqmm control copper armoured Cable (auditrioum light)
474 core 16 sqmm Aluminium armoured Cable External light)
48Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE property copper conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/Gloster/KEI/RR Kabel of following size cables as per direction of Engg.-in-Charge. 5 core x 10 sq mm COOPER armoured Cable
49Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
50Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
51Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
52Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
53Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable. 3.5 core x 300 sq mm brass double compression gland and aluminium lugs
543.5 core x 185 sq mm brass double compression gland and aluminium lugs
553.5 core x 50 sq mm brass double compression gland and aluminium lugs
565 core x 10 sq mm brass double compression gland and aluminium lugs
574 core x 16 sq mm brass double compression gland and aluminium lugs
58Supply,Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling only, having all hermetically sealed inverter type Scroll Compressor(s) microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. The unit shall deliver the rated capacity at AHRI Conditions and work even at 49°C ambient temperature without tripping. The unit shall be suitable to work on 380-415 V, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads.The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation, auto address setting, automatic refrigerant charging,blue fin treated condensor coil for corrosion resistant, auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc. .The Unit should have free phase technology so that unit can work in case of phase reversal also without tripping of units.ISEER should be greater than equal to 7.4 for cooling capacity less than 40kWr, ISEER should be greater than equal to 7.5 for cooling capacity more than equal to 40kWr and less than 70kWr and ISEER should be greater than equal to 7.6 for cooling capacity more than equal to 70kWr.The deration chart of outdoor from factory head should be submitted before procurement.Make: Mitshubishi/ TRANE/O-GENERAL/Daikin16 HP
59SITC of ODU Connecting Kit with other accessories as per the direction of Engineer-in-charge. Make: Mitshubishi/ TRANE/O-GENERAL/Daikin
60SITC of AHU connecting kit with other accessories as per the direction of Engineer-in-charge. Make: Mitshubishi/ TRANE/O-GENERAL/Daikin
61Supply, Installation,Testing and Commissioning of following minimu capacity 4-way/ VRV Cassette Type Indoor ceiling mounted unit equipped with cord less remotes & refnets , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation, necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. Make: Mitshubishi/ TRANE/O-GENERAL/Diakin 2.0 TR
62Supply, Installation,Testing and Commissioning of following minimu capacity Ductable Type Indoor ceiling mounted unit equipped with cord less remote & refnets, synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation, necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. Make: Mitshubishi/ TRANE/O-GENERAL/Diakin 7.1 TR
63Coil Section: Cooling coil of 6 row copper tube. The coil shall be EUOROVENT certified as per EN 1216. The header shall be made of copper and the end caps of MS. The tube shall be of copper and shall be 0.4 mm thick and 12.5 mm diameter. The fins shall be of aluminium of 0.11 mm thickness with spacing of 10-11 FPI and shall be coated with anticorrosive hydrophilic blue colour coating. The coil shall be minimum 6 row deep or shall be designed as per the load requirement and the area shall be selected for a maximum face velocity of 2.5 m/s. (Selection sheets need to be provided for approval) Fan Section: Eurovent certified direct driven aerofoil design blade plug fans of high efficiency as per EN 5801. The fan shall be selected for an outlet velocity of not more than 9 m/s. The fan should be selected to ensure that it operates within the optimum range when the speed of fan shalll be 40% to 150% of motor RPM. For capacities till 9000 cfm single fan can be used. For capacities between 9000 cfm to 14000 cfm single / two fans can be used. However for capacities above 14000 cfm, multiple fans to be used.Motor Section: The AHU shall be provided with AC motors of high efficiency. Motor shall be 415±10% volts, single / three phase as suiting the airflow range, TEFC, with class F insulation with IP 55 protection for AC Motors. Motors shall be specially designed for quiet operation. The motor should be variable speed type & driven by VFD for AC motors.Motor Winding shall be VPI coated.Drain Assembly: 20G SS 304 drain pan to be installed strictly inside the AHU. Drain pan installation outside the PU panel casing is not allowed. Air moving capacity, cooling capacity and external static pressure ESP) excluding pressure drop across filter, coil and fan sections shall be according to the enclosed AHU details.The rate is inclusive of VFD panel.IP 20 rated VFD to be placed inside the starter panel with IP-55 enclosure.Each VFD panel to be provided with digital display showing electrical parameters like voltage, current and power consumption.At the time of odering ahu total pressure loss as per friction method and ahu coil selection should be submitted for approval. Make- VTS/Trane/Systemair36TR 12500 CFM 6RD, ESP-80MM, FM AHU
6412TR 4800 CFM 6RD, ESP-40MM, FM AHU
65Supply & Installation of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 25mm thick closed cell electrometric Nitrile rubber tubular Class O fire rated insulation conforming to BS476 Part6 and part 7 between each set of indoor & outdoor units . The pipe dia upto 25 shall be soft seamless & above 25mm dia shall be hard seamless . All piping inside the room shall be properly fixed/supported with suitable size of clamp/ M.S. hanger and all external piping shall run in GI. cable tray etc. as reqd. Make of insulation-K Flex/Armacell/Vidoflex/Eurobatex/Isoline Make of pipe-Rajco/Mandev/Maxflow 19.1 mm with 0.8 mm thick
6612.7 mm with 0.8 mm thick
6715.9 mm with 1.00 mm thick
689.5 mm with 0.8 mm thick
69Supply & Installation of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 25mm thick closed cell electrometric Nitrile rubber tubular Class O fire rated insulation conforming to BS476 Part6 and part 7 between each set of indoor & outdoor units . All external piping(which are exposed to external environment such as terrace etc.) shall be provided with factory laminated GC Cloth & then shall run in unperporated hot dip galvanized GI. cable tray with cover etc. as reqd. Make of insulation-K Flex/Armacell/Vidoflex/Eurobatex/Isoline Make of pipe-Rajco/Mandev/Maxflow 41.3 mm with 1.43 mm thick
7028.6 mm with 1.00 mm thick
7115.9 mm with 1.00 mm thick
7219.1 mm with 0.8 mm thick
73Drain Piping- Providing & fixing of PVC Pipe complete with fittings, supports as per specifications and duly insulated with 9 mm thickness Class O of closed cell nitrile rubber/XLPE as per direction of Engineer-in-charge & specifications enclosed as reqd.
7440 MM dia
7532 mm dia
76Control & Transmission Wiring- Providing & fixing control cum transmission wiring of 2 core x 1.0 sqmm shielded copper cable in HMS FRLS PVC conduits between indoor and out door unit. Make of cable - Finolex/Polycab/HAVELLS/Gloster/KEI/RR Kabel Make of conduit- AKG/BEC/Precision/Norpak/Anchor/Kinjal
77Gas Charging for the entire circuit(R410A)
78Supply & Fixing of Cooled Air Distribution Duting fabricated with Class VI GI Sheet(180 GSM) Complete With Supports, dampers, guiding vanes, access doors, MS Angle, Fire inhibiting gaskets, Nuts, bolts and all oyher accessories in accordance with approved drawing and the Specification. (Make:- Jindal/ Sail/ Tata)22 GAUGE
7924 Gauge
80Supply,installation,testing and commissioning of duct thermal insulation of Following Capacities , Make of insulation-K Flex/Armacell/Vidoflex/Eurobatex/Isoline . - with 25mm thick Nitrile Rubber Class O fire rated Insulation insulation conforming to BS476 Part6 and part 7 to provide the sufficient mechanical protection. The fibre glasscloth shall be factory laminated. The adhesive shall be SR 98 or equivalent sourced from OEM of nitrile rubber insulation.
81Supply ,& Fixing of Accoustic Class O fire rated Insulation insulation conforming to BS476 Part6 and part 7 15 mm thick of Armasound open cell nitrile rubber Make of insulation-K Flex/Armacell/Vidoflex/Eurobatex/Isoline
82Supply ,& Fixing of Flexible WATERPROOF FIRE RATED canvas connection in complete as per the direction of Engineer-in-charge.
83Supply, erection, testing & commissioning of Aluminium powder coated grills/diffuser with VCD having flange all around.Make-Glenstorm/Airflow/Systemaire
84Supply, erection, testing & commissioning of Aluminium powder coated grills/diffuser without VCD having flange all around.Make-Glenstorm/Airflow/Systemaire
85Supplying,fixing of hot dip galvanized GI unperforated cable trays with cover having horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 450mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
86SITC of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., Make-systemair/ventech/Air master/Ruskin Titus
87SITC of Fusible link mechanical fire damper complete with sleeve for fixing on retrun air opening.The damper shall be spring loaded and suitable for reset to original position.The damper also be provided with limit switch for transferring the signal to AHU starter panel/BMS for tripping the AHU in case of fire .The rate shall be inclusive of control wiring upto the Starter panel/DDC clopsing the opening surrounded by the sleeve with fire glass and fire sealant as per standards Fire Damper.Make-systemair/ventech/Air master/Ruskin Titus
88Supplying, Fixing, testing and commissioning of Motorized fire dampers of minimum 120 minutes fire rated as per UL-555 and UL 555S,leakage class-1 in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized operated by AC/DC Actuator and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal and, in confirmation to IS and as per specifications complete etc. as required. The damper housing of Galvanised Steel sheet construction, 16G GI casing and 16G GI Blades with chrome plated spindle, self lubricating bushes. The damper blade should be Heavy duty interlocking blades and fully enclosed blade linkage mechanism. (Make: Air Flow/ Systemair/ Dynacraft/Greenheck)Fire damper(150 mm deep)
89Supply, installation, testing and commissioning of an electric spring-return actuator comply with UL 555 and UL 555S for fire and smoke dampers,UL listed, rated for 2-position (On/Off) control. The actuator shall be factory-fitted with an internal spring to ensure automatic closure upon power loss. It must include dual auxiliary switches for status monitoring (Open/Closed), a thermoelectric tripping device (72°C), and be rated for elevated temperatures (up to 350°F / 177°C). Operating Voltage 24V DC/ 230V AC. Complete with all necessary linkages, mounting brackets, and control wiring as per approved technical specifications. Torque rating as per final damper size with in 3Nm to 20Nm.The rate is inclusive of control panel and temperature response device and its wiring. (Make:- Belimo/ Siemens/ Danfoss)
90For smoke exhaust: SITC of Tube/vane/inline-axial direct driven Smoke exhaust fan as per BS EN 12101-3 complete with cast aluminium impeller and all standard accessories like drive motor suitable for handling hot gas of temperature 400 Deg C for 2 hours, motorized isolating damper at fan inlet, rain protection cowl with bird screen/back draft damper at fan discharge, supports and supporting structures, for 4 point clamping with Vibration spring isolater and Motorized damper shall be rated for 240 V, 50 Hz, 1 Ph., AC supply.The Motor shall be of TEFC, IP-55 protection, Class 'H' insulation, motor shall be of IE-3 efficiency, suitable for 3 Phase, 415volts, 50hz power supply.Fan Shall be Oprating in Dual Mode in Normal Ventilation & another in Fire ModeFan Make - Krugger/Nikotra/Systemair/Greenheck/humidin/Airflow/ELTA 11,000 CFM @ 25mm MMWG static pressure
91Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, wall mounted control panels including anchoring into the wall, wiring and earthing terminating into MPCB in each panel shall be provided by the electrical contractor.All outgoing shall be provided with Stop / Manual /Auto selector switch to facilitate operation through BMS. All starters shall be provided with potential free Contact for Connections to Building Automation System.Over-load relay, suitable for motor duty and able to withstand fault level of suitable KA rating.single phase preventer (Electronics type) as per the ratings given below.Terminal block for power distribution.Power Contactor.Phase indicating lights and indicating light for ON/OFF/TRIP status phase sequence relay shall also be provided.Time delay relay for delayed automatic restart of motor (0-180 sec).Integration with fire alarm detection system and fire damper for starting / stopping the fan (in case of fire) / Power supply for damper control panel.For on/off/remote and local operation, 3 pole single throw switch shall be provided in each panel to facilitate override of the automatic operation.All starters shall be provided with suitable potential free contract for connections to the Building Automation System.The number of control panels shall be as follows.Make (Switchgear) - ( MCCB : Make-Legrand-(DPX3)/Schneider-(CVS)/Siemens-(3VA) /ABB (Formula), MCB : Make-Legrand-(DX3)/Schneider-(Acti9)/Siemens-(betagard)/ ABB (SB200)Make of VFD-Siemens/Schneider/ABB16/25/32/63A 4P MPCB with 5/10/15 HP Three phase VFD with bypass star delta/DOL starter with overload relay and single phase preventer . Each of these compartment shall contain indicating lamp with ON/ OFF/ TRIP status for fan sections/axial fans.The price is inclusive fire control relay module.
92SITC of 43\\" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: LG/Samsung/Sony
93SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit.
94SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax, Legrand, Panduit
95SITC of Cat6 I/O with Single Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax, Legrand, Panduit
96SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax, Legrand, Panduit
97SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax, Legrand, Panduit(1 mtr length)
98SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax, Legrand, Panduit(2 mtr length)
99SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Systimax, Legrand, Panduit
100SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core . Make: Systimax, Legrand, Panduit
101SITC of OFC Patch Cor, SM (OS2), Duplex LC-SC, LC-LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db. Make: Systimax, Legrand, Panduit
102SITC of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco, Digisol, Netgear
103SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol, Cisco, HP, Netgear
104SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand
105SITC of 42U 600/650D UL Listed Floor mount Rack with Front perforated door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make:Valrack, Rittal, Legrand
106Supplying and fixing of following sizes of heavy class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/BEC/Precision/Norpak - 20 MM
10725 MM
108Supply and installation of Dual band 802.11ax WiFi6 Dual Band Access Point. Complying PoE+ for power, with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Cisco/Digisol/Netgear
109AV SYSTEM- ACTICE LED VIDEO WALL- SITC of Active LED Wall Indoor of Pixel Pitch : 2.5 mm or better Minimum Size: : 10.80 Mtr x 3.7125 Mtr,. ,with predefined resolution according to pixel pitch (4320*1485 or more ). Includes: LED Cabinets, 4K LED Controller. Pixel Density per sqm i.e. 1,60,000 or better, Viewing Angle 160 / 160 or better, Refresh Rate 3840 Hz or more , Brightness(Typ.) 800 nits or more, Power Consumption (Max/Avg W/Cabinet)-135 W/Cabinet /65 W/Cabinet, Lifetime 1,00,000 hours or more, Contrast TYP 8,000:1 or more , with 2 years warranty , 4K LED Controller with 4x HDMI inputs, 4xDVI inputs, 4x3G-SDI Inputs, 2xDP 1.1 Input, 1xDP 1.2 Input, 1xHDMI 2.0 output, 16xRJ 45 + 2xFiber Outputs, 4xDVI Output, 4xHDMI Output having Seamless switching & scaling, fadein/fade out, Picture in Picture (PIP2) facility, Content Monitoring Support .15 Years presence in India, Valid BIS certificate to be provided for the offered LED tiles/cabinets before the supply of goods. MS/Steel Extrusion should be used to for the structure to mount the LED walls to ensure precision installation. Brackets to fasten the MS/Steel extrusion to be made of MS with powder coating. BIS certificate for module shall not be considered as valid BIS certificate for the product. The offered model should be clearly mentioned in the BIS certificate. LED CONTROLLER BIS ALSO REQUIRED . Warranty on the product shall be 5 years. Make: Barco, Christie, Delta,LG,Panasonic
110ACTICE LED VIDEO WALL-SITC of Fine Pitch LED Display based Indoor wall 1.40 mm Pixel Pitch based Indoor Fine Pitch LED Wall Screen of Size (Diagonal) :120 Inch or Higher, Technology: LED with Coating on Surface (COS), Aspect Ratio:16:9, Resolution: 1920×1080, Pixel Pitch (mm): P1.38, Display Area (L×H):2664×1498.4mm, Maintenance Mode: Front Access, Installation mode Mobile: Wall mounting, Brightness(Type):800 cd/sq.mtr (Adjustable), Contrast: 10000:1, Viewing Angle : Horizontal 160degree, Vertical 160 degree, LED Lifespan: ≥100,000 hrs, Operation voltage: 100-240 V AC,50/60 Hz, Standby Power : ≤ 0.5W, Operating System : Android 13.0 or latest., CPU: Minimum Octacore (Four Cortex-A76 + Four Cortex- A55), RAM: Minimum 8 GB, Storage: Minimum 64GB, Support Media Format: Support Mainstream video format such as MPEG-1,MPEG-2,MPEG-4, H.263, H.264, H.265, VC-1, VP9,VP8,MCV,AV1; Support audio format Such as MP3, Support JPG,JPEG,BMP,PNG,HIF and other image format. I/O Ports: HDMI IN ×4, HDMI OUT ×1, USB 2.0 IN ×1, USB 3.0 IN ×3, USB Type C IN×1, Audio Output (3.5 mm Jack) ×2, Audio Input(3.5 mm Jack)×1, Control-RS232(RJ45), Wi-Fi- yes, Dual Band, Bluetooth-Yes, Built in,USB Type B Out × 1,Ethernet-2 ×RJ45(10/100/1000M). I/O Interface: HDMI IN ×2, HDMI OUT ×1,USB 3.0 ×2,1000M RJ45 ×1, PC Interface × 40 pin. Accessories : Remote Control × 1,Front Maintenance Tool × 1, Installation Tool Kit × 1, Wall mounting Bar × 1.Warranty on the product shall be 5 years. Make:Barco, Christie, Delta,LG,Panasonic
111SITC of 4K @60fps PTZ Camera with minimum 30X Optical Zoom & FoV of minimum 68 deg , min 255 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver. Camera can be controlled and managed through centralised software on network. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. Make: Lumens, Panasonic, Sony, Vaddio
112SITC of Recording, Streaming & Webcasting Hardware simultaneously, Built-in 4x HDMI & IP Inputs with 4x Line Inputs, 2x HDMI Outputs. The system should be capable to record upto any four inputs simultaneously in a single frame and as well as individual sources simultaneously. Should have minimum 1TB inbuilt storage and can be connected to local NAS storage. The system should be able to support minimum 3 unicast streams.The recorded files should have the option of time and date stamp.The device can be controlled and managed through centralised software on network .Quoted model should be CE, FCC & RoHS Certified with Test Lab Reports. Make: Lumens, Mediapointe, Mediasite, Vbrick
113SITC of AVoIP Decoder supporting 4K @60fps with simultaneous outputs through HDMI 2.0, USB Type C & USB Type A with Line Out & 3.5 mm, 1x Line In & 3.5 mm. The decoder should be capable to convert IP to USB 3.0. The decoder should support Video Decoding Formats of H.264/HEVC with in-built AES128 encryption and NDI HX3 / NDI HX2 / RTSP, PoE+Make: Lumens, Crestron, Extron, Newtek
114SITC of AVoIP Encoder supporting Full HD @60 fps, should have 1 x HDMI Input & Output with USB Type C.Encoder should have a tally light which indicates that the camera is live, while the IP signal is transmitted to decoders, computers or streaming platforms. Encoder should have feature of a pass thru HDMI output. Encoder should support NDI HX3 with Low Latency & High Quality Video Distribution.Make: Lumens, Crestron, Extron, Newtek
115SITC of remote control panel/ wall plate to control the live streaming, recording, and video file saving options. The panel should provide three macro functions that can remotely switch the scene and control the camera preset. The panel can be extended to 30 meters through a Cat 5e cable. It can be mounted on walls and furniture. Equipped with a USB port to record or backup video files and can be integrted with Media Processor. Make: Lumens, Crestron, Extron
116SITC of Joystick with 3\\" LCD for Preview Monitoring, PAN/Tilt/Zoom Control, Communication via IP & RS232C/RS455 Interfaces, Auto Backlit Keys, Should be able to control minimum 200 Cameras on IP & 10 Cameras through RS232/422, Should support VISCA, VISCA Over IP protocols & PoE. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. Make: Lumens, Panasonic, Sony, Vaddio
117SITC of Camera wall/ceiling mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on camera configuration and requirment. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes.
118Auditorium Audio Solution- Left & Right Line Array: SITC OF LEFT LINE ARRAY CLUSTER: THE CLUSTER SHOULD PROVIDE A MINIMUM HORIZONTAL DISPERSION ANGLE OF 85 DEGREES AND A VERTICAL ANGLE OF 40 DEGREES AND BE CAPABLE OF DELIVERING A SPL OF 105dB CONTINOUS PINK NOISE AT A DISTANCE OF 50-FT WITH A MINIMUM FREQUENCY RESPONSE OF 65HZ TO 19KHZ WHICH IS IDENTICAL ON BOTH SIDES OF THE CLUSTER. THE CLUSTER SHOULD BE COMPOSED OF MINIMUM 4 NOS DUAL 8\\" LINE ARRAY ELEMENTS EACH HAVING POWER HANDLING OF 500 WATTS AES, SENSITIVITY OF 97dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE. THE ENCLOSURE SHOULD BE MADE OF EUROPEAN BIRCH PLYWOOD. ALL METAL PARTS SHOULD BE POWER COATED OR STAINELESS STEEL. THE COMPLETE UNIT SHOULD BE BLACK IN COLOUR. Make: L-Acoustic/ Martin Audio/Bose
119SITC of A FLYING ARRANGEMENT OF THE LEFT & RIGHT FLYING ARRAY CLUSTER ALONG WITH MOUNTING ARRANGEMENT FOR EACH LINE ARRAY ELEMENT HAVING TILTING FACILITY OF 10 DEGREES IN ONE DEGREE STEPS. THE COMBINED CLUSTER SHOULD HOUSE 4 LINE ARRAY ELEMENTS. THE HARDWARE SHOULD BE STAINLESS STEEL OR POWDER COATED.Make: L-Acoustic/ Martin Audio/Bose
120CENTRE SCREEN SPEAKER: SITC OF CENTRE SCREEN SPEAKER THAT SHOULD PROVIDE A CONICAL DISPERSION ANGLE OF 90 DEGREES AND BE CAPABLE OF DELIVERING A SPL OF 105dB CONTINOUS PINK NOISE AT A DISTANCE OF 35-FT WITH A MINIMUM FREQUENCY RESPONSE OF 65HZ TO 20KHZ WHICH IS SYMMETRICAL IN ALL DIRECTIONS OF THE SPEAKER. THE SPEAKER SHOULD BE COMPOSED OF MINIMUM 15\\" LOW FREQUENCY DRIVERS AND A COAXIALLY MOUNTED COMPRESSION DRIVER HAVING POWER HANDLING OF 500 WATTS AES, SENSITIVITY OF 98dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE. THE ENCLOSURE SHOULD BE MADE OF EUROPEAN BIRCH PLYWOOD. ALL METAL PARTS SHOULD BE POWER COATED OR STAINELESS STEEL. THE COMPLETE UNIT SHOULD BE BLACK IN COLOUR AND COMPLETE ALONG WITH WALL OR CEILING MOUNT ARRANGEMENTS AND HARDWARE. Make: L-Acoustic/ Martin Audio/Bose
121FLOOR MOUNT SUBWOOFER: SITC OF COMBINED SUBWOOFER SYSTEM SHOULD BE CAPABLE OF DELIVERING A SPL OF 115dB CONTINOUS BAND LIMITED PINK NOISE AT A DISTANCE OF 50FT WITH A FREQUENCY RESPONSE OF 35HZ TO 200HZ. EACH SUBWOOFER UNIT SHOULD BE COMPOSED OF MINIMUM DUAL 18\\" SUB WOOFER ELEMENTS EACH HAVING POWER HANDLING OF 2000 WATTS AES EACH, SENSITIVITY OF 101dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE. THE ENCLOSURE SHOULD BE MADE OF EUROPEAN BIRCH PLYWOOD. ALL METAL PARTS SHOULD BE POWER COATED OR STAINELESS STEEL. THE COMPLETE UNIT SHOULD BE BLACK IN COLOUR. Make: L-Acoustic/ Martin Audio/Bose
122STAGE MONITOR: SITC of STAGE MONITOR SPEAKER SHOULD BE COAXIAL AND PROVIDE A DISPERSION ANGLE OF 60 DEGREES CONICAL AND BE CAPABLE OF DELIVERING A SPL OF 105dB CONTINOUS PINK NOISE AT A DISTANCE OF 15FT WITH A FREQUENCY RESPONSE OF 55HZ TO 20KHZ. THE SPEAKER SHOULD BE COMPOSED OF MINIMUM 12\\" DRIVER EACH HAVING POWER HANDLING OF 250 WATTS AES, SENSITIVITY OF 98dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE. THE ENCLOSURE SHOULD BE MADE OF EUROPEAN BIRCH PLYWOOD. ALL METAL PARTS SHOULD BE POWER COATED OR STAINELESS STEEL. Make: L-Acoustic/ Martin Audio/Bose
123SURROUND SPEAKERS: SITC OF SPEAKER SHOULD BE POINT SOURCE COAXIAL AND PROVIDE A DISPERSION ANGLE OF 90 DEGREES CONICAL AND EACH ARRAY SHOULD BE CAPABLE OF DELIVERING A SPL OF 102dB CONTINOUS PINK NOISE AT A DISTANCE OF 35FT WITH A FREQUENCY RESPONSE OF 65HZ TO 20KHZ. THE SPEAKER SHOULD BE COMPOSED OF MINIMUM 10\\" DRIVER EACH HAVING POWER HANDLING OF 150 WATTS AES, SENSITIVITY OF 96dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE. METAL PARTS SHOULD BE POWER COATED OR STAINELESS STEEL. Make: L-Acoustic/ Martin Audio/Bose
124CEILING SURROUND SPEAKERS: SITC of SPEAKER SHOULD BE POINT SOURCE AND PROVIDE A DISPERSION ANGLE OF 90 DEGREES CONICAL AND EACH SHOULD BE CAPABLE OF DELIVERING A SPL OF 102dB CONTINOUS PINK NOISE AT A DISTANCE OF 20FT WITH A FREQUENCY RESPONSE OF 100HZ TO 20KHZ. THE SPEAKER SHOULD BE COMPOSED OF MINIMUM 12\\" DRIVER EACH HAVING POWER HANDLING OF 250 WATTS AES, SENSITIVITY OF 102dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE. METAL PARTS SHOULD BE POWER COATED OR STAINELESS STEEL. THE SPEAKER SHOULD BE DESIGNED FOR CEILING MOUNTING AND SHOULD BE COMPLETE WITH CEILING MOUNTING BRACKET AND PROVISION FOR FIXING SAFETY CABLES.Make: L-Acoustic/ Martin Audio/Bose
125SITC of 16 INPUT 16 OUTPUT DIGITAL SPEAKER MANAGEMENT SYSTEM HAVING SAMPLING RATE 48KHz OR HIGHER, 8TH ORDER FILTERS, FEEDBACK SUPRESSOR, AUTO MIX AND MATRIX MIX, 31 BAND GEQ PER INPUT AND 10 PARAMETRIC EQUALIZER PER OUTPUT, DELAY & LEVEL SETTINGS, COMPRESSOR AND LIMITER FOR ALL CHANNELS; ALL BALANCED INPUTS AND OUTPUTS, MICROPHONE INPUTS WITH PHANTOM POWER; NETWORK OPERATION. Make: L-Acoustic/ Martin Audio/Bose/ Xilica
126Amplifier: SITC of 3 CHANNEL POWER AMPLIFIERS. EACH AMPLIFIER SHOULD DELIVER MINIMUM POWER 200 WATTS PER CHANNEL @ 8 OHMS, 300 WATTS PER CHANNEL @ 4 OHMS . FREQUENCY RESPONSE SHOULD BE 30HZ TO 20KHZ +- 0.2 dB. DAMPING FACTOR GREATER THAN OR EQUAL TO 100 AND MINIMUM SIGNAL TO NOISE RATIO OF 95dB. Make: L-Acoustic/ Martin Audio/Bose
127Amplifier: SITC OF 4 CHANNEL POWER AMPLIFIERS. EACH AMPLIFIER SHOULD DELIVER MINIMUM POWER 480 WATTS PER CHANNEL @ 8 OHMS, 800 WATTS PER CHANNEL @ 4 OHMS AND 2 x 1800 WATTS IN BRIDGE MODE @ 8 OHMS. FREQUENCY RESPONSE SHOULD BE 20HZ TO 20KHZ +- 0.5 dB. DAMPING FACTOR GREATER THAN OR EQUAL TO 300 AND MINIMUM SIGNAL TO NOISE RATIO OF 110dB. IF 2 CHANNEL MODELS ARE USE, THE POWER OF EACH CHANNEL SHOULD BE EQUAL TO THE POWER IN BRIDGE MODE OF 2 CHANNELS - IF 2 CHANNEL AMPLIFIERS ARE USED, QUANTITY WILL BE DOUBLE. Make: L-Acoustic/ Martin Audio/Bose
128MONITOR SPEAKERS: SITC OF SPEAKER SHOULD BE COAXIAL AND PROVIDE A DISPERSION ANGLE OF 90 DEGREES CONICAL AND BE CAPABLE OF DELIVERING A SPL OF 105dB CONTINOUS PINK NOISE AT A DISTANCE OF 15FT WITH A FREQUENCY RESPONSE OF 65HZ TO 20KHZ. THE SPEAKER SHOULD BE COMPOSED OF MINIMUM 10\\" DRIVER, HAVING POWER HANDLING OF 150 WATTS AES, SENSITIVITY OF 96dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE AND BE COMPLETE ALONG WITH WALL MOUNTING BRACKET AND HARDWARE. Make: L-Acoustic/ Martin Audio/Bose
129GREEN ROOM MONITOR SPEAKERS: SITC OF SPEAKER SHOULD BE COAXIAL AND PROVIDE A DISPERSION ANGLE OF 90 DEGREES CONICAL AND BE CAPABLE OF DELIVERING A SPL OF 105dB CONTINOUS PINK NOISE AT A DISTANCE OF 10FT WITH A FREQUENCY RESPONSE OF 70HZ TO 20KHZ. THE SPEAKER SHOULD BE COMPOSED OF MINIMUM 8\\" DRIVER, HAVING POWER HANDLING OF 120 WATTS AES, SENSITIVITY OF 93dB @ 1 WATT 1 METRE OR HIGHER. THE SPEAKERS SHOULD BE COURSE TEXTURE AND BE COMPLETE ALONG WITH WALL MOUNTING BRACKET AND HARDWARE.Make: L-Acoustic/ Martin Audio/Bose
130Cinema Processor: SITC of Cinema audio processor with touchscreen front panel interface for easy control. Easily integrates with multichannel Amplifier. Web user interface for remote configuration and control. Atmos designer compatibility for setup and precise system calibration. Internal crossovers to enhance audio quality. High resolution multi-rate EQ. Audio processing features: surround 7.1 and 5.1 playback, TrueHD Audio, supported sample rates of 44.1 KHz, 48KHz and 96 KHz at 16, 20 and 24 bit or better. Alternative content surround processing. Make: Dolby, QSC, Marantz
131AV Receiver: SITC of AV Receiver with Number of Powered Channels 7 or more. Power Output 100W or more. Amplifier Topology Class A/B. DTS HD Master, DTS:X, DTS Neural:X, DTS Virtual:X. Dolby TrueHD, Dolby Atmos, Dolby Atmos Height Virtualization, Dolby Atmos Music, Dolby Surround. Max Number of Processing (Preamp) Channels 7.1 or more. HDMI Inputs 8 numbers or more. Connectivity: Ethernet Ports, Wi-Fi, Bluetooth. Make: Marantz, Denon, Yamaha
132Mixer: SITC of 48 Input Channels Digital Mixer with 24 Local Mic Inputs (XLR), 2 ¼” Stereo Inputs (TRS), 1 3.5mm Stereo Input, 36 Total Busses, 12 Stereo Mix (Aux or Group) + Main, AES Digital Output, I/O Port for Option Card (including 3rd party protocols –Dante/Waves), 7\\" colour touchscreen, 32+1 Faders with 6 Layers for 192 assignable Channel Strips, 32 Backlit LCD Channel Strip displays, SQ-Drive for stereo and multitrack recording/playback direct to USB drive, USB transfer of Scenes, Libraries, Shows, 32x32 channel USB streaming to/from Mac/PC. Make: Yamaha, Allen & Health, Behringer
133Wireless Handheld Microphone: Supply of Digital wireless handheld Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz Bandwidth will allow for up to 90 channels Up to 2,200 or more selectable frequencies with Mobile App integration setup 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern cardioid, Sound pressure level 154 dB SPL, Transmit power : 10 mW. Make: Sennheiser, Clock Audio, Rode
134Wireless Lapel Microphone: SITC of Digital wireless lavalier Microphone with reliability and scalability of 50 MHz or more Bandwidth will allow for up to 80 channels Up to 2000 or more selectable frequencies with Mobile App integration setup 130 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern omnidirectional, Sound pressure level 128 dB SPL or more, Transmit power : 10 mW. Make: Sennheiser, Clock Audio, Rode
135SITC of active antenna splitter 2 x 1:4 or 1 x 1:8, Digital transmission operating in the UHF spectrum , Auto scan features, 130 dB or better audio input dynamic range , 50 MHz or more of tuning bandwidth and provision up to 80 channels, 2000 or more selectable frequencies. Make: Sennheiser, Clock Audio, Rode
136SITC of digital directional antenna with Impedance:50 Ohm; Connector: BNC; Pick-up pattern: directional;Frequency range: 470 - 1075 MHz or better;Antenna gain: 5 dBi or better; Bidder Shall Submitted OEM Authorizationalong with technical bid . Make: Sennheiser, Clock Audio, Rode
137SITC ANTENNA BOOSTER with 50 MHz or more of tuning bandwidth and provision up to 80 channels, 2000 or more selectable frequencies. Makes: Sennheiser, Clock Audio, Rode
138SITC of super-cardioid pre-polarized condenser instrument microphone with frequency response of 40 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better , Maximum SPL of 139 dB at 1 kHz. Nominal impedance of 50 Ohm or better, with a min. terminating impedance of 1 kOhm or better. Bidder Shall Submitted OEM Authorizationalong with technical bid . Make: Sennheiser, Clock Audio, Rode
139SITC of dynamic cardioid vocal microphone with frequency response of 40 Hz – 16,000 Hz or better and the sensitivity of 2.7 mV/Pa at 1 kHz or better, nominal impedance of 350 Ohm or better, with a min. terminating impedance of 1 k Ohm. Bidder Shall Submitted OEM Authorizationalong with technical bid Make: Sennheiser, Clock Audio, Rode
140SITC of microphone set consisting of steel drum case; 1 nos dynamic cardioid microphone with an integral stand mount, fitted with a hum compensating coil for low frequency instruments with frequency response of 20 Hz – 16,000 Hz or better and the sensitivity (free field, no load) of 0.25 mV/Pa at 1 kHz or better and 0.9 mV/Pa at 50 Hz or better, nominal impedance of 350 Ω or better, with a min. terminating impedance of 1 kΩ; 4 nos dynamic cardioid instrument microphone for drums and percussion as well as brass and woodwind instruments featuring an integral stand mount and hum compensating coil with frequency response of 40 Hz – 18,000 Hz or better and the sensitivity (free field, no load) of 1.8 mV/ Pa at 1 kHz or better. nominal impedance of 350 Ω or better, with a min. terminating impedance of 1 kΩ or better; 2 nos super-cardioid pre-polarized condenser instrument microphone with frequency response of 40 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better, Maximum SPL of 139 dB at 1 kHz or better. Nominal impedance of 50 Ohm or better, with a min. terminating impedance of 1 kOhm or better. Make: Sennheiser, Clock Audio, Rode
141SITC of Digital Wireless Tablestand compatibility with all XLR-3 gooseneck microphones; Dynamic Range: > 120 dB (A) or better; SNR: > 88 dB(A) or better; RF Sensitivity: < -90 dBm or better; THD: 0.1% or better; Frequency Response: 85 Hz to 20KHz; ; Power Consumption: 380 mA or less; Battery Operating Time: 8h or more. Make: Sennheiser, Shure, Revolab.
142SITC of pre-polarizedgooseneck microphone 450mm with frequency response of 50 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better , it shall offer radio frequency interference shielding against intermodulation from wireless equipment and devices Maximum SPL of 139 dB at 1 kHz. Nominal impedance of 100 Ohm or better, with a min. terminating impedance of 1 kOhm or better. Bidder Shall Submitted OEM Authorizationalong with technical bid Make: Sennheiser, Clock Audio, Rode
143SITC of Four channel receiver for Digital Wireless Microphone, The device can be operated with a single network cable; Automatic Gain Control; Automatic Frequency management; AES 256 encryption; Latency 25 ms or less, Minimum 2-port Dante, PoE, Analog Mix OutputMake: Sennheiser,Shure, Revolab.
144SITC of wireless microphone charging dock station from the same make as microphone
145SITC of AV over IP Encoder/decoder that transports 4096x2160 @ 60Hz 4:4:4, HDR10, Dolby vision video & deep color video support video over standard ethernet switch. Having video 2 x HDMI & 2x USB-C (Audio/Video/USB support) Input while in encoder mode and Output 1 x RJ45 & 1x SFP port output for connecting to decoder directly or to network switch for creating matrix switching & 1x HDMI Loopout. Having video 1x RJ45 & SFP port Input while decoder mode, 2 x HDMI & 2x USB-C local input and 1 x HDMI scaled output which also support widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing up to 8 wide x 8 high, in decoder mode. Should support audio Formats Dolby Digital®, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, LPCM up to 8 channels. Audio on 1x stereo line-level audio input/output. Should have ethernet port supporting TCP/IP, UDP/IP, SFTP, DHCP, SSL, IPv4. Onboard control ports of minimum 1 x IR, 1 RS-232 for controlling third party devices, without the need to running control cable from control system 2 x USB 2.0 port for connecting USB mouse, keyboard, camera, or other USB 2.0 device & USB HID compliant device. Should support Image preview on the control touch screen, which shows the current video being received by an input of a encoder or displayed by an output of a decoder. Should suppot AES67 Audio Embedding and De-embedding. Should support enterprise-grade security including Active Directory® credential management, 802.1X authentication, AES-128 content encryption, PKI authentication, TLS, SSH, and HTTPS. And HDCP 2.3 compliant. Should comply to CE, IC, FCC. Make: Crestron, AMX, Extron
146SITC of AV over IP decoder with built in scaler that transports 4K@60Hz 4:2:0 video over standard Ethernet switch. Having video support 1 x RJ45 Input and Output 1 x HDMI . Audio on 1x Analog Formats Stereo. Should support AES67/Dante feature.Onboard control ports of minimum 1 x IR, 1 RS-232 for controlling third party devices. should support video wall feature up to minimum 64 displays. Enterprise-grade security including 802.1X, Active Directory® credential management, TLS/SSH, and AES-128 or AES 256. CEC, EDID,HDCP 2.3 compliant. Complete with software / Application .Should be capable of powering via POE power sourcing network switch or external power adapter should be supplied. Should have flanges for mounting behind the display or additional mounting accessories should be supplied.The device should comply to CE, UL, FCC, , (Additional BIS to be shared if applicable). The encoder, decoder and control system should be from the same OEM. Make: Crestron, AMX, Extron
147SITC of AV over IP Encoder that transports 4096x2160 @60 4:2:0, deep color video support video over standard ethernet switch. Having video 1 x HDMI Input, Output 1 x RJ45 output. Should support Digital audio Formats like Dolby Digital®, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, LPCM up to 8 channels. Audio out on 1x stereo line-level audio output. Should have ethernet port Ethernet supporting TCP/IP, UDP/IP, DHCP, SSL, TLS, SSH, SFTP, IPv4 and IPv6, HTTPS. Onboard control ports of minimum 1 x IR, 1 RS-232 for controlling third party devices, without the need of running control cable from controller. Should suppot AES67 Audio Embedding and De-embedding. Enterprise-grade security including 802.1X, TLS, and AES‑128 content encryption. HDCP 2.3 compliant. JITC Certified product. Should comply to CE, IC, FCC. Make: Crestron, AMX, Extron
148SITC of AVOverIP managed Ethernet switch. Should have minimum 24x 1000Base-T Gigabit Ethernet RJ45 port that provides PoE+ switch having 1G copper PoE+ PORTS and 4 10G Fibre SPF+ Ports with 720 W PoE budget and pre loaded AV profiles in complete as per the direction of Engineer-in-charge. Make-Netgear-GSM 4328.
149SITC of HDMI Cable 1.8 mtr in complete as per the direction of Engineer-in-charge. Make: Crestron, AMX, Extron
150SITC of Snake Cable: Supply and Laying of 8 pair Analog Audio Snake Cable, 24. AWG stranded (7x32) TC conductor, Polyolefin insulation, individually shielded, number or color-coded PVC jackets and shields bonded to stripsimultaneously over all shield and 24 AWG TC drain wire. Make: Krystals/ Kramer/ Belden
151SITC of Microphone Cable: Supplying and Laying of of 20 AWG 2 core microphone cable Make: Krystals/ Kramer/ Belden
152SITC of Speaker Cable: Supplying and Laying of 4.0 Sq.mm 2 core speaker cable Make: Krystals/ Kramer/ Belden
153SITC of Speaker Cable: Supplying and Laying of 6.0 Sq.mm 2 core speaker cable Make: Krystals/ Kramer/ Belden
154SITC of AV Connectors such as XLR male, XLR female, RJ45, 3.5mm Stereo Connector, 6.35 mm mono connector, BNC.Make: Neutrik/ MX/ Krystals/ Belden/ Legrand in complete as per the direction of Engineer-in-charge.
155Stage Lighting & Drapery Solution- SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel controlBeam Angle of 11˚ / 25˚ / 35˚Total Power Consumption of 160W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory.Brand embossed impact on the light body for genuine product Make: Leksa Lighting/ETC/ADJ
156SITC of 300W LED Profile Spot 14 Degree Light complete with, 3200K CCT Colour TemperatureCOB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modesIP20 protection having Lux @ 3 Mtr above 38182 suitable to illuminate the key presenter or talent on stage.RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory.Brand embossed impact on the light body for genuine product Make: Leksa Lighting/ETC/ADJ
157SITC of 200W LED Spot Light RGBW, Beam Angle 15°/ 25° complete with LED source from Lumi led / Seoul / Nichia or reputed make (LM80 to be provided) RGBW Lamp source DmX 512 dimming with 8 Channel Unlimited Colour Mixing through DmX 0 ~ 100% Linear dimming, In built presets for different colours Strobe Mode 20 times/Sec Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colours, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body.RDM Control options with latest technology (RDM ID to be specified)Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for genuine productMake: Leksa Lighting/ETC/ADJ
158SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs LED source from Lumi led / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady colour No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections Total Power Consumption of 180W Sound Active Mode Control IP20 protection. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory.Brand embossed impact on the light body for genuine productMake: Leksa Lighting/ETC/ADJ
159SITC of 400W LED T Light 30/40 Degree complete with 3200K CCT Chip On Board LED Lamp sourceCOB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 8 Channel modes CRI & TLCI Value > 90 , Strobe option Adjustable 1 ~ 25 times / Sec Variable, Beam Angle 30 Degree Total Power Consumption of 410W 11.7KHz Refresh Rate, In built preset’s for effects Fuse and Internal safety protections, Active Cooling with Low Noise Fan, 5 Pin XLR for DmX, High quality well designed inbuilt reflector, Flicker Free 100% for Tv & Film Cameras, Black finish housing, IP20 protection, Having Strobe option and smooth dimming, illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified)Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory.Make: Leksa Lighting/ETC/ADJ
160SITC of 200W LED CCT Tuneable Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) Seamless CCT tuning from 3000K to 6000K at constant power output of 200W along with the flood to spot zooming option from 10 Deg to 50 Deg. High quality uniquely designed Fresnel Lens CRI,TLCI and R9 value above 95 LED COB Based Source , Beam Angle 10 ~ 50 degree. No Multiple Shadows – Single Source illumination Total Power Consumption of 210W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC100-240V,50Hz Working Temperature - +40° ~ -30° Active Cooling with Low Noise Fan DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin/3pin xlr Black powder coated fabricated housing with normal yoke. DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin/3pin xlr Black powder coated fabricated housing with normal yoke.RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embossed impact on the light body for genuine product Make: Leksa Lighting/ETC/ADJ
161SITC of Moving Head Beam effect light 12R Base High bright long throw beam with linear zoom range Zoom range from o to 3.8 Degree Lamp Source: Yodn 280W 12R Arc Lamp Total Power Consumption of 450W, Electrical: AC 100-240V, 50/60Hz 16 Channel DmX Control Color System:1 color wheel+14pcsPrism：8prism+48prism with rotation effect 16 Bit Dimmer Control Gobos System: 16+1pcs gobos.Double chip Stroboscopic (0.5 ~ 9 times /SEC), Pan Angle 540°, Tilt Angle 270°IP20 rated product. Electrical: AC 100-240V, 50/60Hz Make: Leksa Lighting/ETC/ADJ
162SITC of Aluminium O Type clamp made up of high grade aluminium having thickness not less than 5mm suitable for round tubes of dimension varying from 40 to 55mm outer diameter, provided with fixture mounting 25mm M8 bolt and wing nut, minimum 100KGs of safe working load, 40mm bolt and wing nut for pipe locking. Make: Leksa Lighting/ETC/ADJ
163SITC of Light Fixture dual safety, Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleeve on the rope. Carabiner Clip.Make: Leksa Lighting/ETC/ADJ
164SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Make: Leksa Lighting/ETC/ADJ
165SITC of Fixed stage side Ladder as per the design, With an Mild Steel 40NB 48 OD black matt finish. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm. Size of 600mm x 3000mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site conditions Round pipe welded to create square frame Heavy duty trolly to hold and rotate wing frame Material for the light bar shall be of Mild Steel Pipe. Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Ladder Length shall be of customized type as per site condition. Make: Leksa Lighting/ETC/ADJ
166SITC of Fixed stage Lighting bar/winch of 15Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fasteners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures Make: Leksa Lighting/ETC/ADJ
167SITC of Motorised integrated FOH fly bar/winch of 16 Mtr length Motorised Light bar, the winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have a Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have a drive unit base frame to fix the gear box which contains one shaft. This mechanism shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. WIFI operated wireless smart working functionality Dual barrel duly powder coated Made using 40NB dual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and mythology. WIFI based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gearbox along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. Make: Leksa Lighting/ETC/ADJ
168SITC of Power Distribution Electrical panel having a Incomer of 100 A. Floor mount / rack mount / wall mount.Miniature circuit brakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures. Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130ement.All welding slag grounded off and welding pits wiped smooth with plumber metal. Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius. Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Neutral separation made using incomer , Voltmeter, Ammeter display for reading visualization Individual MCB control for 36 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade, aluminium/copper conductor PVC insulated and sheathed, armoured cable and shall be suitable for connections. Provided with ivory connectors for the internal terminations and external outgoing connecting points Custom built as per specification and project required.Make- Siemens/ABB/Schneider/Legrand
169SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixingMake: Leksa Lighting/ETC/ADJ
170SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ), Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixingMake: Leksa Lighting/ETC/ADJ
171SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing Make: Leksa Lighting/ETC/ADJ
172SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixingMake: Leksa Lighting/ETC/ADJ
173SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing Make: Leksa Lighting/ETC/ADJ
174SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares
175SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 150 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid. Make- Leksa Lighting/ETC/ADJ
176SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid. Make- Leksa Lighting/ETC/ADJ
177SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections Make- Leksa Lighting/ETC/ADJ
178SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing Make- Leksa Lighting/ETC/ADJ
179DmX Touch Screen based controller having 7” Multi touch screen option 2 DmX Outlets 5 Pin XLR’s, 512 Channels each, Optically isolated outputs, 4 Smooth Encoders for control operation of attributes, Backlit keys, 12 Fader Stacks, 600+ Playbacks, 350+ Group saving, 350+ Presets, User defined shape effects, Macro saving options, External Midi timecode options, Internal clock, Shortcut user interfaces, Master fader, Blackout Key under Master fader, Numerical keypad for the light command entry inbuilt embedded within controller, USB interface, Scene saving options, Show saves and load save features, custom built user interface library for fixture files. Make: Leksa Lighting/ETC/ADJ
180SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8 Isolated outputs, Slow blow safety fuse 5 Pin XLR for output interface, Dual mode to select 2 universe operation, DmX Input through 5 Pin XLR Connector, Control Protocol RDM and DMX 512 Powder coated compartment finish Mounting brackets for grid mount. Make: Leksa Lighting/ETC/ADJ
181SITC of C Profile MS Hot rolled strips 3mm thick with Added U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint Make: Leksa Lighting/ETC/ADJ
182SITC of 36-way Power Marshalling Box made up of MS Sheet metal fabricated housing black powder coated and ivory connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size. Make: Leksa Lighting/ETC/ADJ
183SITC of Auxiliary Marshalling Box, made up of MS Sheet metal fabricated housing black powder coated and ivory connectors for the internal terminations and external outgoing connecting points, fibre glands of suitable size. Make: Leksa Lighting/ETC/ADJ
184SITC of Flat Cable Wire harness required to provide the input power to the sockets on the hoists connecting between grid level circuit box to on hoist circuit box with below specifications: FRLS Multi core Copper cable 18 Cores of Power each with 2.5 Sq. mm copper wires insulated with high insulated material 2 DmX 5 core cables with low noise Width of the flat cable 120mm approx. Clips at each bending of the cable to act as retractor unit Long life, no breakage, smooth folding Make: Leksa Lighting/ETC/ADJ
185SITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 1Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indictor and necessary meters operated wireless smart working functionality for the motorised lightbars should be there with one neutral & phase connection slots and with 2 virtual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features Make: Leksa Lighting/ETC/ADJ
186SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivory connectors, necessary glands etc.Make: Leksa Lighting/ETC/ADJ
187SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size. Make-Polycab/KEI/Finolex/Havells/Gloster/RR Kabel
188SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. Make-Polycab/KEI/Finolex/Havells/Gloster/RR Kabel
189SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. Make-Polycab/KEI/Finolex/Havells/Gloster/RR Kabel
190SITC of FRLS Copper unarmoured Flexible cable IS694 having 12 Core each of 1.5 Sq mm size. Make-Polycab/KEI/Finolex/Havells/Gloster/RR Kabel
191SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signal. Make: Leksa Lighting/ETC/ADJ
192SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Make: Leksa Lighting/ETC/ADJ
193SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint . Make: Leksa Lighting/ETC/ADJ
194SITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 2 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indicator and necessary meters operated wireless smart working functianailty for the motorised lightbars should be there with one neutral & phase connection slots and with 2 vertual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features Make: Leksa Lighting/ETC/ADJ
195SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc. Make: Leksa Lighting/ETC/ADJ
196SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. Make-Polycab/KEI/Finolex/Havells/Gloster/RR Kabel
197SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. Make-Polycab/KEI/Finolex/Havells/Gloster/RR Kabel
198SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size: 18.5Mtr x 6 Mtr.
199SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 18.5 Mtr x 6 Mtr.Make: Leksa Lighting/ETC/ADJ
200SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 17.5 Mtr x 1.5Mtr.Make: Leksa Lighting/ETC/ADJ
201SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 16Mtr x 1.2Mtr. Make: Leksa Lighting/ETC/ADJ
202SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 6Mtr x 1.5 Mtr Make: Leksa Lighting/ETC/ADJ
203SITC of On Stage Fixed Valance Bar 17.5 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Make: Leksa Lighting/ETC/ADJ
204SITC of On Stage Fixed Frill Bar 16 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Make: Leksa Lighting/ETC/ADJ
205SITC of Fixed Wing Structure designed as per site condition for a height approx 6 Mtr x 1.5 Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. Make: Leksa Lighting/ETC/ADJ
206SITC of Motorized DMX operated Main Curtain 18.5Mtrs straight, Centre partting as per design.This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete lengthCurtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller.Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Leksa Lighting/ETC/ADJ
207SITC of Motorized DMX operated Rear Curtain 18.5Mtrs straight, Centre partting as per design.This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree.The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm DaiUndergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Leksa Lighting/ETC/ADJ
208Supply & Fixing of 19mm for underdeck insulation (Self Adhesive Only ) XLPE Physically / Chemically crosslinked polyethylene foam,with factory reinforced alupet foil facing, having Class O fire properties and very low fire propagation of < 5.5, passing E-84 at < 25/50,the density of the foam should be not less than 25-30kg/m3 and the maximum thermal conductivity K should be 0.032W/mK @23 Deg C , the permeability resistance factor u shouldn't be less than 14000. (Makes - Thermobreak / Trocellen/ Aerolam)
209CIVIL WORKS (PART-I) Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debries with 50m lead etc complete as per specification and direction of Engineer in charge
210Dismantling & removing doors, windows & ventilators including removal of frame, hinges, fastening and stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete
211Dismantling & Removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete
212Dismantling G.C.I. Sheet or A.C. Sheet roofing after carefully removing nuts & bolts including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete
213Dismantling and removing wall panelling including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete
214Carriage of surplus earth by mechanical means upto 5km lead including cost of all labour for loading and unloading chargeRCC s, transportation and spreading in layers at the dumping area etc complete as per specification and direction of Engineer in charge
215Cement concrete (1:2:4) in foundation and plinth using 12mm size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
216Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. 1st floor
217RCC work of M-25 with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Column 1st floor
218Lintel 1st floor
219Chajja 1st floor
220Roof beam -1st floor
221Roof slab -1st floor
222Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge 1st floor
223Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(1st floor)
224Providing 16 mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(1st floor)
225Providing 6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to inside ceiling RCC surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(1st floor)
226Supplying and Providing of 32mm thick flush door shutters with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved desig and quality with cost of materials and labour etc complete as per specification and direction of Engineer in charge
227supplying, fitting and fixing of Vitrified tiles Colour/printed in floors of size (600x600mm) Coloured tiles over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge Ground floor
2281st floor
229Supplying, fitting and fixing of 10mm thick Granite tile in floors upto 0.10 sqm over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge Ground floor
230Supplying and fixing of Double skin wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c with 9mm thick BWR block ply and 4mm thick veneer finished with melamine polished on both the faces complete.wall
231Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge In all floors.1st floor
232Painting two coats with Plastic Emulsion paints of approved colour, shade including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge. 1st floor
233Painting two coats with anti-fungal resistance Weather Seal Coat of approved shade over a coat of primer upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge Ground floor
2341st floor
235Supplying, diluting and preparing Chemical Emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional Anti Termite Treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313/1981(Part-II) and as per the direction of the Engineer-in-charge including cost of all materials, labour, taxes, etc. complete.
236Providing & fixing of toughened glass Partition using 12mm thick toughened glass of Dorma premium ( 911298) PT 90 side connector and PT 80 glass to glass connector with silicone, 12mm clear toughened glass with cut out and hole including perimetre ceiling of glass to glass joints with silicon sealant etc. as per drawing and specification including cost conveyances taxes of all materials with cost of all labour, T&P required for the work etc. complete in all respect.
237Providing and laying Broadloom roll carpet nylon of pile content 100% PA Luxes 2-ly heatset with non woven PES primary backing and premium back secondary backing 7-8 mm pile thickness, piles weight not less than 1000GSM with anti static, termal resistance, sound insullation & sound absorbtion properties. Carpet to have fire resistance of Cfl-s1 (with adhesion, fevicol/dendrite) and suitable for allergies. Rate includs minimum 6mm of under lay & complete installation with 6 mm backing fome necessary stiching etc incluiding m cost of labour, convence royalties, loading Junloading, sundries, watering & curing, T&P etc. complete as per the direction of the Engineer-in-charge charge (Approve make Welspun / CCIL or equivalent)
238Providing & Fixing Techstyle® or equivalent honeycomb acoustic Wall Panelling / False Ceiling System in White/Black colour comprises of 1200mm wide x 1200mm long x 28.5mm deep panels having cellular core made from modified glass matt, aesthetic surface is made from FR non woven fabric on glass matt & back surface having inorganic coating on glass matt & The panel shall have NRC value of 0.85 (ASTM C 423) & SAA Value of 0.89 (ASTM C423) including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, Over head charges, Contractor's profit etc. complete as per the direction of the Engineer-in-Charge. (Make Haunter Douglas, Armstrong, Everest / Ecotone)
239Supply and Installation of false ceiling of Armstrong Subtex Nubby steppe edge Glass fiber core ceiling tile of size 595 x 595 x 15 mm having rear side full encapsulation with density 120 Kgs/m3. weight 1.8 kg/ m 2 which is suspended by using 0.3 mm thick and 15 mm wide pre coated metal T 15 grid system. The technical parameters are as follows: Core Glass fiber, Fire Class 1 & P Acoustics-NRC 0.90, Thermal 0.066 W/mK Climate (OC RH) \\"-40,\\" 95, Termite resistance Light reflectance - 85%, Green (RC %)35, Hygiene (VoC. Clean room) Low, Class 3 Strength. Load capacity (Kg) - Anti sag. The T 15 Grid system of 600 x 600 mm module shall include wall angle(WA 15 W 30) with unequal flanges of size 15 & 30 mm wide, length 3000 mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300 mm centers. Then suspend the Main T 15(MT 15 W 32 H) having flange width 15 mm, height 32 mm and length 3600 mm from the soffit with help of soffit cleat and wire rod along with leveling spring clip at 1200 mm c/c. Cross T 15 (C T 15 W 12) with flange width 15 mm, height 26 mm and length 1200 mm is then interlocked into the pre-cut slots in the Main T 15 at 600 mm centers in the direction perpendicular to the Main T 15. Finally Cross T 15 (CT 15W 26 H) having flange width 15 mm, height 26 mm and length 600 mm are then interlocked into the pre-cut slots in the 1200 mm Cross T15 at 1200 mm centers and in direction parallel to the Main T 15. Subtex Nubby steppe edge of size 595 x 595 x 15 mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind subtex panels are oriented in one direction to achieve uniform shade. 3 Year Warrenty & Test certificate will be submitted after procurement of materials. (Basic rate of 15 mm Subtex Nubby square Edge (595 X 595 x 15 mm of size) tile-Rs.1785.00/sqm.
240Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0\\" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0\\"x2'0\\" with12.5 mm thick Gypsum board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
241Providing and fixing of factory made 100% solid WPC (Wood Polymer Composite) Door frame of frame size 65x125mm single Rebated, made from Wood Polymer Composite (Single extruded process) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood powder / Rice Husk / Wheat Husk) and Non tosxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg./cbm & an ISO 9001 -2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N), Minimum Compressive strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class. A category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS Dash Fasteners / Hold fast of required dia and length all as per specifications drawings of approved quality including cost, conveyance etc complete as per specification and direction of Engineer in charge
242Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors, windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials, conveyance,taxes, etc. all complete as per the direction of Engineer-in-charge
243Supplying, fitting & fixing in all floors of M.S. gate, MS Grill in doors and windows with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials with cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost .
244Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mm X2mm @ 0.90mtr. C/C and stainless square pipes bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance of Materials, Labour, TandP etc required for the complete in all respect and as per specification & direction of Engineer-in-charge
245PH Works - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge (Supreme/Ashirvad/Oriplast) 20mm dia C-PVC Pipes In ground floor
24625mm dia C-PVC Pipes
247Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall In Ground floor
248Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In Ground floor
249Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.(Jaquar/Cera/hindware/PW/ Prayag/ equivalent Make )- 15mm dia CP two way bib cock(CON-CHR-041KN)
25015mm CP wall mixture with telephonic shower(3 in 1)(CON-281KN)
25115mm dia CP angle stop cock(CON-CHR-053KN)
25215mm dia CP flange
25315mm Cp extention piece
254Over Head Shower 100mm dia round (OHS-CHR-1999)
255Shower Arm (SHA-CHR-477)
25625mm dia C-PVC ball valve.(Ashrivad make)
257125mmdia C.P.grating
25815mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)
259600mm X 125mm C.P glass shelf (ACN -CHR-1171N)
260CP towel rail (25 mm)(ACN-CHR-1111N)
26115mm dia C.P Pillar cock(CON-CHR-021KN)
262C.P towel ring(ACN-CHR-1121NMI)
263CP Soap dish Holder (ACN-CHR-1131N)
264Soap dispensing with glass bottle(ACN-CHR- 1137N)
265Toilet roll holder(ACN-1153N)
266Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres capacity pvc low level cistern (Slimline-white)
267Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
268110mm U-PVC door Tee
269110mm U-PVC plain Tee
270110mm U-PVC door bend
271110mm U-PVC plain bend
272110mm dia U-PVC off set
273110mm dia U-PVC 'P' trap
274110mm dia U-PVC cowl
275110mm dia U-PVC clamp
276Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge.250mm to 375mm thick wall
277Supplying all materials, labour, T&P and cutting by chiselling in brick masonry wall for fixing HCI pipes of following nominal size and fittings including making good the same with brickwork in cement mortar (1:3) including plastering etc all complete as per PH specification and direction of the Engineer in charge.100mm dia
278Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.One Piece Closet \\"Berlin\\"(92099)
279E.W.C. with S trap plain with seat cover(Parryware/Hind ware/Cera/Kerovit/Somany)
280Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge.Half pedestal basin (Hindware) No.91049
281550mmx400mm size wash hand basin with pedestall Parryware/Hind ware/Cera/Kerovit/Somany)
282Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.Half stall urinal (Jaquar)URS-WHT-13261
28315mm CP spreader
28432mm CP doom waste
285Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in chargeDesign Mirror(Parryware make
286Supplying all materials,labour,T&P and dismantling the damaged European water closet or Anglo Indian water closet and removing the debris at a safe distance as per direction of the Engineer in chargea.E.W.C./AIWC/Basin/Cistern
287Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking of the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge.
288Dismantling and removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge.
289Dismantling and removing old tile dado from walls including racking out joints 12mm deep and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge.
290Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
291Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.12mm thick CP (1:4) on bw- In gf
292Fitting and fixing vetrified tiles on floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic floor tiles of premium grade Somany Geostone Mist make of size 600x600mm to be pre-approved by the Engineer in charge) In Ground Floor
293Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of premium grade Somany Daino Light(Glossy) make size 300 x 600 special plain / printed series to be pre-approved by the Engineer in charge)In ground floor (inside/outside)
294Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
295Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
296Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge- In Ground floor
297Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV (Eureka Forbes)of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
298Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm
299Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inside size 760mmx760mmx460mm
300Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inside size 910mmx910mmx910mm
301Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. RCC rings soakway pit 1.22m dia x 2.10m deep
302Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class 3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete
303160mm dia u-pvc pipe alround concrete
304Supplying all materials, labour, T&P and cleaning choked inspection chamber/man hole chamber/sewer line/septic tank by engaging sweeper using bamboo and disposing sewage at a safe distance all complete as per direction of the Engineer in charge. Sweeper
305Supplying all materials ,labour for removing of sludge from septic tank and disposing them at a suitable distance by engaging sweeper using cess pool truck through biring at a safe distance etc.all complete as per direction of the Engineer-in-charge.Sewage cess pool. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56353393
AUTHORITY Government Departments
TENDER VALUE 6.83 Crore
LAST DATE 20-07-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Repair And Renovation Work Of The Auditorium Hall Of Odisha Judicial Academy Cuttack
Basic Detail
Tender No CCE.Ctc.(RandB)5/2026-27
Bidding Type Tender
Location
City Cuttack
State Odisha
Key Dates
Publish Date 08 Jul 2026
Submission Date 20 Jul 2026
Open Date 21 Jul 2026
Finance
Tender Value 6.83 Crore
Tender Fee 10000
EMD 6.83 Lakhs
Exemption Available
Document List
2a441c8f-8765-4757-8678-268707adc49c.html
BOQ_600131.xls
Clarification_OM.pdf
DTCN.pdf
Tendernotice_1 (10).pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Jul 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

2a441c8f-8765-4757-8678-268707adc49c.html

xls

BOQ_600131.xls

pdf

Clarification_OM.pdf

pdf

DTCN.pdf

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders