Tender For Construction Of Twin F Type Quarter At Rws&S Colony Gadtor Of Rws&S Division, Nuapada In The District Of Nuapada.
Tender Value
47.60 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
47700
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Twin F Type Quarter At Rws&S Colony Gadtor Of Rws&S Division, Nuapada In The District Of Nuapada.
BOQ
| Sl. No. | Item Description |
| 1 | BUILDING PROPER (CIVIL):-Earth work in excavation in foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm.to 7cm. and laying in layers not exceeding 0.3 m. in depth asper direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with sand and wel watered & rammed etc . Complete including cost of sand . |
| 3 | Cement Concrete (1:3:6) by using 4cm. Size B.H.G. metal including cost, conveyance etc. complete. |
| 4 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 5 | Brick work with Fly Ash brick in foundation & plinth using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C. |
| 6 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (a) Column base |
| 7 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (b) Column |
| 8 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (c) Chajja |
| 9 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (d) Beam |
| 10 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (e) Plinth beam |
| 11 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (f) lintel |
| 12 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (g) stair case |
| 13 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (h) Roof slab |
| 14 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 15 | 2.5 cm. thick grading concrete (1:2:2) on roof slab with 6mm. size hard granite chips on new work. |
| 16 | 16mm thick cement plaster (1:6) for brick or work stone masonry. |
| 17 | 12mm thick cement plaster (1:6) for brick work. |
| 18 | 20 mm thick cement plaster (1:6) for stone work. |
| 19 | 12mm thick cement plaster (1:4) for brick work with cement punning for skirting . |
| 20 | Supplying ,fitting and fixing vitrified tile in floors Tile 600mmx 600mm size of approved shade and make (Single Charge) confirming to IS: 13755 laid on 20 mm thick cement mortar (1:4) ( 1 cement : 4 course sand ) and filling the joints with white cement of approved quality including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge. |
| 21 | Providing and fixing Ceramic tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 22 | Supplying, Fitting & Fixing of Iron Doors & Windows Shutters and Grills etc. with all cost & conveyance etc complete. |
| 23 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame, section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in- charge. |
| 24 | Supplying all labour, T&P and materials for providing dressed seasoned sal wood work framed and fixed (W & P) in trusses purlins frame of doors, windows and door etc. including cost, conveyance, watering, curing, hoisting, laying, royalty and all taxes of all materials etc. complete as per the direction of Engineer-in-Charge. |
| 25 | Supplying all labour, T&P and materials for fitting, fixing Plywood Flush door made out of 25mm thick plywood and as per approved design and specification including fitting and fixing with all other stainless steel accessories etc. complete as per direction of Engineer-in- charge. |
| 26 | Supplying all labour, T&P and materials for fitting, fixing of ACP (Aluminium Composite Pannel) doors of following size as per specification including cost of conveyance all other accessories etc complete as per directioon of EIC. |
| 27 | Priming one coat with any approved primer including cost of primer for Steel work. |
| 28 | Painting two coats with any approved Enamel Paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge. |
| 29 | Finishing surface of wall with cement based wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete. |
| 30 | Wall painting 2 coats with plastic emulsion paint of approved shade over one coat of primer including cost of paint , scaffolding ,staging & cost of all materials , labour etc.complete as per direction of Engineer-in-charge. |
| 31 | Finishing Wall with Weather seal Coat two coats of approved shade to out side the wall surface including cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge. |
| 32 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 33 | COMPOUND WALL:-Earth work in excavation in foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm.to 7cm. and laying in layers not exceeding 0.3 m. in depth asper direction of the Engineer-in-charge. |
| 34 | Supplying all labour, T&P and material for providing and filling sand in F&P including watering and ramming, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 35 | Supplying all labour, T&P and material for providing C.C. (1:3:6) using 4 cm. size CBHG metal including watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 36 | Supplying all labour, T&P and materials for providing R.C.C. work of M-20 grade with 20mm and down graded CBHG chips including cost, conveyance, watering, curing, hoisting, laying, royalty and all taxes of all materials etc. complete as per the direction of Engineer-in-Charge. |
| 37 | Supplying all labour, T&P and material for providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. (a) Foundation and plinth beam |
| 38 | Supplying all labour, T&P and material for providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. (b) Column |
| 39 | Supplying all labour, T&P and material for providing MS reinforcement of Sail, TMT or equivalent for RCC work including cutting, bending binding & tying the grills and placing in position including cost of MS rod, binding wire 18 to 20 gauge, conveyance, all taxes of all materials etc. all complete as per the direction of Engineer-in-Charge. ( @ 0.80 qntl / cum. of item RCC ) |
| 40 | Supplying all labour, T&P and material for providing Fly ash brick work with 1st class 25 x 12 x 8 cm. CB bricks with cement mortar (1:6) including watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 41 | Supplying all labour, T&P and material for providing 16 mm thick cement plaster (1:6) over brick work including racking out joints, watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 42 | Supplying all labour, T&P and material for providing 12 mm thick cement plaster (1:6) over brick work including racking out joints, watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 43 | Supplying of all materials, labour and T&P for weather coat paint two coats to walls with good quality paint including all cost. etc. all complete as per directon of engineer-in-charge of the department. Out side Plaster etc. complete as per the direction of Engineer-in-Charge. |
| 44 | Supplying all labour,T&P and material for making of M.S. Gate of size - 2.50 x 1.50 Mtr. including making necessary holes in walls or RCC structure and making good to the damages with cost of MS gate, conveyance and all taxes etc. complete as per the direction of Engineer-in-Charge. |
| 45 | Supplying all labour, T&P and material for painting two coats to MS Gate with any approved paint including cost of paint, conveyance and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 46 | APPROACH ROAD AND SITE DEVELOPMENT:-Earth work in ordinary soil in embankments, roads, etc. with approved material obtained from borrow pits with 5 Extra lead of 25m or part there of over the initial lead including hire and running charges of Roller and all other machineries , cost, conveyance & royality of materials , T&P and Cess required for the work etc complete as per specification & direction of Engineer-in-Charge. |
| 47 | Supplying filling in foundation and plinth with sand in layers not exceeding 22.5 cm (9\\") thick including watering and ramming with cost conveyance,royalities,taxes of the materials and labour with T&P required for the work etc. complete as per specimen |
| 48 | Cement concrete of proportion (1:3:6) in foundation and floors using 4 cm(1.5\\")size clean hard black HG metal of approved quality and from approved quarry including hoisting,lowering and laying concrete in layers not exceeding 15 cm (6\\")thick |
| 49 | Cement concrete (1:2:4) with 12 mm,size hard broken granite chips including all cost,conveyance,royalities etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender