Tender For Providing And Laying Of Epdm Track, Decorative Lights, Music System, Open Gym Equipments, Repair And Other Civil Works In Shree Baake Bihari Society Park In Sector 17 Ward No. 1 Mc Panipat (Rural)
Tender Value
44.19 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
1 days left
EMD
88400
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Laying Of Epdm Track, Decorative Lights, Music System, Open Gym Equipments, Repair And Other Civil Works In Shree Baake Bihari Society Park In Sector 17 Ward No. 1 Mc Panipat (Rural)
BOQ
| Sl. No. | Item Description |
| 1 | NS ITEMS |
| 2 | RMI10 Air Swing Function Size 1177*942*1446Pre galvanized MS, Thickness 3mm |
| 3 | RMI-13 Stair Stepper with Glider Functions1036*736*1343mmPre galvanized MSthickenss 3mm |
| 4 | RMI 3 Cross Walker Functions1612*605*1545mmPre Galv MSThickness 3mm |
| 5 | Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges. |
| 6 | Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be. Including Contractor Profit, overhead charges, GST and all others charges. |
| 7 | Supply, testing and commissioning of Post Top Coloumn light made of mild steel and have ingress protection for optical compartment. Column of height 4mtr above ground level with two spot light of 10W for top illumination and column with predesigned Laser cut to illuminate the surroundings with noticeable mode. The column light pole section of 220mmx220mm x 4mm thickness up to 4mtr long. The base plate dimension are 209x209x16mm. All pole section Shall be welded by certified welders using high and MIG welding process. The Service door shall be provided at bottom part of the pole to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole is design with elongated foundation holes for fine alignment of the pole during installation. Nano Ceramic surface conversion, resistant to corrosive environment. Fitting is made of mild steel with fine laser cut design and signage closed by diffuser tailored with lighting to suit your specific needs as per detail drawing. Colour tolerance ,3 SCDM to avoid colour deviation. Nano Ceramic surface conversion, resistant to corrosive environment. All exterior parts are made of stainless steel. Diffused symmetric light without glare. Light output of source is more than 110lm/ watt, CRI)70, Surge protection 4k, operating voltage 140-270V, Branded LEDs of Osram/ Cree/Seoul and Fulham/Meanwell/Inventronics/Osramor equivalent constant voltage/current driver with THD ( 10% power factor)0.9. The CCT of led will be 3000k and fixture color will be Black as required by the project. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. Fitting is complete in all aspects with all accessories except foundation bolts.with 5 year DLP Approved Make : Keselec/VAK/Jaquar Note: The pole would be inspected by the inspection committee of the MC Panipat and only after that technical inspection Pole will be finallised for eraction at site.Note: For better understanding of the design and specification photo has been attached for design and specification of the poles along with the tender docs. |
| 8 | Providing and laying 15mm thick synthetic jogging track EPDM (9mm SBR Crumb Rubber as track bottom Cushion Layer 6mm EPDM Colour Granules top layer) of approved make COLORSPACEF/COLORPLAY/BSG/NOVAL with test reports of certified NABL lab, origin Of EPDM USA and EUROPE and equivalent. EPDM Granules shall have following minimum properties 00 Polymer content )22%, (u) Hardness of 55-65 Shore A [per ASTM D2240): (ii) Tensile Strength of )5 MPa (per ASTM D412): (iv) Elongation )500% (as per ASTM D412): (v) Density of 1.6 kg/cum (per ASTM D792). (vi) High UV rating of 3-5 on grayscale, (vi) VOC less than 3.0.0ww/1 [viii] Combustibility less than40 mm /m: (ix) Anti- Microbial and Anti-Fungal Tested material, and shall be laid in three layers.[1] First step shall be the application of single component Polyurethane based primer coating Layer, PU binder shall have a specific gravity of 1.05 the appearance of clear pale yellow and viscosity of 350-2900 cps and shall be from the original manufacturer from the list of approved makes 2. The second layer shall be an impact attenuating cushion layer of 9mm thick black crumb rubber/SBR adhered with a polyurethane binder and PU binder shall have a specific gravity of 1.05: the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes of to form a resilient porous layer. Crumb rubber /SBR shall be mixed with a minimum of 14% -16% of single- component PU base binder so as to ensure that PU binder provides 100% coating of the SBR/crumb rubber particles. The third step shall be laying a 6mm 18% binder of single EPDM GRANULES top layer with at minimumcomponent polyurethane and shall provide 100% coating of the EPDM granules particles Design on the base top layer by a specialized team of installers according to the specification of approved material and shade. The detailed technical specifications of EPDM flooring testing. material properties, application procedure, etc. are attached herewith for compliance. The documentary evidence has to be produced. for the procurement of material for manufacturer`s test certificate. An undertaking is to be furnished by the agency that surface system is tested EN 1177 For shock absorption report of SPORTS LAB approved by IAAF WORLD Athletics` company has not been World blacklisted by IAAF/Sports Authority of India/ Athletics `IAAF the means earlier `international Association of Athletics Federations or World Athletics now. The work shall be carried out by the manufacturer`s approved applicator and the prospective bidder should produce a letter from the approved strictly to manufacturer prior to submission of bid and satisfaction of the technical specifications and the engineer-in-charge. |
| 9 | Mural painting/Graffiti on walls of parks/road sides, electric poles in different colours and epoxy paint with weather shield by the skilled painters/ fine art artists and with wall Putti/White Wash as a base before the start of work and in complete satisfaction of the engineer-in-charge( Including all heights) |
| 10 | SINGLE SHOULDER PRESSMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 largethicknessM.S pipe. Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar inbending design.All remaining frame is made by 088 *3mm thick MS pipe.Weight plates: Rubberized moulding round weight plates are used.Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome Ope A. plated mild stee!048 D!A pipe open front covered with half round cap and holder end iscovered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall Goploythickness for free weight noiseless operations.Bearing: Lubricated high grade6305 `2RS`steel ball bearing.Base plate: is OD166, ID 116, and 6 mm thick.Pins: are made up of M.S bright bar.Bearing bushes: 075mm OD seamless pipe.Weight plate mounting pipe is of 048 mm MS pipe.Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe.Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-qualityrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for longendurance.Closing caps: are of PP/NYLON/HDPE materia!.Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other.Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to preventslippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for restinghandles for noise less operations.Powders Coating: All components are chemically treated to seal exterior and interiorsurfaces against corrosion. The components are electro statically powder coated atminimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidityindual color combination. |
| 11 | MINI SKI and WAIST TWISTERMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thicknessM.S pipe.Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar in bendingdesign.All remaining frame is made by 088 *3mm thick MS pipe.Weight plates: Rubberized moulding round weight plates are used.Weight Plates Holder with spring lock and spare weights holder: is made by hard chromeplated mild stee!048 D!A pipe open front covered with half round cap and holder end iscovered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wallthickness for free weight noiseless operations.Bearing: Lubricated high grade6305 `2RS`steel ball bearing.Base plate: is OD166, ID 116, and 6 mm thick.Pins: are made up of M.S bright bar.Bearing bushes: 075mm OD seamless pipe.Weight plate mounting pipe is of 048 mm MS pipe.Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe.Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-qualityrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for longendurance.Closing caps: are of PP/NYLON/HDPE materia!.Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other.Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to preventslippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for restinghandles for noise less operations.Powders Coating: All components are chemically treated to seal exterior and interiorsurfaces against corrosion. The components are electro statically powder coated atminimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity indual color combination. |
| 12 | DOUBLE AIR WALKER ( Model No. LK - 175 )DIMENSION: 7FT HT X 3FT ALL PIPES ARE GI, ISI, B CLASS BRAND: PRAKASH SURYA/ TATA/JINDALBUSH, BEARING HEAVY (SKF, NRB, OR EQUIVALENT). THE BOTTOM SUPPORT POINT 8INCH ROUND PLATE, 10MM THICKNESS. FOOTRESTS MADE UP OF FRP/PVC. CLOSING CAPS MADE UP OF FRP/PVC. PINS USED ARE MADE UP OF 25MM BRIGHT BAR. NUT BOLT GI BEARINGS: MAINTAINENCE FREE BALL BEARINGS PLASTIC PART: SOLID POLYETHYLENE, UV STABILISED/EQUIVALENT MAXIMUM USER WEIGHT: 100 TO 120 KG MAXIMUM BREAKING POINT: 140 KGPAINT: POWDER COATED. DIAMETER: MAIN SUPPORTING PIPE (100 MM DIA). |
| 13 | Supply and erection of Ahuja 700 Watts, 2 Zone PA mixer Amplifier with the features of built-in MP 3 player with remote control and LCD display for USB, SD/MMC card reader, speaker output 4 ohm, 8 ohm, 70V and 100V for each zone, powersupply AC: 220-240V 50/60 Hz DC 36V (3*12V car battery).instant transfer to DC power (car battery) if AC power fails. (TZA-7000DP) |
| 14 | Supply and erection of AHUJA outdoor garden speaker with the features of the 6.5 inch speaker runs on 15W and 30W to meet different applications. The glass reinforced plastics material and an IP 65 rating makes sure that the speaker is able to withstand harsh weather and impacts. (GSX 630T) |
| 15 | Supply installation testing and commissioning on Wall/Free Floor mounting dust and vermin proof cubical panel having minimum IP54 degree of protection aesthetically appealing with locaking facility. It should be capable of switch ON and switch OFF on time scheduling as required with the help of contector and time switch. The panel should include 32Amp three pole/ 230V Astronomical time switch and 32Amp three pole contractor and suitable arrangement for HRC fuse and proper connection and conectors. panel should also contain a selector switch for Auto and manual function of panel. The installation of panel should be proper and compete in all respects with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. |
| 16 | Lock 57 mm with one master key |
| 17 | Providing and Installation of Ahuja or equivalent 5KVA Biuebird servo high power cut. |
| 18 | Providing and Installation of Digital Timer watch (LIT) |
| 19 | HSR ITEMS |
| 20 | ALL HSR ITEMS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender