Tender For Construction Of D Type Quarter At Rws&S Colony Gadtor Of Rws&S Division, Nuapada In The District Of Nuapada.
Tender Value
36.42 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
11 days left
EMD
36500
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of D Type Quarter At Rws&S Colony Gadtor Of Rws&S Division, Nuapada In The District Of Nuapada.
BOQ
| Sl. No. | Item Description |
| 1 | Building Proper (Civil):-Excavation of foundation in hard soil within initial lead of 50 mtr and lift of 1.5 mtr etc including levelling and dressing the foundation trenches, stacking the excavated materials away from the work site etc as per the instruction of E.I.C.in depth as per direction of Engineer-in-charge.. |
| 2 | Providing Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. in foundation |
| 3 | Brick work with Fly Ash brick in foundation & plinth using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C. (a) Buiding |
| 4 | Filling in foundation and plinth with sand well watered and rammed including cost of sand |
| 5 | Fly ash Brick masonary in (1:6) cement mortar with 23 cm bricks including all cost, conveyance,taxes,royality etc.complete. |
| 6 | Reinforced cement concrete M-25 with 12mm size hbg chips for RCC works including hoisting and laying (a) Column Footing |
| 7 | Reinforced cement concrete M-25 with 12mm size hbg chips for RCC works including hoisting and laying (b) Plinth bend |
| 8 | Reinforced cement concrete M-25 with 12mm size hbg chips for RCC works including hoisting and laying © Lintel bearing, bed block qty. |
| 9 | Reinforced cement concrete M-25 with 12mm size hbg chips for RCC works including hoisting and laying (d) Columns & Beams |
| 10 | Reinforced cement concrete M-25 with 12mm size hbg chips for RCC works including hoisting and laying (e) RCC Chajjah & Fins |
| 11 | Reinforced cement concrete M-25 with 12mm size hbg chips for RCC works including hoisting and laying (f) Roof slab |
| 12 | Labour for cutting bending binding and tying the MS grills and placing in position including cost of binding ire 18 to 20gauge |
| 13 | 12mm thick cement plaster (1:6) for brick work outside plastering |
| 14 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge. |
| 15 | 12mm thick cement plaster (1:6) finished smooth to brick work with neat cement punning etc complete. |
| 16 | Supplying, fitting and fixing of MS Grill for window etc complete. |
| 17 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame, section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in- charge. |
| 18 | Supplying all labour, T&P and materials for providing dressed seasoned sal wood work framed and fixed (W & P) in trusses purlins frame of doors, windows and door etc. including cost, conveyance, watering, curing, hoisting, laying, royalty and all taxes of all materials etc. complete as per the direction of Engineer-in-Charge. |
| 19 | Supplying all labour, T&P and materials for fitting, fixing Plywood Flush door made out of 25mm thick plywood and as per approved design and specification including fitting and fixing with all other stainless steel accessories etc. complete as per direction of Engineer-in- charge. |
| 20 | Supplying all labour, T&P and materials for fitting, fixing Plywood Flush door made out of 25mm thick plywood and as per approved design and specification including fitting and fixing with all other stainless steel accessories etc. complete as per direction of Engineer-in- charge. |
| 21 | Supplying fitting & fixing of Vitrified tile in dado in force treade or steps and including on 25mm thick bed of cement mortar (1:1) joint with net cement slowray mixed with prgment to materials the shades of tiles including rubbing & polishing etc. with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of |
| 22 | Supplying fitting & fixing of Vitrified tile in dado in force treade or steps and including on 25mm thick bed of cement mortar (1:1) joint with net cement slowray mixed with prgment to materials the shades of tiles including rubbing & polishing etc. with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of |
| 23 | Supplying fitting & fixing of Vitrified tile in dado in force treade or steps and including on 25mm thick bed of cement mortar (1:1) joint with net cement slowray mixed with prgment to materials the shades of tiles including rubbing & polishing etc. with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge |
| 24 | 16mm thick cement plaster (1:6) over in side surface of wall |
| 25 | Finishing surface of wall with cement based wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.comple |
| 26 | Finishig Wall with Weather seal Coat two coats of approved shade to out side the wall surface including cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge |
| 27 | Wall painting 2 coats with plastic emulsion paint of approved shade over one coat of primer including cost of paint , scaffolding ,staging & cost of all materials , labour etc.complete as per direction of Engineer-in-charge. |
| 28 | Painting two coat over a coat of primer with any approved paint on new wood work |
| 29 | Compound Wall:- Earth work in excavation in foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm.to 7cm. and laying in layers not exceeding 0.3 m. in depth asper direction of the Engineer-in-charge. |
| 30 | Supplying all labour, T&P and material for providing and filling sand in F&P including watering and ramming, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 31 | Supplying all labour, T&P and material for providing C.C. (1:3:6) using 4 cm. size CBHG metal including watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 32 | Supplying all labour, T&P and materials for providing R.C.C. work of M-20 grade with 20mm and down graded CBHG chips including cost, conveyance, watering, curing, hoisting, laying, royalty and all taxes of all materials etc. complete as per the direction of Engineer-in-Charge. |
| 33 | Supplying all labour, T&P and material for providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. (a) Foundation : |
| 34 | Supplying all labour, T&P and material for providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. (b) Column |
| 35 | Supplying all labour, T&P and material for providing MS reinforcement of Sail, TMT or equivalent for RCC work including cutting, bending binding & tying the grills and placing in position including cost of MS rod, binding wire 18 to 20 gauge, conveyance, all taxes of all materials etc. all complete as per the direction of Engineer-in-Charge. ( @ 0.80 qntl / cum. of item RCC ) |
| 36 | Supplying all labour, T&P and material for providing Fly ash brick work with 1st class 25 x 12 x 8 cm. CB bricks with cement mortar (1:6) including watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 37 | Supplying all labour, T&P and material for providing 16 mm thick cement plaster (1:6) over brick work including racking out joints, watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 38 | Supplying all labour, T&P and material for providing 12 mm thick cement plaster (1:6) over brick work including racking out joints, watering, curing, cost, conveyance, royalty and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. |
| 39 | Supplying of all materials, labour and T&P for weather coat paint two coats to walls with good quality paint including all cost. etc. all complete as per directon of engineer-in-charge of the department. Out side Plaster etc. complete as per the direction of Engineer-in-Charge. |
| 40 | Supplying all labour,T&P and material for making of M.S. Gate of size - 2.50 x 1.50 Mtr. including making necessary holes in walls or RCC structure and making good to the damages with cost of MS gate, conveyance and all taxes etc. complete as per the direction of Engineer-in-Charge. |
| 41 | Supplying all labour, T&P and material for painting two coats to MS Gate with any approved paint including cost of paint, conveyance and all taxes of all materials etc. complete as per the dirction of Engineer-in-Charge. (a) MS Gate |
| 42 | Approach Road and Site Development:- Earth work in ordinary soil in embankments, roads, etc. with approved material obtained from borrow pits with 5 Extra lead of 25m or part there of over the initial lead including hire and running charges of Roller and all other machineries , cost, conveyance & royality of materials , T&P and Cess required for the work etc complete as per specification & direction of Engineer-in-Charge. |
| 43 | Supplying filling in foundation and plinth with sand in layers not exceeding 22.5cm (9\\") thick including watering and ramming with cost conveyance, royalties, taxes of the materials and labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-Charge. |
| 44 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (1 ½\\") size clean hard black H.G. metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6\\") thick to |
| 45 | Providing cement concrete (1:2:4) with 12mm size clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering if necessary with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and cess as per the specification and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender