Tender For Renovation Of Jal Shakti Office & Residential Buildings Under Shah Nehar Colony C Us In Tehsil Fatehpur Distt. Kangra H.P.
Tender Value
2.49 Crore
Estimated cost
Bid Submission
16 Jul 2026
4 days left
EMD
3.24 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Jal Shakti Office & Residential Buildings Under Shah Nehar Colony C Us In Tehsil Fatehpur Distt. Kangra H.P.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition CC floor including cement mortar bedding, i/c stacking of serviceable material and disposal of unservicable material complete all as specified and directed within all lead and lifts as per direction and satisfactionn of Engineer in charge. |
| 2 | Dismantling in floor/stairs/walls or any other surface of Kota stone/Tiles i/c stacking of serviceable material and disposal of unservicable material complete all as specified and directed within all lead and lifts as per direction and satisfactionn of Engineer in charge. |
| 3 | Dismantling of old cement plaster in brick/stone in cement mortar i/c stacking of serviceable material and disposal of unservicable material complete all as specified and directed within all lead and lifts as per direction and satisfactionn of Engineer in charge. |
| 4 | Dismantling of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc.,i/c stacking of serviceable material and disposal of unservicable material complete all as specified and directed within all lead and lifts as per direction and satisfactionn of Engineer in charge. |
| 5 | Providing and laying brick work with 2nd class bricks in straight or curved on plan built in cement mortar 1:6 ( 1cement : 6 sand ) curing complete within all leads and lifts as per direction and up to entire satisfaction of engineer in charge. |
| 6 | 15mm thick cement plaster in single coat on rough side of birck in cement mortar 1:4 ( 1 cement : 4 sand) curing complete within all leads and lifts as per direction and complete satisfaction of engineer in charge. |
| 7 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment along external wall floors and points of contact of wood with floors wherever required using chemical emulsion of ISI aproved brand @ 7.5 litres / sqm on the surface of the substructure/ superstructure to desired depth/area including excavation channel along the wall (internal as well as external) & rodding etc., in floors and points of contact of wood with floors complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration within all leads and lifts as per direction and satisfaction of engineer in charge. |
| 8 | Plain cement concrete M-15 (nominal mix), 50mm thick in floors using 20mm graded mechanically crushed stone aggregate as in flooring curing complete, finished even and smooth without using extra cement all as specified by the engineer in charge within all leads and lifts as per direction and complete satisfaction of engineer in charge. |
| 9 | Providing and laying double charged premium quality Vitrified tiles 8-12 mm thick (square/ rectangular) having minimum size 2 feet x 4feet or higher of Kajaria/ Nitco/ Simpolo in floors etc. set and jointed with tile adhesive of approved brand & with spacer and filling the joints with epoxy of required shade complete within all leads and lifts as per direction and complete satisfaction of engineer in charge. ( Selection of tiles will be done departmentally in the presence of officer not below the rank of Assistant Engineer.) |
| 10 | Providing and laying Glazed premium quality, coloured/printed vitrified tiles of having minimum size 2 feetx4feet or higher of Kajaria/ Nitco/ Simpolo in skirting, dado etc and the like, set and jointed with tile adhesive of approved brand and with spacer and filling the joints epoxy of required shade complete within all leads and lifts as per direction and complete satisfaction of engineer in charge. ( Selection of tiles will be done departmentally in the presence of officer not below the rank of Assistant Engineer.) |
| 11 | Providing and fixing double charged antiskid Ceramic tiles 12 mm thick having size 2 feetx4feet or higher of Kajaria/ Nitco/ Simpolo in skirting, dado etc and the like, set and jointed in neat cement slurry in white or coloured cement to match the shade of tile, laid over and including 10mm thick rendering in cement mortar 1:4 (1 cement : 4 coarse sand)with spacer and filling the joints epoxy of required shade complete within all leads and lifts as per direction and complete satisfaction of engineer in charge. ( Selection of tiles will be done departmentally in the presence of officer not below the rank of Assistant Engineer.) |
| 12 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete in all respect with in all leads and lifts as per direction of Engineer in charge. |
| 13 | Removing old paint from concrete/ masonary/asbestos cement/plaster surface after and including preparing the surface by thoroughly cleaning wall surface and other foreign matter and sand papering as required including disposing off waste material complete in all respect with in all leads and lifts as per direction and satisfaction of Engineer in charge. |
| 14 | Preparation of old surfaces of wall by Complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over and including 2mm thick wall care putty (applied in two layers), finished smooth with sand paper complete all as specified and directed. |
| 15 | Preparation of old surfaces of Ceiling by Complete 490.00 removal of existing treatment and applying two coats of oil bound distemper of ISI approved brand over and including 2mm thick wall care putty (applied in two layers), finished smooth with sand paper complete all as specified and directed. |
| 16 | Taking off chowkhats or frames i/c shutters of any size and removing from site to the store within all leads and lifts as per direction and complete satisfaction of engineer in charge. |
| 17 | Providing and fixing of Pressed steel frames for doors of size 125 mm × 60 mm × 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed including one shop coat of red oxide zinc chrome primer and filling frame with PCC m-15, type B-0 using 12.5 mm graded crushed stone aggregate, all as specified and directed. |
| 18 | 35mm thick flush shutters, solid core construction with block board core and plywood of ISI approved brand face panels commercial type on one side and one face covered with decorative face veneer with lipping/frame to match type, supplied and fitted to chowkats, complete all as specified and directed by Engr In-Charge. |
| 19 | Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with 1st class Malesian saal wood complete all as specified and directed. |
| 20 | Providing and fixing factory made uPVC of required shade and of Finesta/prominance make sliding glazed window above 1.50 m in height dimension comprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-charge. Three track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window upto 4.00 sqm.) ( Selection will be done departmentally in the presence of officer not below the rank of Assistant Engineer.) |
| 21 | Plain Colour |
| 22 | textured |
| 23 | Applying two coat of plastic emulsion paint of asian/ berger brand on walls/ roofs/ ceilings with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete within all leads and lifts as specified and as per direction and satisfaction of engineer in charge. |
| 24 | Painting two coats (excluding priming coat)on new Steel and Steel based surface with ready mixed paint of asian/ berger brand brushibng the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. vertical surfaces |
| 25 | Painting two coat of plastic emulsion paint of asian/ berger brand on walls with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.as in case of ceiling. |
| 26 | Painting two coats (excluding priming coat)on wood and wood based surface with ready mixed paint of asian / berger brands brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white complete within all leads and lifts as specified and as per direction and satisfaction of engineer in charge. |
| 27 | Providing and fixing 18 to 19 mm thick block boards of premium quality (waterproof and anti termite treated ) of ISI approved brand i.e. centuryply, greenply, action tessa & interior grade, fixed with screw to timber frame work as in cup board shutter / shelves/cabinet fixed including both side decorative laminate of thickness 1mm type1 of surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturer's instructions and wooden leaping 5mm thick all round , including continuous (piano) hinges, mild steel,bright finish ,width of flaps (when open) 30mm with welding the same along with existing steel door frame with nails to timbar frame and complete all as specified and as directed by the engineer in charge. (The measurement will be done from the front face of the cupboard/almira with any number of sheleves in side the cup board and almira.) |
| 28 | Providing and fixing anodized Stainless steel sliding door bolt anodized transparent or dyed to required shade and colour with screws etc. complete. 300X16mm. |
| 29 | Providing and fixing Stainless steel tower bolts (berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. 300 X 10mm. |
| 30 | Providing and fixing Stainless steel tower bolts (berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. 150 X 10mm. |
| 31 | Providing and fixing Stainless steel handles anodized transparent or dyed to required shade and colour with screws etc. complete. 125mm. |
| 32 | Providing and fixing Stainless steel handles anodized transparent or dyed to required shade and colour with screws etc. complete. 100mm. |
| 33 | P/f 15mm GI Pipe (medium class) (S/S) of TATA,JINDAL, APL apolo, Surya roshani, ravindra as per IS 1239 (part 1 to 4) i/c all fittings nominal bore as per the direction of Engineer in charge The rate including within all lead and lifts and other incidentals. |
| 34 | P/f 20mm GI Pipe (medium class) (S/S) TATA,JINDAL, APL apolo, Surya roshani, ravindra as per IS 1239 (part 1 to 4) i/c all fittings nominal bore as per the direction of Engineer in charge The rate including within all lead and lifts and other incidentals. |
| 35 | P/f 25mm GI Pipe (medium class) (S/S) TATA,JINDAL, APL apolo, Surya roshani, ravindra as per IS 1239 (part 1 to 4) i/c all fittings nominal bore as per the direction of Engineer in charge The rate including within all lead and lifts and other incidentals. |
| 36 | P/f 32mm GI Pipe (medium class) (S/S) TATA,JINDAL, APL apolo, Surya roshani, ravindra as per IS 1239 (part 1 to 4) i/c all fittings nominal bore as per the direction of Engineer in charge The rate including within all lead and lifts and other incidentals. |
| 37 | Providing and fixing Six layer PVC water storage tank of Syntax/vectus make (made up of food grade virgin plastic, UV stablization) as per ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres net capacity tank within all leads and lifts as per direction and satisfaction of engineer in charge. |
| 38 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) of Jaquar/ Kohler with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat cover to be measured and paid for separately) ordinary Closet |
| 39 | Providing and fixing 10.0/12.50/15.00 litresvitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately). |
| 40 | Providing and fixing vitreous China wash basin of jaquar/ Kohler with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back (630mmx450mm) complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge. |
| 41 | Providing and fixing vitreous China pedestal of jaquar/ Kohler for wash basin complete recessed at the back for the reception of pipes and fittings . |
| 42 | Vitreous china wash down water closet (pedestal pattern), with flushing cistern (single piece EWC), coloured of size 800mmx375mmx650mm of Jaquar/ 700mmx370mmx745mm including S traps, trap distance 180mm connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and CP jet/health faucet including PVC connection, fixed complete including demolition of old unserviceable WC and provision of PCC M-15, type B-1, using 20mm graded crushed stone aggregate, complete all as specified and directed by the engineer in charge. |
| 43 | Providing and fixing plastic seat cover for wash down water closet with C.P. Brass hinges and rubber buffers SOLID TYPE a white plastic seat and cover. |
| 44 | Providing and fixing rubber plug for sink / wash basin 32mm dia complete . |
| 45 | Supply & fixing of Bib tap, fancy type 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 46 | C.P Brass pillar tap with Capstan head 15mm dia , Swan neck. |
| 47 | Providing and fixing C.P. brass angle valve of Jaquar/Kohler 15mm without Nuts and pipe. |
| 48 | Providing and fixing P.V.C. connection with brass unions 300/450mm length 15mm nominal bore |
| 49 | P/f P.V.C. waste pipe flexible (Coil type) having length not less that 800 mm and dia 32 mm. |
| 50 | Providing and fixing C.P. Brass waste (for wash basin or sink ) 32mm dia |
| 51 | Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers. |
| 52 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws. |
| 53 | Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws. |
| 54 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600mm x 20mmm. |
| 55 | Providing and fixing high pressure (6 kg/sq cm) PVC spigot and socket, waste and ventilating pipes of vectus/ supreme make including fixing with approved adhesive etc. complete 110mm dia. |
| 56 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. 110mm |
| 57 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.75 mm dia. |
| 58 | Sheet glass shelf assembly 55cm long consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed with chromium plated brass screws, fixed in repair, complete all as specified and directed. Make:- Cat Part No ACN-1173N of Jaquar. |
| 59 | Providing and fixing PVC door bend of vectus/ supreme make (10 kg/cm sq. pressure) with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.110mm |
| 60 | Providing and fixing PVC floor trap of vectus/ supreme make (10 kg/cm sq. pressure) ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 mm X 75 mm. |
| 61 | P/f C.P. Gratings: Cast iron.100x100mm as per the direction of Engineer in charge. The rate is including all lead and lifts and other incidentals. |
| 62 | P/F automatic (with sensor) Urinal of jaquar make i/c all accessories to make the urinal completely functional as per direction of Engineer-in-Charge within all leads and lifts . |
| 63 | P/F cast iron man whole standard size as per direction of Engineer-in-Charge within all leads and lifts. |
| 64 | Providing and installing stand for resting the water tank of 1kl capacity made of iron angles 40x40x5 mm including painting to prevent the rusting of iron and all fitting of 15 mm like nipple, union, socket complete in all respect within all leads and lifts as per entire satisfaction of Engineer in chaarge. |
| 65 | Supplying installation testing of 575 watt Cold stainless steel water cooler conforming to ISI-1391= Part-1992 fitted weith hemitaically shielded air compressor as required complete in respects including the cost of wiring and all electrical fitings required as per site of following specifications and make etc. having capacity 80 ltrs. and 5 star rated including cost of p/f of wall mounted voltage stablizer having range 125 Volts to 290 volts. of microtek/ v-guard/ tata voltas make drain pipes etc. complete. TATA VOLTAS/ BLUESTAR make |
| 66 | Supplying installation testing and comissioning of 1.5 Ton split air conditioners of Voltas/Samsung/LG five star rated of conforming to ISI-1391 Part-1992 fitted weith hemitaically shielded air compressor as required complete in respects including the cost of wiring and all electrical fitings required as per site of following specifications and make etc. including cost of following accessories:-i) volatge stablizer having range 130 volts to 300 voltsof microtek/ v-guard/ tata voltas makeii)Copper tube with required insulation material for AC of required length.iii) PVC drain pipes of reuired length and size.iv) Wall mounted stands as per requirements.complete in all respect within all leads and lifts as per entire satisfaction of Engineer in charge. |
| 67 | Taking down submain wiring any type and any size and making good disturbed surface by using cement mortar, white cement, putty etc. and match with existing surfaces of walls, floors etc., complete in all respect within all leads and lifts as per entire satisfaction of Engineer in charge. |
| 68 | Taking down submain wiring any type and any size and making good disturbed surface by using cement mortar, white cement, putty etc. and match with existing surfaces of walls, floors etc., complete all as specified and as directed. |
| 69 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 70 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender