Tender For Development Of Industrial Estate At Drass Kargil (By Way Of Electrification Owner Estate Manager Office Drass Work (Under Sdp)
Tender Value
5.04 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Industrial Estate At Drass Kargil (By Way Of Electrification Owner Estate Manager Office Drass Work (Under Sdp)
BOQ
| Sl. No. | Item Description |
| 1 | Sub Head-1 |
| 2 | Internal Electrification |
| 3 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Make Havells life line life guard /Polycab) |
| 4 | Group A |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. |
| 6 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 7 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 8 | 2 X 6 Sq.mm + 1 X 4 Sq.mm earth Wire (Single Phase) |
| 9 | 2X 10 sq. mm + 1 X 6 sq. mm earth wire (Single Phase) |
| 10 | Sub Head-2 |
| 11 | Supply, installation,Testing & commissioning of Internal lighting fixtures |
| 12 | Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD < 10 % ,p.f.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. |
| 13 | 15W LED Surface Down light (Room,Corridors) (Make Compact,Havells,Crompton,Philips,HI FI Elleys |
| 14 | 10 W LED Surface Down light (Bathrroms)(Make Compact,Havells,Crompton,Philips,HI FI Elleys |
| 15 | 2x2 36 W LED Surface Ceiling mounted (Conference Hall) (Make Compact,Havells,Crompton,Philips,HI FI Elleys |
| 16 | 50W LED Flood light Ip 65 Protection |
| 17 | Sub Head-3 |
| 18 | Supply installation of E Fan,C Fan,W Fan |
| 19 | P/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.(Make: Compact/Havells USHA/Bajaj) |
| 20 | S/F of 1200mm sweep 3 blades,energy efficient 5 star ceiling fan complete with assembling of blades,down rod,shackle insulator,canopy etc,including 2 modular stepped type modular fan rugulator. (Make: Compact/Havells/Crompton/Orient/USHA) |
| 21 | Sub Head-4 |
| 22 | Gi Box along with modular base & Cover plates |
| 23 | S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel) |
| 24 | 1 or 2 Module (75 mmX75 mm) |
| 25 | 3 Module (100mmX75mm) |
| 26 | 4 Module (125mmX75mm) |
| 27 | 6 Module (200mmX75mm) |
| 28 | 8 Module (200 mm x 150mm ) |
| 29 | Sub Head-5 |
| 30 | Modular Switches and Sockets |
| 31 | S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel) |
| 32 | 6/10 A switch |
| 33 | 15/16 A switch (2M) |
| 34 | 3 pin,6 amps socket outlet |
| 35 | 6 pin 15/16 A socket outlet |
| 36 | Blank/indicator lamp |
| 37 | Sub Head-6 |
| 38 | MCCB/MCB Distribution Board |
| 39 | Supplying and fixing of following ways surface/recessed mounting vertical type 415V,TPN MCB Distribution board of sheet steel dust protected duly powder painted,inclusive of 200 A Tinned copper bus bar common neutral link earth bar din bar for mounting MCBs (but without MCBs and incommer) as required (Note Vertical type MCB TPDB is normally used where 3 phase outlet are required) (Make: Havells/ V Guard/L&T/ C&S) |
| 40 | 12 Way Double door SP&N (Single Phase) |
| 41 | 10 Way Double door SP&N (Single Phasae) |
| 42 | Sub Head-7 |
| 43 | Miniature Circuit Breaker/RCCB Residual Current Circuit Breaker/Double Pole Miniature Circuit Breaker |
| 44 | S/F of 5 Amps to 63 Amps, 240/415V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: (Make: Havells/C&S/V Guard) |
| 45 | single pole 6/10 A, SP MCB (Havells/V Guard/C&S) |
| 46 | Single pole 16/20 A, SP MCB |
| 47 | Double Pole 2P, 40A, DP MCB |
| 48 | 3 Phase 4P Pole 63A, DP MCB |
| 49 | 100A, 3 Phase C/O Switch |
| 50 | Sub Head-8 |
| 51 | Electrical Heavy PVC Conduit |
| 52 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 53 | Supplying and fixing of MS fan box |
| 54 | Supplying and fixing of 10 x 10 x 10 Cm of Concealed box |
| 55 | Sub Head-9 |
| 56 | Charcoal Salted Copper Plate Earthing Set |
| 57 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 58 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 59 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 60 | Sub Head-10 |
| 61 | Single Phase Energy Meter |
| 62 | AC Static Single phase two wire having DLMS Protocol with optical and additional LPRF PORT,10-30 Amps rating whole current class 1.0 Accurancy as per IS and EC Standard KWH Energy Meter with backlight LCD Display (Make HPL/Scure/Legrand/Schneider) |
| 63 | Sub Head-11 |
| 64 | 100A,Aluminum Busbar Chamber |
| 65 | Supply,carriage at site,installation testing and commissioning of following rating of BusBar Chamber (Wall mounted) in power coated sheet steel enclosure |
| 66 | SITC of 200A 4p,4Way TPN Aluminum BusBar Chamber |
| 67 | Sub Head-12 |
| 68 | DWC HDPE Pipe |
| 69 | Supplying and laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket,bends,couplers etc conforming IS 14930,Part II Complete with fitting and cutting,joining etc.direct in ground (45 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc,complete as required. |
| 70 | 90 mm Dia (OD-90 mm & ID -54 mm nominal |
| 71 | Sub Head-13 |
| 72 | Supply & Laying of Armoured Cable & End Termination |
| 73 | Supply,Laying, Testing& commissioning of under ground cable one metre below ground level covered with sand and R.C.C covers of suitable size as per requirement for mechanical protection to the cable,including necessary connections, digging in all classes of soil and refilling with primary compaction of trenches for following sizes XLPE(E) 11KV insulated ISI marked and of approved make.Aluminium conductor armoured cables suitable for working voltage upto 11000 volts including proper dressing of the cable in an approved manner complete as required and as per specifications. |
| 74 | 3.5 CX 35 Sq.mm Armoured Al,Cable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender