Tender For Construction Of Work Top In The Pilot Plant Food Processing Unit & Replacement Of Damaged Transparent Roof Sheet To Processing Lines At Incubation Centre At College Of Community Science At Cskhpkv, Pal Ur (Sh:Construction Of Work Top,Provi
Tender Value
1.30 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
5 days left
EMD
2600
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Work Top In The Pilot Plant Food Processing Unit & Replacement Of Damaged Transparent Roof Sheet To Processing Lines At Incubation Centre At College Of Community Science At Cskhpkv, Pal Ur (Sh:Construction Of Work Top,Providing & Laying Water Supply And Outlet To Lab Prefabricated Worktop, Distempering, Painting)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including entire carriage of material within all leads & lifts. |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm including entire carriage of material within all leads & lifts. |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) as per direction of Engineer-In-Charge including entire carriage of material within all leads & lifts. |
| 4 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. including entire carriage of material within all leads & lifts. |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) including entire carriage of material within all leads & lifts. |
| 6 | Form work Centering and shuttering including strutting, propping etc. and removal of form for including entire carriage of material within all leads & lifts. |
| 7 | Suspended floors, roofs, landings, balconies and access platform |
| 8 | Edges of slabs and breaks in floors and walls under 20 cm wide |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement: 2 coarse sand) : 4 graded crushed stone aggregate 20 mm nominal size) including entire carriage of material within all leads & lifts. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level Cold twisted bars including entire carriage of material within all leads & lifts. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand:10 graded crushed stone aggregate 40 mm nominal size) including entire carriage of material within all leads & lifts. |
| 12 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade area of slab upto 0.50 sqm including entire carriage of material within all leads & lifts. |
| 13 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-In-Charge Granite work metre including entire carriage of material within all leads & lifts. |
| 14 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including entire carriage of material within all leads & lifts. |
| 15 | Providing and laying 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) including entire carriage of material within all leads & lifts. |
| 16 | Providing and laying 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including entire carriage of material within all leads & lifts. |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap including entire carriage of material within all leads & lifts. |
| 18 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including entire carriage of material within all leads & lifts. |
| 19 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required Size 600x450x200 mm including entire carriage of material within all leads & lifts. |
| 20 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 40mm dia including entire carriage of material within all leads & lifts. |
| 21 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore including entire carriage of material within all leads & lifts. |
| 22 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore including entire carriage of material within all leads & lifts. |
| 23 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes 75 mm diameter including entire carriage of material within all leads & lifts. |
| 24 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of material within all leads & lifts. |
| 25 | Single tee without door 75x75x75 mm |
| 26 | Bend 87.5° 75 mm bend |
| 27 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm dia nominal bore including entire carriage of material within all leads & lifts. |
| 28 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 75 mm including entire carriage of material within all leads & lifts. |
| 29 | Providing and fixing 100 mm sand cast Iron grating for gully trap including entire carriage of material within all leads & lifts. |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 20 mm nominal outer dia Pipes including entire carriage of material within all leads & lifts. |
| 31 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20 mm dia nominal bore including entire carriage of material within all leads & lifts. |
| 32 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge Internal Exposed on walls PN - 16 Pipe, 20mm OD (SDR-7.4) including entire carriage of material within all leads & lifts |
| 33 | Providing and fixing PPR Unions 20mm including entire carriage of material within all leads & lifts |
| 34 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification One or more coats on old work including entire carriage of material within all leads & lifts |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work including entire carriage of material within all leads & lifts. |
| 36 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-Charge complete in all respect Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make including entire carriage of material within all leads & lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender