Tender For Nrs Medical College & Hospital - Lady Doctors Hostel (Gr. Fl.)- Repair And Renovation Of The Ground Floor Toilet Block For Setting Up Separate Male And Female Toilets For The Lady Police Barrack, Including Ancillary Works Such As Fixing A
Tender Value
3.55 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
12 days left
EMD
7103
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nrs Medical College & Hospital - Lady Doctors Hostel (Gr. Fl.)- Repair And Renovation Of The Ground Floor Toilet Block For Setting Up Separate Male And Female Toilets For The Lady Police Barrack, Including Ancillary Works Such As Fixing A New Collapsible Gate, Wooden Door Etc. During The Fy 2026-2027
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. . |
| 2 | Dismantling all type of plain cement concrete works, stacking serviceable materrials at site and removing rubbish as directed with in a lead of 75 m In ground floor including roof. |
| 3 | (a) upto 150 mm. thick. |
| 4 | a) M.S.or W.I. Ornamental grill of approved design jointscontinuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in groundfloor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. m |
| 5 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessaryholes, chasing etc. in walls, floors etc. and making good damages complete |
| 6 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer'sspecification [Cement to be supplied by the Department] |
| 7 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. |
| 8 | c) 37.5mm thick |
| 9 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. |
| 10 | (i) with 1:6 cement mortar. |
| 11 | (b) 20 mm. thick plaster. Ground Floor |
| 12 | (ii) With 1:4 cement mortar . |
| 13 | (c)10 mm. thick plaster. Gr Floor |
| 14 | Dismantling Chunar stone flooring carefullyincluding removing rubbish to anywhere within alead of 75 m. and stacking the serviceablematerials as directed. |
| 15 | a) In ground floor |
| 16 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick(avg) cement mortar (1:4) in floor, stair & lobby includingpointing in cement slurry with admixture of pigment matchingthe stone shade, including grinding & polishing as perdirection of Engineer - in - charge to match with the existingwork. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0kg/Sq.m] |
| 17 | Taking out Mirzapur or glazed porcelain tiles carefully bychiselling from walls or floor including stacking serviceablematerial as directed |
| 18 | a) In ground floor |
| 19 | Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(D) WallWWiitthh PPoloylmymereirsiesded AdAhdeshievsei v &e Eapnodxy Egproouxyt pogirnotiuntg pointingincluding spacer- 2 mm ( When Tiles are laid over existinghard ready surface)b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick](i) Coloured decorative |
| 20 | Labour for taking out door and window frame including shutter for repair or replacemnt of different part of the frame and refixing the same including mending good all damages complete.(Concrete and brick work for mending damage will be paid separately). |
| 21 | (a) up to area 2.5 sq.m. |
| 22 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). |
| 23 | e) Sal : Malayasian |
| 24 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, includingfitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.(a) 35 mm thick shutters (single leaf) |
| 25 | Anodise aluminium barred/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws:. |
| 26 | (vi) 200 mm long x 10 mm dia. bolt. |
| 27 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:. |
| 28 | (a) With continuous plate base (hexagonal/round rod). |
| 29 | (vii) 150 mm grip x 12 mm dia rod. |
| 30 | (b) Rendring the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5mm thick). |
| 31 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer's specification andas per direction of the EIC. (In Ground Floor)(a) One Coati) Water based interior grade Acrylic Primer |
| 32 | Applying Acrylic Emulsion Paint of approved make and brand on wallsand ceiling including sand papering in intermediate coats including putty(to be done under specific instruction of Superintending Engineer) :(Two coats)i) Standard Quality |
| 33 | (b) Priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 34 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 35 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary. |
| 36 | (a) On timber or plastered surface: . |
| 37 | (1) With super gloss (hi-gloss). |
| 38 | (iv) Two coats (with any shade except white). |
| 39 | (b) On steel or other metal surface: . |
| 40 | (1) With super gloss (hi-gloss). |
| 41 | (iv) Two coats (with any shade except white). |
| 42 | Supplying, fitting and fixing PVC pipes of approved make of of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately). |
| 43 | For Exposed Work PVC Pipes. |
| 44 | 15 mm dia. |
| 45 | For Exposed Work PVC Pipes. |
| 46 | 20 mm. |
| 47 | Supplying, fitting and fixing pillar cock of approved make. |
| 48 | PTMT Pillar Cock-15 mm. (Prayag kor equivalent). |
| 49 | Supplying, fitting and fixing towel rail with two brackets. |
| 50 | C.P. over brass. |
| 51 | 25 mm dia. and 600 mm long. |
| 52 | Supplying, fitting and fixing bib cock or stop cock. |
| 53 | PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm |
| 54 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. |
| 55 | Sink only. |
| 56 | 530mm x 430mm x 180mm. |
| 57 | Wash basin white vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm X 75mm X 75mm wood blocks and C.I. Brackets including two coats of painting of C.I. Brackets. |
| 58 | 450 mm x 300 mm size. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender