Tender For Repair/ Maintenance Of Wooden Furniture And Steel Furniture And Furniture Painting/ Polishing And Allied Works At Age Charduar Under Ge (N) Tezpur
Tender Value
48.99 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
2 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Wooden Furniture And Steel Furniture And Furniture Painting/ Polishing And Allied Works At Age Charduar Under Ge (N) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : REPAIR/ MAINTENANCE OF WOODEN FURNITURE AND STEEL FURNITURE AND FURNITURE PAINTING/ POLISHING AND ALLIED WORKS AT AGE CHARDUAR UNDER GE (N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8290) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | ALMIRAH STEEL MED WITH SHELVES (Drg No. - FD-243, FD-1032) |
| 3 | Taking out broken damaged handle of almirah steel med with shelves and S&F new brass chromium plated handle of approved quality (Godrej pattern) complete all as specified and directed. |
| 4 | Taking out old unserviceable locks from almirah steel med with shelves and S&F new brass locks of 6 levers with duplicate keys of approved quality complete all as specified and directed. |
| 5 | Repairs of door shutters hinges of almirah steel med with shelves by fixing dislocated hinges by welding. Length of each spot of welding exceeding 2.5 cm but not exc 5 cm, thickness of welding shall not be less than 6mm complete all as specified and directed. |
| 6 | Taking out unserviceable rusted legs of almirah steel med with shelves and S&F new legs made out of MS plain black sheet 1.6mm thick duly welded to bottom of almirah steel med with shelves including red oxide zinc chrome primer |
| 7 | Taking out unserviceable rusted shelves of almirah steel med with shelves and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and directed. |
| 8 | M&L for painting to the almirah steel med with shelves with synthetic enamel paint olive green (internally & externally) two coats by spray painting duly scrapping out old dirt stain etc complete all as specified and directed. |
| 9 | Taking out old unserviceable locking arrangement 3 way and supply & fixing new locking arrangement made out of 10mm dia rod of required length of Almirah Steel Med complete all as specified and directed. |
| 10 | ALMIRAH STEEL LARGE WITH SHELVES (Drg No. - FD-1031) |
| 11 | All as per Item No. 1.01 above but for almirah steel large. |
| 12 | All as per Item No. 1.02 above but for almirah steel large. |
| 13 | All as per Item No. 1.03 above but for almirah steel large. |
| 14 | All as per Item No. 1.04 above but for almirah steel large. |
| 15 | All as per Item No. 1.05 above but for almirah steel large. |
| 16 | All as per Item No. 1.06 above but for almirah steel large. |
| 17 | All as per Item No. 1.07 above but for almirah steel large. |
| 18 | ALMIRAH STEEL LARGE 1/2H 1/2S (Drg No. - FD-1033 & FD/E6/MAP/18) |
| 19 | All as per Item No. 1.01 above but for almirah steel large 1/2H 1/2S |
| 20 | All as per Item No. 1.02 above but for almirah steel large 1/2H 1/2S |
| 21 | All as per Item No. 1.03 above but for almirah steel large 1/2H 1/2S |
| 22 | All as per Item No. 1.04 above but for almirah steel large 1/2H 1/2S |
| 23 | All as per Item No. 1.05 above but for almirah steel large 1/2H 1/2S |
| 24 | All as per Item No. 1.06 above but for almirah steel large 1/2H 1/2S |
| 25 | All as per Item No. 1.07 above but for almirah steel large 1/2H 1/2S |
| 26 | BED HARD STEEL MAP-II (Drag No. - FD/E6/MAP/08®) |
| 27 | Taking out old unserviceable 18/19mm thick prelaminated particle board from Head/ foot board and fixing BWR exterior grade of melamine faced, flat pressed, 03 layered, ISI Marked, both side teak finished shall be screwed to MS strip of size 20x45x5 mm thick to be welded with 18mm MS square pipe |
| 28 | M&L for spray painting for Bed Hard Steel after finishing the surface with two coats of synthetic enamel Black paint complete all as specified and directed. |
| 29 | Taking out old and unserviceable plywood top and S&F new plywood top 12mm thick (7 Ply) Plywood, BWR grade ISI Marked. Top to be fitted with nut and bolt after drilling hole in square tube. complete all as specified and directed. |
| 30 | Removing of unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of 1.6mm wall thickness as per existing shape and size welded between long rails complete all as specified and directed. |
| 31 | Removing of unsv rubber shoe from Bed Hard Steel and fixing of new shoe in replace of it complete all as specified and directed. |
| 32 | BOOK CASE STEEL (Drg No. - FD-1028) |
| 33 | Removing of old damaged glass shutter including lock from book case steel and S&F new sheet glass 4.00mm thick & brass lock of approved quality and repairing of shutter frame glass and rolling accessories before fixing of glass shutter complete all as specified and directed. |
| 34 | Taking out unserviceable rusted shelves of Book Case Steel and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and directed. |
| 35 | M&L for spray painting of complete steel surface inside and outside of book case steel with a coat of synthetic enamel paint (Olive green colour) after complete removal of old paint by scrapping complete all as specified and directed. |
| 36 | Removing of old unserviceable handle of book case steel and S&F new chromium plated handle with nut and bolt of approved quality all as specified and shown on drawing |
| 37 | CHAIR CBTS WITH ARMS (Drg No. - FD-75(m)) |
| 38 | Removing of old broken damaged wooden hand rests of chair CBTS with arm and S&F new two hand rests made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish complete all as specified and directed. |
| 39 | Removing of old broken damaged seat frame of chair CBTS with arm and S/F new seat frame made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish with and including canning with new non-recycled 2mm wide white plastic cane half round oval shaped and beading with 3mm wide plastic cane half round, as per Godrej pattern (double vertical and single diagonal) complete all as specified and directed. |
| 40 | All as per item no 6.02 above but back frame of chair CBTS with arm complete all as specified and directed. |
| 41 | M&L for spray painting to steel frame of chair CBTS with arm with two coats of synthetic enamel paint olive green including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 42 | Removing of old unserviceable rubber shoes from chair CBTS with arms & S&F new rubber shoes of approved quality & fixed at the bottom of legs with screw of chair CBTS with arms complete all as specified and directed. |
| 43 | Removing of old rusted flat iron strip and S&F mild steel FI strip of size 500mmX20mmX3mm & welded to the frame(at bottom) of chair CBTS with arms complete all as specified and directed. |
| 44 | SIDE RACK WITH TRAY STEEL (Drg No. - FD-1023) |
| 45 | Removing of old paints completely by scraping from the entire steel surface of Side rack with tray steel and applying two coats of synthetic enamel paint olive green (internally & externally) by spraying machine |
| 46 | CHAIR COMPUTER/ CHAIR REVOLVING EXECUTIVE (Drg No. - FD/MAP-II/01, TP) |
| 47 | Removing of damaged existing foam cushioned seat of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and directed. |
| 48 | Removing of damaged existing foam cushioned back of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and directed. |
| 49 | Removing of damaged existing PU Arm rests of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and directed. |
| 50 | Removing of damaged existing Tilt Mechanism & Gas Lift height adjustment of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and directed. |
| 51 | Removing of damaged existing coaster wheels of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and directed. |
| 52 | CHAIR VERANDAH (Drg No. - FD-256) |
| 53 | Taking out old u/s plastic cane from chair verandah, electric welding in repair of dislocated MS rod and M&L for spray painting to chair varandah with synthetic enamel paint white two coats including preparation of surface by scrapping, de-rusting old dirt stains etc complete all as specified and directed.. |
| 54 | Recanning the chair verandah with 4mm oval shaped half round white plastic cane at seat and back complete all as specified and directed. |
| 55 | Removing of old unserviceable rubber shoes from chair verandah & S&F new rubber shoes of approved quality & fixed at the bottom of legs of chair verandah complete all as specified and directed. |
| 56 | CHAIR VERANDAH JCO/ ORs (Drg No. - FD/MAP-II/06) |
| 57 | M&L for electric welding in repair of dislocated MS rod and spray painting to chair varandah JCO/OR with synthetic enamel paint white two coats including preparation of surface by scrapping, de-rusting old dirt stains complete all as specified and directed. |
| 58 | Removing of existing u/s plastic seat/back and fixing of new Plastic seat/back of Chair Varandah JCO/OR as per existing size and shape complete all as specified and directed. |
| 59 | Removing of old unserviceable rubber shoes from chair verandah JCO/OR & S&F new rubber shoes of approved quality & fixed at the bottom of legs of chair verandah complete all as specified and directed. |
| 60 | CHAIR WRITING STEEL (Drg No. - FD/E6/MAP-II/12) |
| 61 | Removing of damaged existing foam cushioned seat of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 62 | Removing of damaged existing foam cushioned back of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 63 | Removing of damaged existing PU Arm rests of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 64 | Removing of damaged existing MS Base of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 65 | CHARPOY GI PIPE PLY TOP (Drg No.- FD-220) |
| 66 | Taking out old unserviceable long rails from charpoy GI Pipe and S&F new rails made out of medium grade GI Pipe duly threaded at both ends and fixed complete all as specified and directed. |
| 67 | All as per Item No. 12.01 above but for short rails of charpoy GI Pipe complete all as specified and directed. |
| 68 | All as per Item No. 12.01 above but for leg of charpoy GI Pipe complete all as specified and directed. |
| 69 | All as per Item No. 12.01 above but for GI Elbow 3-way of charpoy GI Pipe complete all as specified and directed. |
| 70 | All as per Item No. 12.01 above but for GI Check nuts of charpoy GI Pipe complete all as specified and directed. |
| 71 | Removing of existing unserviceable plywood top from charpoy GI Pipe, supply and fixing of new 12mm thick (7 Ply) Plywood BWR grade ISI Marked as per existing size and shape complete all as specified and directed. |
| 72 | CHARPOY IP HARD TOP ( Drg No.- FD/Map-II/01 ) |
| 73 | M&L for spray painting for Charpoy IP Hard Top after finishing the surface with two coats of synthetic enamel Black paint complete all as specified and directed. |
| 74 | Taking out old and unserviceable plywood top and S&F new plywood top 12mm thick (7 Ply) Plywood, BWR grade ISI Marked. Top to be fitted with nut and bolt after drilling hole in square tube Complete all as specified and directed. |
| 75 | Removing of unsv rubber shoe from Charpoy IP Hard Top and fixing of new shoe in replace of it complete all as specified and directed. |
| 76 | LOCKER STEEL (Drg No. - FD-1029) |
| 77 | Removing old broken damaged hasp & staples of locker steel and S&F new hasp & staples of size 150 mm long chromium plated to the shutters of locker steel complete all as specified and directed. |
| 78 | Removing old broken handle of locker steel and S&F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel complete all as specified and directed. |
| 79 | Removing old broken hanging rod of locker steel and S&F new hanging rod made out of mild steel 20mm dia chromium plated pipe 500mm long of locker steel complete all as specified and directed. |
| 80 | M&L for spray painting to locker steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 81 | Taking out unserviceable rusted legs of almirah steel med with shelves and S&F new legs made out of MS plain black sheet 1.6mm thick duly welded to bottom of locker steel including red oxide zinc chrome primer complete all as specified and directed. |
| 82 | RACK 6 TIER STEEL (Drg No. FD-1038) |
| 83 | Removing of old paints completely by scraping from the entire steel surface of rack 6 tier steel and applying two coats of synthetic enamel paint olive green (internally & externally) by spraying machine complete all as specified and directed. |
| 84 | Taking out unserviceable rusted shelves of rack steel 6 tier and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and directed. |
| 85 | SHOE RACK STEEL (Drag No. - FD/E6/MAP/02®) |
| 86 | M&L for spray painting for Shoe Rack Steel with two coats of synthetic enamel Black paint after finishing the surface from dust, dirt and after repairing wherever welding is required complete all as specified and directed. |
| 87 | TABLE 900 X600 X 760MM WITH/ WITHOUT DRAWER STEEL (Drg No. - FD-1007 & FD-1008) |
| 88 | Removing of old unserviceable top of table 900 x600 x760 mm steel and S&F new top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19mm x 4 mm teak wood beading all around the top and polishing to wooden surfaces with French polish including preparation of surfaces by scrapping the surface complete all as specified and directed. |
| 89 | M&L for spray painting to steel frame of table 900 x600x 760 mm steel by two coats of synthetic enamelled paint olive green colour including preparation of old painted surfaces by scrapping out old dirt stains etc complete all as specified and directed. |
| 90 | Taking out U/S drawer of table 3'x2' w/Dr steel and S&F new drawer made of 1mm thick complete all as specified and directed. |
| 91 | Removing damaged leg and S&F New leg made 25mm sq conduit pipe of 1.6mm wall thickness complete all as specified and directed. |
| 92 | Removing old unserviceable rubber shoes from the legs of table and S&F new rubber shoes of approved quality and tightly fitted to the bottom of legs complete all as specified and directed. |
| 93 | TABLE BEDSIDE STEEL (Drag No. - FD/E6/MAP/15®) |
| 94 | Removing old u/s prelaminated particle board with all ends and fixing new as existing complete all as specified and directed. |
| 95 | Removing old u/s 20 x 25cm Hardwood stopper and fixing new as existing complete all as specified and directed. |
| 96 | Removing old broken handle and fixing new handle as existing complete all as specified and directed. |
| 97 | Removing old u/s all 18mmx18 guage square pipe and fixing new as existing complete all as specified and directed. |
| 98 | TABLE COMPUTER (Drag No. - FD/E6/MAP/03) |
| 99 | Removing old unserviceable and fixing new frame of computer table made of 25mm square MS pipe wall thickness 1.6mm having bottom support made out of 25 x 50mm rectagular MS pipe of wall thickness 1.6mm. Complete all as specified and directed. |
| 100 | Removing old u/s top, sides, shelves, drawer and tray with 18mm thick pre-laminated particle board and fixing the new as existing. Complete all as specified and directed. |
| 101 | Removing Old u/s nylon buffer legs and fixing new as existing. Complete all as specified and directed. |
| 102 | Removing Old u/s telescopic channel and fixing new as existing. Complete all as specified and directed. |
| 103 | TRESTLE STORE ROOM STEEL (Drg No. - FD-1043) |
| 104 | Removing of old paints completely by scraping from the entire steel surface of Side rack with tray steel and applying two coats of synthetic enamel paint olive green (internally & externally) by spraying machine complete all as specified and directed. |
| 105 | TABLE OFFICE CLERK STEEL (Drg No. - FD-1004) |
| 106 | Removing old broken damaged top of table office clerk steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with 19x4mm teakwood beading all around the top and polishing the wooden surfaces with French polish to the entire satisfaction of Engr-in-Charge subject to minimum two coats including necessary preparation of surfaces complete all as specified and directed. |
| 107 | Removing old unserviceable internal drawer locks from table office clerk steel and S&F new internal locks 40mm 4 lever with duplicate keys of approved quality complete all as specified and directed. |
| 108 | Removing old broken unserviceable drawer of table office clk steel and S&F new one of same size as shown in drawing. |
| 109 | Removing damaged legs and S&F New leg made 25mm sq conduit pipe of 1.6mm wall thickness |
| 110 | Removing old broken unserviceable rubber shoes of table office clerk steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel complete all as specified and directed. |
| 111 | M&L for spray painting to table office clerk steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 112 | TABLE OFFICE OFFICER STEEL (Drg No. - FD-1003) |
| 113 | Removing old broken damaged top of table office officer steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with 19x4mm teakwood beading all around the top and polishing the wooden surfaces with French polish to the entire satisfaction of Engr-in-Charge subject to minimum two coats including necessary preparation of surfaces |
| 114 | Removing old unserviceable internal drawer locks from table office officer steel and S&F new internal drawer locks 40mm, 4 lever with duplicate keys of approved quality complete all as specified and directed. |
| 115 | Removing old broken unserviceable drawer of table office officer steel and S&F new one of same size as shown in drawing. |
| 116 | Removing damaged legs and S&F New leg made 25mm sq conduit pipe of 1.6mm wall thickness complete all as specified and directed. |
| 117 | Removing old broken unserviceable hard rubber shoes of table office officer steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office officer steel complete all as specified and shown on drawing. |
| 118 | M&L for spray painting to table office officer steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 119 | BED PLYWOOD TOP (Drg No. - FD - 246, 247) |
| 120 | Taking out old broken damaged head board frame from bed plywood top and supply & fixing new head board frame made out of 2nd class soft wood. complete all as specified in drawing and directed. |
| 121 | Taking out old broken damaged 4mm thick plywood from both sides of head board and supply & fixing new 4mm thick one side teak veneered plywood pasted with synthetic adhesive on the frame of head board including teakwood beading all around the head board frame complete all as specified in drawing and directed. |
| 122 | All as item No 1.01 here-in-before but foot board frame of bed plywood top complete all as specified and directed. |
| 123 | All as item No 1.02 here-in-before but foot board frame of bed plywood top complete all as specified and directed. |
| 124 | Removed old broken damaged long rails of bed plywood top and supply & fixing new long rails, size 1980x100x35mm, made out of well seasoned 1st class timber Teak/ shisham in the shape & size and fixed on the existing frame of bed plywood complete all as specified in drawing and directed. |
| 125 | Removing of broken damaged decayed short rails of bed plywood top & fixing only short rails made out of old long rails obtained from Serial item No 1.05 above complete all as specified in drawing and directed. |
| 126 | Removing of old broken damaged plywood top from the bed plywood top and supply & fixing new 12mm thick plywood top 7 ply BWR exterior grade commercial type ISI marked complete all as specified in drawing and directed. |
| 127 | Removing of broken damaged decayed leg of bed plywood top and supply & fixing new long legs made out of Ist class teak wood & fixed on the existing head board frame complete all as specified in drawing and directed. |
| 128 | CHAIR DINNING (Drg No. - FD-228 & 279) |
| 129 | Removing of damaged unserviceable parts of chair dinning and supply & fixing the following new parts/ components made out of 1st class well seasoned teakwood complete all as directed & shown on drawing :- |
| 130 | Front leg |
| 131 | Side rail |
| 132 | Back rest |
| 133 | Rear leg |
| 134 | Stiffener long |
| 135 | Stiffener short |
| 136 | Rear/Front rail |
| 137 | Removing of old torn unserviceable cane plastic from chair dinning & recanning the same with 2mm wide white plastic cane half round oval shaped & beading with 3mm wide plastic cane half round. Canning shall be as per Godrej pattern complete all as directed & shown on drawing. |
| 138 | Removing damaged shoes and S&F of new heavy duty nylon shoes complete all as specified and directed. |
| 139 | CHAIR DINING OFFR (Drg No. - FD/MAP-II/04) |
| 140 | Removing of damaged unserviceable parts of chair dinning Offr and supply & fixing the following new parts/ components made out of 1st class well seasoned teakwood complete all as directed & shown on drg :- |
| 141 | Front leg |
| 142 | Side rail |
| 143 | Back rest |
| 144 | Rear leg |
| 145 | Stiffener long |
| 146 | Stiffener short |
| 147 | Rear/Front rail |
| 148 | Removing of old u/s 40D foam from chair dinning offr and supply & fixing new foam with leatheritte cover as per existing complete all as specified and directed. |
| 149 | Removing damaged shoes and S&F of new heavy duty nylon shoes complete all as specified and directed. |
| 150 | CHAIR EASY (Drg No. - FD-229) |
| 151 | Removing of damaged/unserviceable parts/ components of chair easy and supply & fixing following new parts/ components made out of 1st class well seasoned teakwood complete all as directed & shown on drg :- |
| 152 | Front/back rail of seat |
| 153 | Hand rest (Arm) |
| 154 | Front leg |
| 155 | Rear leg |
| 156 | Side rail of seat & back |
| 157 | Removing of old unserviceable cane plastic from seat of chair easy & recanning the same with 2mm wide plastic cane white in colour half round oval shaped a beading of 3mm wide white plastic cane half round oval shaped. Canning shall be as per Godrej pattern complete all as directed & shown on drg. |
| 158 | All as per item No 6.07 above but for back of Chair Easy |
| 159 | Removing damaged shoe and S&F of new heavy duty nylon shoe |
| 160 | CHAIR WRITING (Drg No. - FD-280) |
| 161 | Removing of damaged/broken/unserviceable parts/ components of chair writing as under and supply & fixing new components made out of 1st class well seasoned teakwood complete all as directed & shown on drawing.:- |
| 162 | Side rail of seat |
| 163 | Back rail of seat |
| 164 | Front rail of seat |
| 165 | Front leg |
| 166 | Rear leg |
| 167 | Stiffener long |
| 168 | Stiffener short |
| 169 | Arm (Hand rest) |
| 170 | Back rest |
| 171 | Removing of old unserviceable cane plastic from chair writing & recanning the same with 2mm wide half round oval shaped plastic cane white in colour with a beading of 3mm wide half round oval shaped plastic cane white. Canning shall be done as per Godrej pattern as directed & shown on drg. |
| 172 | Removing damaged shoe and S&F of new heavy duty nylon shoe complete all as specified and directed. |
| 173 | SOFA SET 3 SEATER (Drg No. - FD-281) |
| 174 | Removing of old density less foam cushion of sofa set 3 seater and supply & fixing of new polyurethane foam cushion 550x525x100mm thick 40D duly covered with upholsty fabric/ tapesty cloth with provision of zipper, approved shade/ texture complete all as directed by Engr-in-Charge & shown on drawing. |
| 175 | Removing of old broken damaged hand rest of sofa set 3 seater and supply & fixing new hand rest made out of well seasoned 1st class teakwood complete all as directed & shown on drawing. |
| 176 | All as per item No 8.02 above but for front/ back long rail for seat of sofa set 3 seater |
| 177 | All as per item No 8.02 above but for side rail for seat of sofa set 3 seater |
| 178 | All as per item No 8.02 above but for long rail for back frame of sofa set 3 seater |
| 179 | All as per item No 8.02 above but for side rail for back frame of sofa set 3 seater |
| 180 | All as per item No 8.02 above but for siffener for back/ seat of sofa set 3 seater |
| 181 | Removing of old broken damaged leg of sofa set 3 seater and supply & fixing new legs made out of 65x65x150mm well seasoned teak wood complete all as specified and shown on drawing & directed by Engr-in-Charge. |
| 182 | Removing damaged shoes and S&F of new heavy duty nylon shoes complete all as specified and directed. |
| 183 | SOFA SINGLE SEATER (Drg No. - FD-281) |
| 184 | Removing of old density less foam cushion of sofa Single seater and supply & fixing of new polyurethane foam cushion 550x525x100mm thick 40D duly covered with upholsty fabric/ tapesty cloth with provision of zipper, approved shade/ texture complete all as directed by Engr-in-Charge & shown on drawing. |
| 185 | Removing of old broken damaged hand rest of sofa Single seater and supply & fixing new hand rest made out of well seasoned 1st class teakwood complete all as directed & shown on drawing. |
| 186 | All as per item No 9.02 above but for front/ back long rail for seat of sofa single seater |
| 187 | All as per item No 9.02 above but for side rail for seat of sofa single seater |
| 188 | All as per item No 9.02 above but for long rail for back frame of sofa single seater |
| 189 | All as per item No 9.02 above but for side rail for back frame of sofa single seater |
| 190 | All as per item No 9.02 above but for siffener for back/ seat of sofa single seater |
| 191 | Removing of old broken damaged leg of sofa Single seater and supply & fixing new legs made out of 65x65x150mm well seasoned teak wood complete all as specified and shown on drawing & directed by Engr-in-Charge. |
| 192 | Removing damaged shoes and S&F of new heavy duty nylon shoes complete all as specified and directed. |
| 193 | TABLE DINNING 6 PERS (Drg No. - FD-273 & FD/MAP-II/02) |
| 194 | Removing old unserviceable top of table dinning 6 persons and supply & fix new top made out of 19mm thick pre-laminated particle board bonded with phenol formaldehyde exterior gde including 19x4mm teakwood beading all around the top complete all as directed & shown on drawing. |
| 195 | Removing old unserviceable leg of table dinning 6 persons and supply & fixing new leg of size 740x 60x 60mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws complete all as directed & shown on drawing. |
| 196 | Taking out old unserviceable long rail and supply & fixing new long rail made out of 1st class well seasoned teakwood complete all as directed and shown on drawing. |
| 197 | All as per item No 10.03 above but short top rail complete all as specified and directed. |
| 198 | Removing damaged shoe and S&F of new heavy duty nylon shoe complete all as specified and directed. |
| 199 | TABLE DINNING 8 PERS (Drg No. - FD-273) |
| 200 | Removing old unserviceable top of table dinning 8 persons and supply & fix new top made out of 19 mm thick pre-laminated particle board bonded with phenol formaldehyde exterior gde including 19x4mm teakwood beading all around the top complete all as directed & shown on drawing. |
| 201 | Removing old unserviceable leg of table dinning 8 persons and supply & fixing new leg of size 740x 60x 60mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws complete all as directed & shown on drawing. |
| 202 | Taking out old unserviceable long rail and supply & fixing new long rail made out of 1st class well seasoned teakwood complete all as directed and shown on drawing. |
| 203 | All as per item No 11.03 above but short top rail complete all as specified and directed. |
| 204 | Removing damaged shoe and S&F of new heavy duty nylon shoe complete all as specified and directed. |
| 205 | TABLE WRITING (Drg No. - FD-275) |
| 206 | Removing old unserviceable top of table writing and supply & fixing new top made out of 19mm thick pre-laminated particle board exterior grade phenol formaldehyde one side teak veneered with 4mm teakwood beading all around the top complete all as directed & shown on drawing. |
| 207 | Taking out old unserviceable sides of table writing and supply & fixing new sides made out of 19mm pre-laminated particle board one side teak veneered complete all as directed & shown on drawing. |
| 208 | Removing of old unserviceable shutters of table writing and supply & fixing new shutter made out of 19mm thick pre-laminated particle board one side teak veneered bonded with phenol formaldehyde exterior grade including fixing of new or old serviceable hinges 50mm MS medium weight complete all as directed & shown on drawing. |
| 209 | Taking out old unserviceable drawers from table writing and supply & fixing with new drawers made out of pre-laminated particle board & 1st class well seasoned teakwood for sides & 6mm thick commercial plywood for bottom of drawers complete all as directed & shown on drawing. |
| 210 | Removing of unserviceable mild steel hinges from shutters and supply & fixing mild steel butt hinges 50mm medium weight cold rolled complete all as directed & shown on drawing. |
| 211 | Removing of unserviceable knob from shutters & drawers of table writing and supply & fixing new 35mm round brass knob of approved quality complete all as directed & shown on drawing. |
| 212 | Taking out old unserviceable plywood back of table writing and supply & fixing new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws complete all as directed & shown on drawing. |
| 213 | Taking out old unserviceable leg of table writing and supply & fixing new long leg made out of 1st class teak wood well seasoned complete all as directed & shown on drawing. |
| 214 | Taking out old unserviceable long stiffener of table writing and supply & fixing new long stiffener of table writing complete all as directed & shown on drawing. |
| 215 | Taking out old unserviceable short stiffeners of table writing and supply & fixing new short stiffeners of table writing complete all as directed & shown on drawing. |
| 216 | Removing damaged shoe and S&F of new heavy duty nylon shoe complete all as specified and directed. |
| 217 | TABLE DRESSING GENTS WITH MIRROR (Drg No. - FD-230) |
| 218 | Removing of broken/damaged backside plank of table dressing gents and supply & fixing new back side plank made out of well seasoned teak /shisham wood including 2 Nos key plate complete all as directed and shown on drawing. |
| 219 | Removing of old broken damaged top of table dressing Gents and supply & fixing new top of table dressing gents made out of 12mm thick pre-laminated particle board complete all as directed and shown on drawing. |
| 220 | Removing of old broken damaged bottom plank of table dressing gents and supply & fixing new bottom plank made out of well seasoned teak /shisham wood complete all as directed and shown on drawing. |
| 221 | Removing of old broken damaged sides of table dressing gents and supply & fixing new sides made out of 12mm thick pre laminated particle board one side teak veneered all as specified & directed. |
| 222 | Removing of broken damaged knobs of table dressing gents and supply & fixing new chromium plated 35mm round knob of approved quality complete all as directed and shown on drawing. |
| 223 | Removing of damaged mirror of table dressing gents and supply & fixing new mirror of size 380 x 760 x 5.5mm thick all as per drawing.(Make : Swastik/Gold fish/ Saint Gobain/ Modi guard) |
| 224 | Removing of broken damaged back plywood of mirror of table dressing gents and supply & fixing new plywood BWR gde 6mm thick including fixing of two Nos of Keys plate complete all as directed and shown on drawing. |
| 225 | Removing of broken/damaged drawer of table dressing gents and supply & fixing new drawers made out of well seasoned teak /shisham wood including all components complete all as directed and shown on drawing. |
| 226 | Dressing Mirror Gents MAP-II (FD/E6/MAP/16) |
| 227 | Removing damaged leg of Dressing Mirror Gents and S&F new teak wood leg of 38 x 38mm with 450mm high as per drawing. complete all as directed. |
| 228 | Removing damaged glass shelve of Dressing Mirror Gents and S&F new with 5.5mm thick as per drawing. complete all as directed. |
| 229 | Removing damaged back of Dressing Mirror Gents and S&F new back of 12mm BWR phenol bonded ply with cabinet fixing rawl plug as per drawing. complete all as directed. |
| 230 | Removing damaged mirror of Dressing Mirror Gents and S&F new mirror of same size with 12mm BWR phenol bonded ply backing and proper framing as per drawing. complete all as directed. |
| 231 | Removing damaged top/ bottom of Dressing Mirror Gents and S&F new as per drawing. complete all as directed. |
| 232 | Removing damaged side of Dressing Mirror Gents and S&F new as per drawing. complete all as directed. |
| 233 | Table Dressing Ladies w/M (FD-251) |
| 234 | Removing of damaged mirror of table dressing ladies and supply & fixing of new 5.5 mm thick mirror of size 355mm long and 1220mm high free from distortion and other defects Make- Modiguard/ Swastik/ Atul with 6mm thick ply back and frame as per drawing. complete all as directed. |
| 235 | Removing damaged drawers of table dressing ladies and S&F new as per drawing with proper fitting of knobs. complete all as specified in drawing and directed. |
| 236 | Removing damaged sides of table dressing ladies and S&F new as before. complete all as specified in drawing and directed. |
| 237 | Removing damaged back of table dressing ladies and S&F new as before. complete all as specified in drawing and directed. |
| 238 | Removing damaged glass shutters with aluminium channel of table dressing ladies and S&F new as before. complete all as specified in drawing and directed. |
| 239 | Removing damaged long stiffener of frame of leg of table dressing ladies and S&F new as before. complete all as specified in drawing and directed. |
| 240 | All as per item No 15.06 above but for short stiffener of frame of leg of table dressing ladies |
| 241 | Removing damaged legs of table dressing ladies and S&F new as before. complete all as specified in drawing and directed. |
| 242 | TABLE CENTRE (Drg No. - FD-274, FD-29(m) & FD-235) |
| 243 | Removing existing unserviceable top of Table Centre and supply & fixing 18/19 mm thick top of pre-laminated particle board with 4 mm wooden beading all around complete all as directed and shown on drawing. |
| 244 | Removing old unserviceable following components of table Centre and supply & fixing with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc complete all as directed and shown on drawing :- |
| 245 | Long rail |
| 246 | Short rail |
| 247 | Stiffener |
| 248 | Removing damaged shoes and S&F of new heavy duty nylon shoes complete all as specified and directed. |
| 249 | TEAPOY (Drg No. - FD-278, FD-232) |
| 250 | Removing existing unserviceable top of Teapoy and supply & fixing 18/19 mm thick top of pre-laminated particle board with 4 mm wooden beading all around complete all as directed and shown on drawing. |
| 251 | Removing old unserviceable following components of Teapoy and supply & fixing with new components made of 1st class well seasoned teakwood free from knots, cracks, sapwood etc complete all as directed and shown on drawing. :- |
| 252 | Long rail |
| 253 | Short rail |
| 254 | Stiffener |
| 255 | Removing damaged shoes and S&F of new heavy duty nylon shoes complete all as specified and directed. |
| 256 | PEG TABLE (Drg No. - FD-277, FD-236, FD-25) |
| 257 | Removing existing unserviceable top of Peg Table and supply & fixing18/19 mm thick top of pre-laminated particle board with 4 mm wooden beading all around complete all as directed and shown on drawing. |
| 258 | Removing old unserviceable following components of Peg Table and supply & fixing with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc complete all as directed and shown on drawing:- |
| 259 | Long rail |
| 260 | Short rail |
| 261 | Stiffener |
| 262 | Removing damaged shoes and S&F of new heavy duty nylon shoes complete all as specified and directed. |
| 263 | HAT STAND W/MIRROR (Drg No. - FD-233) |
| 264 | Removing old damaged hook of Hat Stand with Mirror and S&F of new hook as shown in drg |
| 265 | Removing old damaged Mirror of Hat Stand with Mirror and S&F of new mirror as shown in drawing |
| 266 | Removing old damaged pegs of Hat Stand with Mirror and S&F of new steel pegs as approved complete all as specified and directed. |
| 267 | Removing old damaged commercial ply of Hat Stand with Mirror and S&F of new mirror as shown in drg |
| 268 | Removing old damaged teak ply of Hat Stand with Mirror and S&F of new mirror as shown in drg |
| 269 | Polishing to all exposed wooden surface of following items of furniture with French polish ( to the entire satisfaction of Engr-in-Charge subject to minimum two coats) after necessary scrapping old stains, dirt complete all as directed by Engr-In-Charge and shown on drawing.:- |
| 270 | Bed plywood top (FD-246) |
| 271 | Chair dining (FD-279) |
| 272 | CHAIR DINING OFFR (FD/MAP-II/04) |
| 273 | Chair easy (FD-229) |
| 274 | Chair writing (FD-280) |
| 275 | Sofa Set 3 seater (FD-281, FD/MAP-II/02) |
| 276 | Sofa Single seater (FD-281, FD/MAP-II/02) |
| 277 | Table dining 6 Persons (FD-273) |
| 278 | Table dining 8 Persons (FD-273) |
| 279 | Table writing (FD-275) |
| 280 | Table dressing gents with mirror (FD-230) |
| 281 | Table dressing ladies with mirror (FD-251) |
| 282 | Table centre (FD-274) |
| 283 | Teapoy (FD-278) |
| 284 | Peg table (FD-277) |
| 285 | Hat Stand w/M Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender