Tender For Replacement Of Ahus At Lodhi Road Barat Ghar Under Bm-Ii(E ) Division.
Tender Value
37.64 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
75290
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Ahus At Lodhi Road Barat Ghar Under Bm-Ii(E ) Division.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of the existing Air Handling Unit (AHU) installed in the terrace of Lodhi Road Barat Ghar using heavy labour and chain pulley block system and SITC of factory-built double-skin, floor-mounted horizontal type chilled water Air Handling Unit of capacity 42476 CMH, comprising 45 mm thick panels with thermal break profile, having pre-coated GI sheets of 0.8 mm thickness on both outer and inner surfaces with injected PUF insulation of density not less than 42 kg/m³. The AHU shall be complete with backward curved airfoil blade plug type belt-driven fan suitable for required static pressure, six-row cooling coil (minimum 0.5 mm thickness) with MS headers, aluminium fins on copper tubes and SS end plates with fin spacing of 4–5 fins per cm, filter section with box type pre-filters properly sealed to prevent air bypass, TEFC IE3 rated 20 HP motor suitable for 415±10% volts, 50 Hz, 3-phase AC supply compatible compatible with the existing VFD system, stainless steel (18G) insulated drain pan with proper drain connection, 150 mm dia dial type pressure gauges (2 Nos.), industrial thermometers (2 Nos.) at inlet and outlet of coil, auto air purge valve and necessary vibration isolation arrangements, complete in all respects as per site requirements to ensure efficient performance and smooth operation of the system. |
| 2 | SITC of 100mm BUTTERFLY VALVE (MANUAL) with CI body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water circulation including buy back for old butterfly valve. |
| 3 | SITC of 100mm Y-STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation including insulation & including buy back for old Y strainer |
| 4 | SITC of 100mm BALANCING VALVE WITH BUILTIN MEASURING FACILITY With CI body flanged construction with EPDM coated disc with long pitch With protected out pipe insulation & PN16 pressure rating for chilled/hot water circulation including buy back for old balancing valve. |
| 5 | Dismantling the existing ducts as in where required with the help of Ladder/scaffolding and SITC of new fabricated at site GSS sheet metal rectangular ducting complete with neoprene rubber gaskets,elbowsvanes, hangers, supports etc. complete with 0.8 mm sheet thickness complete as Required at site. |
| 6 | Dismantling of existing XLPE 13mm insulation on various ducts at terrace of lodhi road baratghar with with the help of cutting machine /grinder at various height levels with the help of long ladders , cleaning the duct by scrubbing brushes, making it smooth and pasting of high grade 13mm XLPE mat sheet on the existing new duct with the help of good quality fevicol/sticking material to protect it from birds/animals/insects complete job as per satisfaction of site engineer. |
| 7 | Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded essianene moulded pipe section of density20kg/cu.m after a thick coat of cold setting adhesive(CPRX compound) wrapping with 500g polythene faced essian and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing felt strip(as per IS:1322 as amended up to date)at joints repairing of damage to building etc.as per specifications and as required complete in all respect. 100mm dia.(50mm Thick insulation) |
| 8 | Supplying and Replacement of existing damaged /worn out flexible canvas connection of AHU supply/return air duct with superior quality heavy duty fire retardant type flexible canvas connection including dismantling of unserviceable canvas connection etc complete as required at site. |
| 9 | SITC of volume control dampers in the ducts of AHU of the following sizes800x800mm |
| 10 | 650x650mm |
| 11 | Supplying, installation, testing & commissioning of 5.0 HP Monoblock pump set 3 phase, 440V, 50Hz, 1440 rpm complete with all accessories and dismantling the existing pump set with the help cutting set, welding set connection, testing & commissioning etc. complete as required including making base frame foundation for the pumps with the help of MS C Channel of size 100x50x0.5mm complete in all respect as per satisfaction of engineer in charge |
| 12 | Supplying, fabricating and fixing at site of MS steel staircase of size 12ft height and 2 ft wide for makeup tank made up with 40x40x3 mm MS angle irons & 40x40mm square pipes welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and 2 coats of paint including labour cartage etc complete as required for the following located at the terrace of Lodhi Road Barat Ghar |
| 13 | Providing, fabricating and fixing of platforms of size 9000mm x 600 mm over maintenance purpose made of MS Plate of size 4 mm thickness painted with 2 or more coats including primer etc complete as per satisfaction of engineer in charge |
| 14 | Supplying, fabricating and fixing at site of MS laminated sheds of following size made up with 65x32 mm square pipes and MS laminated sheet welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and 2 coats of paint including labour cartage etc complete as required for the following locations at the terrace. Size of shed : 4500mm X 3000 mm X 2400mm (2 Nos for AHU and 1 No. of pumps ) |
| 15 | Deduct - Credit for retaining the old items from S.No. 1-10 (sno. 11-13) are of new construction Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender