Tender For Repairs To Joinery, Flooring, Internal Water Supply Incl Sanitary Fittings And Ancillary Repairs To Brick Work/Plastering Works To Bldgs Of Od Tech And Adm Area Under Ge Avadi
Tender Value
35 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
19 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Flooring, Internal Water Supply Incl Sanitary Fittings And Ancillary Repairs To Brick Work/Plastering Works To Bldgs Of Od Tech And Adm Area Under Ge Avadi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 3 | M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 4 | M&L Glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm/ 450 x 300 x 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed. |
| 5 | Taking up or down steel water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed. |
| 6 | Taking up or down steel water tubings and connections of 20mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed. |
| 7 | M&L for unplasticised PVC pipes 15mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. |
| 8 | M&L for unplasticised PVC pipes 20mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. |
| 9 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe , all as specified and directed. |
| 10 | S&F in repairs 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), all as specified and directed. |
| 11 | S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed. |
| 12 | S&F in repairs 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed |
| 13 | S & F in repair of two way bib cock/2 in 1 tap PTMT 20 mm bore with wall flange complete all as specified and directed |
| 14 | S&F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 110gms, all as specified and directed. |
| 15 | S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed. |
| 16 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 17 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed all as specified and directed. |
| 18 | S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed |
| 19 | S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed. |
| 20 | S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook (Make Prayag or equivalent) complete all as specified and directed |
| 21 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on PVC moulding and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 22 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 23 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 24 | S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding complete all as specified and directed |
| 25 | S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified and directed |
| 26 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints complete all as specified and directed |
| 27 | S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed |
| 28 | S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) complete all as specified and directed |
| 29 | S&Fin repairs PVC waste pipe 32mm bore complete all as specified and directed |
| 30 | S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed. |
| 31 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed |
| 32 | Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified and directed |
| 33 | S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 34 | S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed. |
| 35 | S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 36 | S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 37 | Removing plants, weeds etc., on chajjas, roofs, walls at any position and at any situation of height up to and including 03 storeys/10m, RCC roof parapets and sparying weed controlling chemical using glyphosate or equivalent in dosages as per manufactures and plastering the surface with CM 1:3 complete all as specified and as directed |
| 38 | Taking down chowkats or frame exc. 1.50 sqm but nexc 4.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and directed |
| 39 | Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed |
| 40 | M & L forming jambs etc to openings (to forgoing items) incl cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work in Cement mortar 1:6 or cement lime mortar 1:1:8 complete all as specified and as directed. |
| 41 | S & F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and directed |
| 42 | S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed. |
| 43 | M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast etc complete all as specified and directed |
| 44 | M & L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified or as directed. |
| 45 | M & L for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm complete all as specified and directed |
| 46 | S & F of 35mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed. |
| 47 | S & F of 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; size of members of shutters as specified in SSR part I, section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and directed. |
| 48 | S & F of 30 mm thick Flush door shutter, solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and as directed. |
| 49 | M & L Preparation of new wood surfaces of any description over 10cm width or girth and priming with pink primer and painting with synthetic enamel painting two coats complete all as specified and directed |
| 50 | Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening incl painting touch up to match with the existing colour complete all as specified and as directed. |
| 51 | S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed complete all as specified and directed |
| 52 | S&F for 200mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 53 | S&F floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed |
| 54 | S & F in repairs 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified & directed. |
| 55 | S&F 150mm size aluminium handles, cast type anodised complete all as specified & directed. |
| 56 | S&F 100mm Butt hinges, extruded aluminium alloy with galavanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed. |
| 57 | Taking down PVC chowkats or frame exc. 1.00 sqm but nexc 2.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and directed |
| 58 | S&F of solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed. |
| 59 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed |
| 60 | S & F of aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed |
| 61 | S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed |
| 62 | S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed |
| 63 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 64 | Taking down Chowkhats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 65 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions complete all as specified and directed |
| 66 | S & F of Anodised aluminium window powder coating of any colour (Thickness or powder coating not less than 50 micron). and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed |
| 67 | Hacking out old broken glass (any size, quality or description) from wooden frames, glazing with putting or beads complete all as specified and directed |
| 68 | Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads complete all as specified and directed |
| 69 | S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 1.0 sqm in each pane complete all as specified and directed |
| 70 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 71 | S&F in repair 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified & directed. |
| 72 | S&F in repair 300 mm long Aluminium sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed complete all as specified and directed |
| 73 | S&F in repair for 200mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 74 | S&F in repair for 150mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 75 | S&F in repairs 150mm size aluminium handles, cast type anodised complete all as specified and directed |
| 76 | S&F in repair floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn rod fixed in floor complete all as directed |
| 77 | S&F in repair for Harrison Curtain rails, mild steel, chromium plated brackets, fixing brackets with rails, stops, rollers etc.in repair all as specified and as directed |
| 78 | Demolition of precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc. complete all as specified and as directed |
| 79 | M & L for precast cement concrete block masonry with solid blocks exc 10 cm in width and set and jointed in C M 1:6 having ratio of PCC 1:3:6 type C1 (using 20mm graded stone aggregate as directed complete all as specified and as directed |
| 80 | Taking down cement plaster of any description from brick wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and as directed |
| 81 | M & L for 15 mm thick plaster in CM (1:6) on brick work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete all as specified and as directed |
| 82 | M & L for 5 mm thick plaster in CM (1:3) on brick work / RCC concrete surfaces of ceilings complete all as specified and as directed |
| 83 | M & L for preparation of newly plastered ceiling surfaces and applied three coats of white wash complete all as specified and as directed |
| 84 | M & L for preparation of newly plastered wall surfaces and Providing and applying 3mm thick wall care putty on wall to prepare the surface even and smooth, including priming plastered and other surfaces with alkali resistant priming paint and Material and labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed |
| 85 | M & L for preparation of old painted surfaces of steel and iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 86 | M & L for preparation of old painted surfaces of wood and wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 87 | Dismantling wrought iron or mild steel work of any description not otherwise provided for grills and grating etc complete all as specified and as directed |
| 88 | S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work on- forming to Fe.290.Gde-E-165 complete all as specified and directed |
| 89 | Dismantling of structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed. |
| 90 | M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 91 | S&F 1.00mm Mild steel, plain, black sheet for covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed |
| 92 | M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
TodayJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender