Tender For Construction of Additional Toilet Block At Govt.Sen.Sec.School Purthi
Tender Value
19.76 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
39500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Additional Toilet Block At Govt.Sen.Sec.School Purthi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in fB587:B627classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil includinjg shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawings, design as per the entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, sale tax, GST. malkana and any other taxes imposed by the Government. |
| 2 | Providing and laying cement concrete 1:4: 8 (One cement: Four sand: Eight graded stone aggregate 40mm (forty milimetre) nominal size) and curing complete including cost of form work in foundation and plinth, and as per directions of Engineer - in- Charge |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for foundation, footing, basis of columns etcetra and mass concrete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. |
| 6 | Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement RCC work in:-Columns, pillars posts and struts upto plinth level as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.. |
| 7 | Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement RCC work in:-Columns, pillars posts and struts upto above plinth level upto floor level as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.. |
| 8 | Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government. |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement Mortar 1:4 (1 cement : 4 sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government. |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement Mortar 1:4 (1 cement : 4 sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government. |
| 11 | Providing and laying 25 mm thick kota stone flooring thick base of cement mortar 1:4 (One cement isto Four Sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete, as per specification, approved drawing, design, to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 12 | 12mm (Twelve millimetre) thick cement plaster to ceiling in cement mortar 1:4 ( one cement into Four sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government . |
| 13 | 15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government . |
| 14 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 15 | Providing and applying Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 17 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.Hot finished welded type tubes complete as per direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 18 | Providing and fixing 0.60mm (Zero decimal six zero milimetre) thick prepainted steel sheet in roofing of Tata/Durashine/Reliance/Jindal with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (Rmp) organic coating of 20 (Twenty) microns over 5(Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted self drilling and self tapping screw of size 5.5mm dia (Five point five milimetre diameter) and 55mm (Fifty five milimetre) length with EDPM seal complete with all accessories as required, as per the direction of Engineer-in-Charge, as per HP,PWD specification, approved drawing, design, to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 19 | Providing and fixing ridges or hips 60 cm ( sixty centimetre) in over all with 0.60mm (zero point six zero millimetre) thick prepainted steel sheets ridge ( Factory made) shall be having proper gola/shape of corrugation of steel sheet TATA /shakti or equivalent fixied with galvanized iron J or L hooks, bolts and nut 6mm ( Six millimetre) diametre G.I limpet and bitumen washer and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 20 | Providing and fixing valleys 60 cm ( Sixty centimetre ) in over all with 0.60mm (zero point six zero millimetre) thick prepainted steel sheets ridge ( Factory made) prepainted steel sheets fixied with galvanized iron L or L hooks, bolts and nut 6mm ( six millimetre) diametre G.I limpet and bitumen washer and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 21 | Providing and Laying GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; finishing walls with textured exterior paint of required shade made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 22 | Finishing wall with textureed exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt. |
| 23 | Providing wood work in frames of doors, windows, clear storey windows and other frames wrought frames and fixed in partition second class Deodar wood complete as per HPPWD specifications, approved Drawings, design, to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 24 | Providing and fixing ISI Marked flush door shutters conforming to IS: 2202(Part-I) deorative type,core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws complete as per HPPWD specifications, approved Drawings, design, to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 25 | Providing and fixing 35 mm (Thirty Five milimeters) thick second class deodar wood panelled and glazed or panelled and glazed shutters, for doors, and windows and clerestory windows, including black ennameled iron butt hinges with necessary screws complete as per HPPWD specifications, approved Drawings,design, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 26 | Providing and fixing 300x10 mm (Three Hundred into Ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per HPPWD specifications, approved Drawings, design, to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 27 | Providing and fixing 250x10 mm (two hundred fifty into Ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per HPPWD specifications, approved Drawings, design, to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 28 | Providing and fixing 125 mm (One hundred and Twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per HPPWD specifications, approved Drawings, design, to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 29 | Providing and fixing 100 mm (One hundred millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per HPPWD specifications, approved Drawings, design, to the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 30 | Providing and fixing 300x16 mm ( Three hundred into Sixteen millimetre ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 31 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately as per standard design. to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt |
| 32 | Providing and fixing 15 mm ( Fifteen millimeter ) nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt |
| 33 | Providing and fixing 20 mm ( Twenty millimeter ) nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt |
| 34 | Providing and fixing 25 mm ( Twenty Five millimeter ) nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt |
| 35 | Providing and fixing 75 mm (Seventy Five millimeter) diameter unplasticised PVC (UPVC) soil and waste water pipe (Type B) conforming to IS:13592, including cutting, jointing with PVC solvent cement, finishing the joints smooth, and fixing with suitable clamps/supports at required intervals, complete including testing of the pipeline for water-tightness complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 36 | Providing and fixing 110 mm ( One Hundred & Ten millimeter ) diameter unplasticised PVC (UPVC) soil and waste water pipe (Type B) conforming to IS:13592, including cutting, jointing with PVC solvent cement, finishing the joints smooth, and fixing with suitable clamps/supports at required intervals, complete including testing of the pipeline for water-tightness complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 37 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (bend 87.5°) 75 mm( Seventy Five millimeter) dia complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 38 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (bend 87.5° ) 110 mm( One Hundred and Ten millimeter) dia complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 39 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion plain shoe 75 mm( Seventy Five millimeter) dia complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion plain shoe 110 mm( One Hundred and Ten millimeter) dia complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 41 | Providng and fixing One-piece European Water Closet (EWC) made of white vitreous china, complete with in -built flushin cistern,duroplast slim soft-close seat cover,siphonic jet flushing system, of overall size 650x345x720 mm Catalogue No.SI013247 (Clayton pro or equivalent approved make) including similar all floor fixing bolts, connectors, sealing ,compound,accessories, concealed S-trap, testing, commissioning and making the unit fully functional, including cutting and making good the walls and floors wherever required, complete complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 42 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate includes, royality charges, octroi, sale tax, GST. malkana and any other taxes imposed by the Government. |
| 43 | Providing and fixing PVC connections pipe with brass unions 30 ( Thirty ) cm length 15 mm nominal bore dia complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt. |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm (Six Hundred Thirty into Four Hundred Fifty ) with a pair of 15 mm C.P.brass pillar taps complete as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 45 | Providing and fixing C.P. brass long nose bib cock 15 mm (Fifteen millimeter) nominal bore of approved quality conforming to IS standards and weighing not less than 810 gms. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.. |
| 46 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.. |
| 47 | Providing, supplying and fixing PVC floor trap with effective water seal and 110 mm/100 mm nominal outlet in floor slab/finished surface, including connection to PVC drain pipe with solvent cement/jointing as required, and fixing 304-grade stainless steel grating of approved size and design over the trap, complete with frame, inner and outer cups, supports and making good the surrounding floor, testing for watertight performance, as directed complete as per HPPWD specifications, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. |
| 48 | Providing and fixing 32mm dia. P.V.C.waste pipe for sink or wash basin including P.V.C. waste fittings complete.as per directions of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation all leads, lifts and other incidental complete in all respect. |
| 49 | Providing and fixing Division plate for urinals 600mm x 30mm (Six hundred into thirty millimeters) vitreous china. Cera Make.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt. |
| 50 | Providing and fixing 600mm and 450 mm (Six hundred into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender