Tender For Repair To Joinery, Roof Sheeting, Wall Panelling, Ceiling, Aluminium Door & Windows & Connecting Misc Wks Etc And Periodical Services To Bldg At Offcers Qtrs At Af Stn Halwara
Tender Value
40 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
21 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Roof Sheeting, Wall Panelling, Ceiling, Aluminium Door & Windows & Connecting Misc Wks Etc And Periodical Services To Bldg At Offcers Qtrs At Af Stn Halwara
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each, complete all as specified and directed. |
| 2 | All as per item No 1 but area not exc 1.5 Sqm each. |
| 3 | Taking down shutter from the frame area exceeding 1 sqm not exceeding 2 sqm each, complete all as specified and directed. |
| 4 | M&L for pressed steel frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc, complete all as specified and directed. |
| 5 | S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, hinges, lock strike plate, hold fast etc, complete all as specified and directed. |
| 6 | M&L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in hold fast, pressed steel frames and back filling of pressed steel frame, complete all as specified and directed. |
| 7 | S&F 35 mm thick factory made IInd class hard wood plain framed panelled shutters with panel of 9 mm BWP commercial ply 12mm thick veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I), kiln seasoned and chemically treated, complete all as specified and directed. |
| 8 | S&F 35 mm thick factory made IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I, complete all as specified and directed. |
| 9 | S&F Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling but single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetand fixing in opening as per specification, complete all as specified and directed. |
| 10 | S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded but wood grain printed PVC sheet used and fixing in the frame and site, complete all as specified and directed. |
| 11 | S&F stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with stainless steel staples, complete all as specified and directed. |
| 12 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples in any type of door/window/ventilators including fixing of new beading if old damaged, complete all as specified and directed. |
| 13 | S&F 100 mm size butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed. |
| 14 | S&F in repair 100 mm size butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed. |
| 15 | S&F floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long complete all as specified and directed. |
| 16 | S&F in repair floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long complete all as specified and directed. |
| 17 | S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed. |
| 18 | S&F in repair aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed. |
| 19 | S&F aluminium handles cast type anodised 150mm long, complete all as specified and directed. |
| 20 | S&F in repair aluminium handles cast type anodised 150mm long, complete all as specified and directed. |
| 21 | S&F 300 mm long aluminum anodised sliding door bolts, aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium, complete all as specified and directed. |
| 22 | S&F in repair 300 mm long aluminum anodised sliding door bolts, aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium, complete all as specified and directed. |
| 23 | S&F mild steel 300mm helical door spring, ordinary rat tail rod door spring , patteren including roller and roller plate complete all as specified and directed. |
| 24 | S&F in repair mild steel 300mm helical door spring, ordinary rat tail rod door spring , patteren including roller and roller plate complete all as specified and directed. |
| 25 | M&L for prepraration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 26 | S&F Powder Coating aluminium frame for doors, windows, (minimum thickness of powder coating 50 micron) ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 27 | S & F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, rubber neoprene packing, handles 2 Nos in each door, tower bolt, hinges, anodised aluminium snap beading screws (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 28 | S & F Powder coating aluminium window and ventilator shutters,side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, rubber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 29 | Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according IS : 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with CP brass stainless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operaton of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 30 | S&F in repair 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination &, fixed with screws to aluminium door, complete all as specified and directed. |
| 31 | S&F 4.8 mm thick sheet glass selected quality plain/ tinted in squares not exc 0.5 sqm each pane fixed with oil putty, complete all as specified and directed. |
| 32 | S & F in repair 18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame work including teak wood lipping 6mm thick on external, complete all as specified and directed. |
| 33 | S& F moulding 1st class HW section area exceeding 6 Sqcm and not exceeding 13 sqcm as in cornices, picture rails and the like, complete all as specified and as directed. |
| 34 | S & F 40 mm flap width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed. |
| 35 | S& F in repair ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 36 | S&F 30 mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both ends and one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed. |
| 37 | S&F Factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames / Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-90 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boky threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/mm, modules of elasticity 900 N/mm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required MS hold fast / lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed.Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e, depth and width of profile shall be acceptable. Variation in profile dimesnsions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 38 | Dismantling of AC / fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings, complete all as specified and as directed. |
| 39 | S&F in repair mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165), complete all as specified and as directed. |
| 40 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws, complete all as specified and as directed. |
| 41 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 42 | Dismantling wrought iron work or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 43 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description, complete all as specified and as directed. |
| 44 | S & F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI, flat 40 x 3 mm size 60mm long and expansion hold fastners 12.5mm dia, 40mm long, complete all as specified and directed. |
| 45 | S & F Gypsum Board 8mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size, complete all as specified and as directed |
| 46 | S&F PVC wall lining consisting of 7-8mm thick hollow printed color PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and as directed |
| 47 | S & F in repair 40 mm flap width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed. |
| 48 | S&F in repair Aluminium (Die cast) Body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 61 to 80 kg, complete all as specified and directed. |
| 49 | Hacking out broken glass (any size shape, thickness, quality or description) from wooden/metal frame glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane, complete all as specified and directed. |
| 50 | M&L Sheet glass 3mm thick ,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 51 | M&L Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 52 | S&F hasp and staple safety type aluminium anodised with mild steel hinges pin including bolt to hinge plate and fixed with screws size 125mm, complete all as specified and directed. |
| 53 | S & F toughned frameless glass door upto 12mm thickness of not excedding 7 sqm each door including all accessories with lock system, complete all as specified and directed. |
| 54 | S&F in repair hasp and staple safety type aluminium anodised with mild steel hinges pin including bolt to hinge plate and fixed with screws size 125mm, complete all as specified and directed. |
| 55 | Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 56 | Material & Labour for rendering 10 mm thick plaster in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and directed. |
| 57 | M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, using WPC all as specified and directed & finished even and smooth without using extra cement, complete all as specified and directed. |
| 58 | M&L rendering 5mm thick on fair faces of ceiling in cement mortar 1:3 finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 59 | M&L prepration of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint, including dark bluecolour of pillar /RCC/brick facia as directed, complete all as specified and directed. |
| 60 | M&L for preparation of new plastered surface of wall and applying two coat of distemper oil emulsion over a coat primer above 2 mm thick plaster of paris putty, on new surfaces, complete all as specified and directed. |
| 61 | M&L Prepration of new surfaces of and applying three coat of white wash on ceiling, complete all as specified and directed. |
| 62 | M&L for preparation of old plastered surfaces and applying one coats of cement base paint or colored on walls, complete all as specified and directed. |
| 63 | M&L for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty all and applying one coat of white wash, complete all as specified and directed. |
| 64 | All as per item No. 63 above but on ceiling, complete all as specified and directed.. |
| 65 | All as per item No. 63 above but one coat of distemper oil emulsion on wall, complete all as specified and directed. |
| 66 | M&L for complete removal of existing treatment of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty all and applying two coat of distemper oil emulsion on wall, complete all as specified and directed. |
| 67 | Material & Labour for complete removal of existing treatment from wall & applying Two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces or old, complete all as specified and directed. |
| 68 | M & L for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 69 | All as per item No.68 above but on steel and iron surfaces. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender