Tender For Providing Deep Borewell @ Kappan Street In Papanasam Town Panchayat.
Tender Value
5.25 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
5 days left
EMD
5250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Deep Borewell @ Kappan Street In Papanasam Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 150 mm/200mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site. Site will be shown by the TWAD Board officers including construction of mud pit. A Upto 60 mt. Depth ending below ground level |
| 2 | Reaming 200 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer Upto 60 mt. Depth ending below ground level |
| 3 | Supply of the following casing pipes of ISI approved quality with wall thickness not less than 7.5mm to 8.5mm with PVC couplers and cement Paste etc. Complete and including packing the annular space with pebbles quality and size of pebbles and the PVC pipe should be approved by the departmental officer. 200mm dia OD PVC Plain casing Pipe |
| 4 | 200mm dia OD PVC slot casing Pipe |
| 5 | 200mm dia OD PVC end cap |
| 6 | Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete supply and packing the annular space with pebbles of size and quality as approved by the executive engineers |
| 7 | Charges for developing the borewell with air compressor of 600 cfm capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board officers and conducting yield test by 'V' notch method. |
| 8 | supply and delivery of 12.5 HP Three phase Submersible pumpset of duty condition 75 lpm x 225m as per IS 8034 without panel board etc complete as per standard specification. |
| 9 | Supply of Three phase Pannel board suitable for 12.5HP with two level guard and auto start etc complete as per standard specification. |
| 10 | Supply and delivery of Flat cable suitable for submersible pumpset 2.5sq.mm |
| 11 | Labour charges for the errection of 12.5HP submersible pumpset in the Borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth walls errection clamps pressure gauges up to the exterior wall of pumping room and errection of panel board consisting of DPICN switches starter volt meter ammeter, Three Pilot ( Indicating ) lamps capacitor single phasing preventer water level guard and laying and jointing the cable s and twin earthing as per IE rules etc complete and testing to the pumpset and trial run for 10 Days. |
| 12 | Supplying and fixing of pipe and accessories ISI make including cutting and threading cost and conveyance of all charges etc complete as per standard specification. 80mm dia UPVC column pipe |
| 13 | Nylon Rope for Bore-well |
| 14 | Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification . 90 mm dia HDPE Pipe(PN8) |
| 15 | Supply and delivery of rigid PVC pipes and GI pipes to a standard length of 6m with a one end socket and other end free. The pipes should be quaranteed for pressure. 90 mm dia HDPE Pipe(PN8) |
| 16 | Supply and delivery of rigid PVC and GI Specials including cost and conveyance of all charges with ISI make etc complete. 90 mm PVC Bend |
| 17 | 90mm PVC TEE |
| 18 | 100mm dia G.I Bend |
| 19 | 100mm dia G.I Pipe |
| 20 | Lowering rigid pipes and special to trench and laying to proper grade and alignment with PVC coupler and cement paste and excuting to required pressure including conveyance of water for filling during testing etc completed as per standard specification. 90 mm dia HDPE Pipe(PN8) |
| 21 | Refilling the excavated earth for the pipe line laying as per standard specification. 90 mm dia HDPE Pipe(PN8) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender