Tender For Construction & Maintenance Of Bridge (1) High Level Bridge Over Local Nala At Chainage 1+035 In Bhomarpani To Bhitar Amda Road, Length - 17.15M, Block - Dumaria, District - East Singhbhum,(2) High Level Bridge Over Local Nala At Chainage 6
Tender Value
4.08 Crore
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
9 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction & Maintenance Of Bridge (1) High Level Bridge Over Local Nala At Chainage 1+035 In Bhomarpani To Bhitar Amda Road, Length - 17.15M, Block - Dumaria, District - East Singhbhum,(2) High Level Bridge Over Local Nala At Chainage 6+700 In Bhomarpani To Bhitar Amda Road, Length - 17.15M, Block - Dumaria, District - East Singhbhum,(3) High Level Bridge Over Local Nala At Chainage 8+730 In Bhomarpani To Bhitar Amda Road, Length - 17.15M, Block - Dumaria, District - East Singhbhum,(4) L025-Burudih School To Kajrikocha Savartola(Length -0.75 Km) ( Block Dumaria).
BOQ
| Sl. No. | Item Description |
| 1 | Details |
| 2 | (1) HIGH LEVEL BRIDGE OVER LOCAL NALA AT CHAINAGE 1+035 IN BHOMARPANI TO BHITAR AMDA ROAD, LENGTH - 17.15m, BLOCK - DUMARIA, DISTRICT - EAST SINGHBHUM,BRIDGE FOUNDATIONS ITEMSE/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Soil (Upto 3m) (Mechanical Means) |
| 3 | E/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Rock (Upto 3m) (Mechanical Means) (Not Require Blasting) |
| 4 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.PCC Grade M-15 |
| 5 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.RCC Grade M-30 |
| 6 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.HYSD Bars in FoundationsFor Detailed Calculation Refer Bar Bending Schedule |
| 7 | BRIDGE SUBSTRUCTURE WORKPlain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Upto 5m) (RCC Grade M-30) |
| 8 | Plain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Above 5m) (RCC Grade M-30) |
| 9 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 10 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specificationsHYSD Bars in SubstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 11 | Back filling behind abutment, wing wall, return wall complete as per drawing and technical specificationsGranular Materials |
| 12 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 13 | Supplying , fitting and fixing in position true to line and level elastomeric bearing conforming to IRC:83 (Part-II) section IX and clause 2005 of Mort&H specification complete including all accessories as per drawing and technical specifications. |
| 14 | BRIDGE SUPERSTRUCTURE WORKRCC Grade M30 Using Batching Plant,Transite Mixer and Concrete Pump.For T Beam SuperstructuresSeparate Calculation Sheet Attached |
| 15 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.HYSD Bars in SuperstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 16 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications |
| 17 | Construction of RCC railing of M25 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. |
| 18 | Drainage Spouts complete as per drawing and Technical specification |
| 19 | PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification |
| 20 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification |
| 21 | Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. |
| 22 | BRIDGE PROTECTION & MISCELLANEOUS WORKSProviding and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. |
| 23 | Plain/Reinfoced Cement concrete in Toe Wall complete as per drawing and technical specifications.PCC Grade M-10 (In Toe Wall) |
| 24 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification |
| 25 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. |
| 26 | Conformatory Boring |
| 27 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges |
| 28 | PMGSY LOGO |
| 29 | Boundary Pillar |
| 30 | RCC RETAINING WALLS 2 METER HEIGHT, 60 METER LENGTHE/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Soil (Upto 3m) (Mechanical Means) |
| 31 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.PCC Grade M-15 |
| 32 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.RCC Grade M-30 |
| 33 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.HYSD Bars in FoundationsFor Detailed Calculation Refer Bar Bending Schedule |
| 34 | Plain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Upto 5m) (RCC Grade M-30) |
| 35 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 36 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specificationsHYSD Bars in SubstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 37 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 38 | APPROACH ROAD, 100 METER LENGTHSetting out etc all complete job as per specification and directioni of E/I SOR NO 1.16 |
| 39 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MoRD by manual means SOR NO. 2.2 |
| 40 | Excavation in cutting in soil by manual means with lead upto 50m Excavation for roadway in soil using manual means for carrying of cut earth to embankment side with a left upto 1.5m and lead upto 50m as per Technical Specification clause 302.3. SOR NO 3.5 |
| 41 | Compacting original ground supporting subgrade : Loosening of the ground upto level of 300mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Table 300.1 and 300.2 for sub grade construction as per Technical Specification Clause 303.5.2 SOR 3.15Earthen portion |
| 42 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 250m as per Technical Specification Clause 301.575% of total Qty (Free Lead) |
| 43 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 250m as per Technical Specification Clause 301.525% of total Qty (Lead upto 250m)) |
| 44 | Gravel/Soil-Aggregate Surface Course (Table 400.3) - Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402 MOORUM SOR NO 4.11(I) |
| 45 | Construction of granular sub-base by providing well graded L.D. Steel Slag material, Spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. under R&D PMGSY Project |
| 46 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,clause1501 of MoRD SOR NO. 6.4 |
| 47 | Panel cutting in concrete pavement in square panels of 1.25Mx1.25M (Maximum panel) sizes sawing in straight line up to 1/3rd depth from surface including labour and hireage of cutting machine inclusive of taxes under R & D projects in PMGSY |
| 48 | MAINTENANCEYEAR 1 |
| 49 | MAINTENANCEYEAR 2 |
| 50 | MAINTENANCEYEAR 3 |
| 51 | MAINTENANCEYEAR 4 |
| 52 | MAINTENANCEYEAR 5 |
| 53 | (2) HIGH LEVEL BRIDGE OVER LOCAL NALA AT CHAINAGE 6+700 IN BHOMARPANI TO BHITAR AMDA ROAD, LENGTH - 17.15m, BLOCK - DUMARIA, DISTRICT - EAST SINGHBHUM,BRIDGE FOUNDATIONS ITEMSE/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Soil (Upto 3m) (Mechanical Means) |
| 54 | E/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Rock (Upto 3m) (Mechanical Means) (Not Require Blasting) |
| 55 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.PCC Grade M-15 |
| 56 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.RCC Grade M-30 |
| 57 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.HYSD Bars in FoundationsFor Detailed Calculation Refer Bar Bending Schedule |
| 58 | BRIDGE SUBSTRUCTURE WORKPlain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Upto 5m) (RCC Grade M-30) |
| 59 | Plain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Above 5m) (RCC Grade M-30) |
| 60 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 61 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specificationsHYSD Bars in SubstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 62 | Back filling behind abutment, wing wall, return wall complete as per drawing and technical specificationsGranular Materials |
| 63 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 64 | Supplying , fitting and fixing in position true to line and level elastomeric bearing conforming to IRC:83 (Part-II) section IX and clause 2005 of Mort&H specification complete including all accessories as per drawing and technical specifications. |
| 65 | BRIDGE SUPERSTRUCTURE WORKRCC Grade M30 Using Batching Plant,Transite Mixer and Concrete Pump.For T Beam SuperstructuresSeparate Calculation Sheet Attached |
| 66 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.HYSD Bars in SuperstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 67 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications |
| 68 | Construction of RCC railing of M25 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. |
| 69 | Drainage Spouts complete as per drawing and Technical specification |
| 70 | PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification |
| 71 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification |
| 72 | Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. |
| 73 | BRIDGE PROTECTION & MISCELLANEOUS WORKSProviding and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. |
| 74 | Plain/Reinfoced Cement concrete in Toe Wall complete as per drawing and technical specifications.PCC Grade M-10 (In Toe Wall) |
| 75 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification |
| 76 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. |
| 77 | Conformatory Boring |
| 78 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges |
| 79 | PMGSY LOGO |
| 80 | Boundary Pillar |
| 81 | RCC RETAINING WALLS 2 METER HEIGHT, 60 METER LENGTHE/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Soil (Upto 3m) (Mechanical Means) |
| 82 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.PCC Grade M-15 |
| 83 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.RCC Grade M-30 |
| 84 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.HYSD Bars in FoundationsFor Detailed Calculation Refer Bar Bending Schedule |
| 85 | Plain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Upto 5m) (RCC Grade M-30) |
| 86 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 87 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specificationsHYSD Bars in SubstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 88 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 89 | APPROACH ROAD, 100 METER LENGTHSetting out etc all complete job as per specification and directioni of E/I SOR NO 1.16 |
| 90 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MoRD by manual means SOR NO. 2.2 |
| 91 | Excavation in cutting in soil by manual means with lead upto 50m Excavation for roadway in soil using manual means for carrying of cut earth to embankment side with a left upto 1.5m and lead upto 50m as per Technical Specification clause 302.3. SOR NO 3.5 |
| 92 | Compacting original ground supporting subgrade : Loosening of the ground upto level of 300mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Table 300.1 and 300.2 for sub grade construction as per Technical Specification Clause 303.5.2 SOR 3.15Earthen portion |
| 93 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 250m as per Technical Specification Clause 301.575% of total Qty (Free Lead) |
| 94 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 250m as per Technical Specification Clause 301.525% of total Qty (Lead upto 250m)) |
| 95 | Gravel/Soil-Aggregate Surface Course (Table 400.3) - Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402 MOORUM SOR NO 4.11(I) |
| 96 | Construction of granular sub-base by providing well graded L.D. Steel Slag material, Spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. under R&D PMGSY Project |
| 97 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,clause1501 of MoRD SOR NO. 6.4 |
| 98 | Panel cutting in concrete pavement in square panels of 1.25Mx1.25M (Maximum panel) sizes sawing in straight line up to 1/3rd depth from surface including labour and hireage of cutting machine inclusive of taxes under R & D projects in PMGSY |
| 99 | MAINTENANCEYEAR 1 |
| 100 | MAINTENANCEYEAR 2 |
| 101 | MAINTENANCEYEAR 3 |
| 102 | MAINTENANCEYEAR 4 |
| 103 | MAINTENANCEYEAR 5 |
| 104 | (3) HIGH LEVEL BRIDGE OVER LOCAL NALA AT CHAINAGE 8+730 IN BHOMARPANI TO BHITAR AMDA ROAD, LENGTH - 17.15m, BLOCK - DUMARIA, DISTRICT - EAST SINGHBHUM,BRIDGE FOUNDATIONS ITEMSE/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Soil (Upto 3m) (Mechanical Means) |
| 105 | E/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Rock (Upto 3m) (Mechanical Means) (Not Require Blasting) |
| 106 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.PCC Grade M-15 |
| 107 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.RCC Grade M-30 |
| 108 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.HYSD Bars in FoundationsFor Detailed Calculation Refer Bar Bending Schedule |
| 109 | BRIDGE SUBSTRUCTURE WORKPlain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Upto 5m) (RCC Grade M-30) |
| 110 | Plain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Above 5m) (RCC Grade M-30) |
| 111 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 112 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specificationsHYSD Bars in SubstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 113 | Back filling behind abutment, wing wall, return wall complete as per drawing and technical specificationsGranular Materials |
| 114 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 115 | Supplying , fitting and fixing in position true to line and level elastomeric bearing conforming to IRC:83 (Part-II) section IX and clause 2005 of Mort&H specification complete including all accessories as per drawing and technical specifications. |
| 116 | BRIDGE SUPERSTRUCTURE WORKRCC Grade M30 Using Batching Plant,Transite Mixer and Concrete Pump.For T Beam SuperstructuresSeparate Calculation Sheet Attached |
| 117 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.HYSD Bars in SuperstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 118 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications |
| 119 | Construction of RCC railing of M25 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. |
| 120 | Drainage Spouts complete as per drawing and Technical specification |
| 121 | PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification |
| 122 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification |
| 123 | Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. |
| 124 | BRIDGE PROTECTION & MISCELLANEOUS WORKSProviding and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. |
| 125 | Plain/Reinfoced Cement concrete in Toe Wall complete as per drawing and technical specifications.PCC Grade M-10 (In Toe Wall) |
| 126 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification |
| 127 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. |
| 128 | Conformatory Boring |
| 129 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges |
| 130 | PMGSY LOGO |
| 131 | Boundary Pillar |
| 132 | RCC RETAINING WALLS 2 METER HEIGHT, 60 METER LENGTHE/W in excavation of foundation. Trenches for bridges with all materials, labour, tools and plants, levelling and ramming the foundation beds, dressing the sides, removing roots, logs, shrubs, and other loose and deleterious materials likely to deteriorate, adequate provision against erosion, water pollution and drainage to keep the site free of water, stacking the excavated soil clear from the edge of excavation, and backfilling the same with approved materials providing light, barrier, danger signals, choukidar, making and maintaining diversion, traffic regulation all complete job as per design/drawing and technical specification and MORT&H specification clause 304 and other relevant clauses and direction of E/I(Excluding cost of dewatering and shoring).Ordinary Soil (Upto 3m) (Mechanical Means) |
| 133 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.PCC Grade M-15 |
| 134 | Plain/Reinfoced Cement concrete in open foundation complete as per drawing and technical specifications.RCC Grade M-30 |
| 135 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.HYSD Bars in FoundationsFor Detailed Calculation Refer Bar Bending Schedule |
| 136 | Plain/Reinfoced Cement concrete in Sub-Structure complete as per drawing and technical specifications.(Upto 5m) (RCC Grade M-30) |
| 137 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 138 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specificationsHYSD Bars in SubstructureFor Detailed Calculation Refer Bar Bending Schedule |
| 139 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 140 | APPROACH ROAD, 100 METER LENGTHSetting out etc all complete job as per specification and directioni of E/I SOR NO 1.16 |
| 141 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MoRD by manual means SOR NO. 2.2 |
| 142 | Excavation in cutting in soil by manual means with lead upto 50m Excavation for roadway in soil using manual means for carrying of cut earth to embankment side with a left upto 1.5m and lead upto 50m as per Technical Specification clause 302.3. SOR NO 3.5 |
| 143 | Compacting original ground supporting subgrade : Loosening of the ground upto level of 300mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Table 300.1 and 300.2 for sub grade construction as per Technical Specification Clause 303.5.2 SOR 3.15Earthen portion |
| 144 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 250m as per Technical Specification Clause 301.575% of total Qty (Free Lead) |
| 145 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 250m as per Technical Specification Clause 301.525% of total Qty (Lead upto 250m)) |
| 146 | Gravel/Soil-Aggregate Surface Course (Table 400.3) - Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402 MOORUM SOR NO 4.11(I) |
| 147 | Construction of granular sub-base by providing well graded L.D. Steel Slag material, Spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. under R&D PMGSY Project |
| 148 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,clause1501 of MoRD SOR NO. 6.4 |
| 149 | Panel cutting in concrete pavement in square panels of 1.25Mx1.25M (Maximum panel) sizes sawing in straight line up to 1/3rd depth from surface including labour and hireage of cutting machine inclusive of taxes under R & D projects in PMGSY |
| 150 | MAINTENANCEYEAR 1 |
| 151 | MAINTENANCEYEAR 2 |
| 152 | MAINTENANCEYEAR 3 |
| 153 | MAINTENANCEYEAR 4 |
| 154 | MAINTENANCEYEAR 5 |
| 155 | L025-Burudih school to kajrikocha savartola(Length -0.75 KM) ( Block Dumaria)-----------Setting Out Pillars --Providing & Fixing of Bench Mark Pillars @ four nos per km as per drawings given and direction of E/I |
| 156 | Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I |
| 157 | Cutting of Trees including Cutting of Trunks, Branches and Removal of Stumps (Lead upto 100m) Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per Technical Specification Clause 201.----Girth above 300 mm to 600 mm |
| 158 | Girth above 600 mm to 900 mm |
| 159 | Girth above 900 mm to 1800 mm |
| 160 | Dismantling of Structures---Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.---I)Plain cement concrete |
| 161 | I) Reinforced cement concrete |
| 162 | Compacting Original Ground :-- Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1. |
| 163 | Construction of subgrade and earthen shoulders with free lead :-- Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with free lead as per Technical Specification Clause 303.1. Avg width |
| 164 | Construction of subgrade and earthen shoulders with lead upto 750m :-- Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 750m as per Technical Specification Clause 303.1. |
| 165 | Excavation in Cutting in Soil by manual means with lead upto 50 m:-- Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3-----Box cutting (For widening and strengthening) where 3.50 & 3.00 M Carriage way. |
| 166 | Construction of embankment with material obtained from road way cutting.------Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 |
| 167 | Construction of Embankment with Material Obtained from Borrow Pits----Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a free lead as per Technical Specification Clause 301.5 |
| 168 | Construction of Embankment with Material Obtained from Borrow Pits.-----Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 250 m as per Technical Specification Clause 301.5 |
| 169 | Granular Sub-base with Well Graded Material (Table 400.1)----- Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader / Tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 170 | Wet Mix Macadam------Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. |
| 171 | Prime Coat--------Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 172 | Tack Coat-----Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 173 | semi-dense Bituminuous concrete------providing and laying semi dense bituminous concrete with 100-200 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminuos binder @ 4.5 to 5 percent of mix and filler transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment. rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Morth specification clause No. 508 complete in all respects. |
| 174 | iii) 200 m stone |
| 175 | Traffic sign-----Providing and fixing of semi reflective cautionary , mandatory and informatory sign board as per IRC :67 made of 1.5 mm thick MS steel duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural road of required shade and colour supported and welded on 47mmx47mmx12swg sheet tube firmly fixed to the ground by mean of properly designed foundation with M15 grade cement concrete 450x450x600 mm ,600mm below ground level as per approved drawing clause 1701.2.2.-----900 mm equilateral & triangle , OR(Curve Board) |
| 176 | 600 mm equilateral & triangle, OR (curve board) |
| 177 | 600 mm circular , OR (Speed limit Board) |
| 178 | 800 mm x 600 mm rectangular, OR (Village Board) |
| 179 | Painting on Concrete/Steel Surfaces with Epoxy Painting two coats-------Painting on Concrete/Steel Surfaces with Epoxy Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701. |
| 180 | Semi-Reflective Traffic signs------Direction and place identification signs more than 0.90 sqm sign board------Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 |
| 181 | Providing and Fixing 'Logo' of PMGSY Project/Citizen Information Board--------Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1-------Providing and Fixing 'Logo' of PMGSY Project |
| 182 | Citizan Information Board As per Drawing |
| 183 | Retro-reflectorised Traffic Signs-------Semi Reflective Traffic Signs up to 0.90 sqm size board ------Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 |
| 184 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.-------Edge Marking (3.75 M C/W) |
| 185 | SLAB CULVERT 1.5M-----------Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
| 186 | Sand Filling in Foundation Trenches as per drawing and technical specification Clause 1108. |
| 187 | Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 188 | Stone masonry work in cement mortar (CM 1:4) in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 602, 603, 604, 1202 & 1203 |
| 189 | Stone masonry work in cement mortar (CM 1:4) in substructure and Kerb complete excluding pointing and plastering as per drawing and technical specifications Clauses 602, 603, 604, 1202 & 1203 |
| 190 | Plain/Reinforced cement concrete(M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 |
| 191 | Providing Bitumen painting over top surface of Abutment cap & inner vertical surface of Dirt Wall including Heating the bitumen & cost of painting brush etc. all complete. |
| 192 | RCC M25 in Deck Slab :-- Providing and laying reinforced cement concrete in superstructure (Deck slab M25) as per drawing and technical specifications Clauses 800, 1205.4, 1205.5 |
| 193 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications |
| 194 | Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight |
| 195 | Stone masonry work in cement mortar 1:3 in parrapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4 |
| 196 | Plaster with cement mortar (1:4 ), 15 mm Thick on brick work in sub-structure as per Technical Specifications Clause 613.4 & 1204. |
| 197 | Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing |
| 198 | CULVERT REPAIRING------Stone masonry work in cement mortar 1:3 in parrapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4 |
| 199 | Plastering with cement mortar (1:4 ) on brick work in sub-structure as per Technical Specifications |
| 200 | Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 |
| 201 | PROTECTION WORK--------Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
| 202 | Providing M10 (PCC 1:3:6) as levelling course in foundation :-- Providing PCC M 10 (1:3:6) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 203 | Stone Masonary in C.M.(1:4) in Foundation :-- Stone masonry work in cement mortar (CM 1:4) in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 602, 603, 604, 1202 & 1203 |
| 204 | Providing concrete for plain/reinforced concrete M-15 in coping over protection wall complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 20 |
| 205 | Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing face complete as per drawing and technical specification |
| 206 | Pointing with cement mortar (1:3) :-- Pointing with cement mortar (1:3) on Stone Masonry work as per drawing and technical specification Clauses 613.3 and 1204 |
| 207 | MAINTENANCE FOR 1ST YEAR |
| 208 | MAINTENANCE FOR 2ND YEAR |
| 209 | MAINTENANCE FOR 3RD YEAR |
| 210 | MAINTENANCE FOR 4TH YEAR |
| 211 | MAINTENANCE FOR 5TH YEAR |
| 212 | GST @ 18% |
| 213 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender