Tender For Provn Of High Mast Light At Central Ground Of Hrdc And 25 X Solar Lights At Cmdc (Nc) Under Ge (Utilities) Udh Ur.
Tender Value
42.46 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
15 days left
EMD
84914
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of High Mast Light At Central Ground Of Hrdc And 25 X Solar Lights At Cmdc (Nc) Under Ge (Utilities) Udh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Provn of high mast light at central ground of HRDC and 25 x Solar lights at CMDC (NC) under GE (Utilities) Udhampur. Contract No: GE/U-79/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Supply installation testing and commissioning of 16M high mast shaft in two sections with special latching arrangements suitable for 47 m/sec wind speed as per requirement, with head frame, winch mounting bracket, with raising lowering system comprisin double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool ,motor, manual handle, junction box, luminaries carriage suitable to install 08-10 nos 200W Flood light luminaries in symmetrical arrangement, complete all as specified and directed by Engr-in-Charge. Make :- Bajaj & equivalent in GE & Philips .The details of specifications are as under :- |
| 3 | Cross section of Mast : 20 side polygon.Standard for of galvanisation: As per BS EN ISO 1461Size of opening and door at base : 1200 x 250 mmDiameter of base plate : 520 mmThickness of base plate : 25 mmLightning protection finial :G.I single spikeMax.wind speed : 47m/s as per IS : 875 (Part - III)Number of foundation bolts : 6 nos.PCD of foundation bolts : 445 mmType / diameter / length of foundation bolts : TS 600 / 24 mm dia / 850 mm longLUMINAIRES CARRIAGEMaterial of construction: 40 NB ERW Class B - M. S. PipeDiameter of carriage ring (mm) : As per designConstruction : As per designLoad carrying capacity : 8 Luminaire symmetric al |
| 4 | TRAILING CABLEConductor : Copper, 5 core, 2.5 sq mmInsulation : PVC insulatedNo. of circuits per mast : One no. cable per mastWINCH / POWER TOOLType / SWL of winch :Double drum, SWL 350 KgMethod of operation : Integral MotorMotor capacity : 1 HPNo of speeds : 6 Pole, Single speedTorque limitor : With mec hanical tripping facilitySTAINLESS STEEL WIRE ROPEGrade / construction : AISI 304, 7/19 constructionNumber of ropes : Two continuousDiameter (mm) : 5 mmBreaking load capacity : 1350 kg x 2Note :- (a) Erection of High mast including all T & P complete in all respect is included in the quoted rate of the items. (b) RCC/PCC as per manufacturer drawing complete with all respect including excavation & refilling of Pit is inclued in the quoted rate of the items. |
| 5 | Supply and fix foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template etc, complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply and fix Low Intensity Single Dome Aviation Obstruction Light (AOL), ICAO Annex 14 compliant, Type-A/Type-B, LED based, red steady burning light, suitable for marking buildings, communication towers, chimneys, high masts and other structures up to 45 m height. The fitting shall be weatherproof, UV-resistant, maintenance-free, complete with mounting accessories, inbuilt photocell for automatic dusk-to-dawn operation, surge protection, complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply and fix LED flood light, 250/240 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge.Make- \\"PRAZE F 240L WH NB-A5 TG SD MT\\" of Bajaj & equivalent in GE & Philips. |
| 8 | Supplying and laying of XLPE insulated, armoured, Aluminium conductor cable, 1100 volts grade, heavy duty, cross sectional area 25 sq mm 3.5 core, laid in trenches/ducts/through pipe, complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply & laying in replacement DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia of 63 mm and inner dia 50 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable, complete all as specified and directed by Engr-in-Charge. |
| 10 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil, complete all as specified and directed by Engr-in-Charge. |
| 11 | Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick, complete all as specified and directed by Engr-in-Charge. |
| 12 | Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engr-in-Charge. |
| 13 | Design, Supply, installing testing and commissioning factory fabricated In door type totally enclosed LT cubical wall mounted panel board suitable size with busbar, conforming to relevant IS and protection class IP-65 ,dust,vermin and weather proof fabricated out of 3.15mm thick CRCA sheet duly powder coated ,mounted on wall with suitable compartments for controls and Monitors including cable glands for incoming and outgoing cables,locking arrangement, including accomodating, supply and fixing the following accessories/items including necessary internal panel wiring with suitable size of Copper wire PVC insulated & sheathed multi stranded complete all as specified and as directed by Engr-in-charge. Including Supply and fixing the following :- |
| 14 | Incoming :- (a) MCCB 63 Amps 4 Pole -01 No (Incoming) Outgoing :- (a) MCCB 63 Amps -02 Nos. (b) Voltmeter 0-500V with selector switch (Digital type)-01 No.(c) Ammeter 0-50 Amps with CTs (50/5Amps) and selector switch(Digital type)-01 No.(d) Indicating lamps (RYB) -01 Set(e) PCC Foundation (Civil works) for grouting of panel(h) Copper Bus bar 400 Amps. (k) 3 Phase Star- Delta Starter for 01 HP-01 No.(j) Automatic street light control switch of 18-21 KW three phase(40 Amp per phase) having protection IP-66 using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitable rating power contractor (s), one Incoming and three Outgoing MCBs rating of 63AAmps 4 pole 10 KA & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection. The circuit should be also have provision for manual operation (i.e. sensor by pass option), complete all specified & directed by Engr-in-Charge.Make of Timer - Navdeep with smart timer Model no -Navdeep-66-18kw3P/Lauritz Knudsen/ Legrand |
| 15 | Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified LT feeder pillar box (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings MCCBs are to busbar spadles to fitted complete base frame of 50x50x6mm angle iron,powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following :- |
| 16 | Incoming(a) MCCB 400 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA- 1 No, (b) Change Over 400 A with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-01 No, (c) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 1000 Amp,4 pole, not less than 1 MTR long mounted on insulators 01 setOutgoing (a) MCCB 250 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-02No, (b) MCCB 160 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 25 KA-02 No, Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level(iii) Outgoing MCCBs shall be fed with solid busbar connectors(iv) Cables shall be terminated using gun metal /SS glands.(v) including suitable thimbles/lugs, nut bolts ,washers fitted the cables(vi) cable glands for incoming and out going suitable cables is including rate quoted by vendover(vii) 02 No's of Earhing connecting the same panel will be measured and paid separately. |
| 17 | Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 meter below normal ground level with top edge of earth plate at a depth not less than 1.5 meter below normal ground surrounded from all sides by 15 CM thick and packed layer of charcoal dust and common salt filling in alternate layers cleaned connected to and including GI earth strip 32X6 mm size up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 20 mm bore for watering and including funnel wire mesh, RCC pit cover 50 mm thick and PCC chamber pit with PCC 1:3:6 type C-2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 meter) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 all as specified and directed.Note :- Contractor Shall provide earth pit chamber board of 3.15mm thick mild steel sheet of size 45cmX30cm fixed with12mm thick MS rod two nos up to 90 cm height by nuts/bolts including spray painting with two coats of synthetic enamel black paint complete MS sheet both side including writing letters 6cm height i.e Eart pit No, Location, Earthing test Value and date, complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply, install, testing and commissioning of AIO Solar Street Light, luminaire has highly efficient mid power white dimmable LEDs with color temperature 5500-6500 K, . Lumen efficacy of LED not less than 150 lumens/Watt and the lumens output (luminous flux) of luminaire is max 9000 lumens.The luminaire should have intelligent/smart self-diagnosis features with LED indicators for battery charging, deep discharge, load cut-off indication visible from the ground even in the day light. The luminaire should have intelligent/smart self-diagnosis features with LED indicators for battery charging, deep discharge, load cut-off indication visible from the ground even in the day light. The luminaireshould have aluminum housing for ruggedness and excellent heat dissipation with IP65 protection and IK08 impact resistance. Miantenanace lum output 50000 Burning hrs, Operating Temperature Range -10C to 50 C. The Luminarie should have provision of manual intervention in case of black out/war. |
| 19 | Solar Differential Dimming profile :First 0 to 2 Hrs - 100%, Next 2 to 4 Hrs - 60%, Remaining Hrs - 30%. Charge Controller:ON/OFF the luminaire Should happen automatically based on the intelligent Dusk-Dawn feature of the charge controller unlike conventional streetlights. Charge controller efficiency should be > 90% with Battery charging protection & Should come with Inbuilt protections: Battery: Deep discharge, Overvoltage, Reverse Polarity Load: Overload, Open Circuit, Short Circuit PV: Overvoltage, Reverse Polarity, Charging with minimal current.Battery:Rechargeable Lithium Ferro Phosphate Battery (LiFePO4) battery not more than greater than or equal to 691 Wh and its capacity should be designed as such to meet 2 days autonomy and hence should give power to LED load even if not charged for 2 days. Charrging time not more than 1 day. The life cycle of the battery Should be more than 2000 cycles with 90% depth of discharge. The Battery pack Should have inbuilt BMS (Battery Management System with NTC) having safety features like deep discharge protection, overcharge protection, short-circuit protection, low temperature, short-circuit protection, minimum idle mode current and MOS-RDS resistance to minimize the losses. |
| 20 | Solar Panel:Should be made up of high-grade monocrystalline silicon cells with high efficiency and Special dust-repellent coatings on solar panel surface to prevent dust accumulation to enhance energy efficiency by making the panels easier to clean and maintain. Should also comply to IP 65. Solar panel not more than 100Wp (Mono) 18V.Pole :- Octagonal steel tubler pole of 8.5 m height with GI nust, studs, clamps and fiing arrengements as per site requirement .Note :- (a) Earthwork excavation, removal of Soil and PCC 1:2:4,PCC 1:4:8 & PCC 1:3:6Type B1 as in filling/Foundation for fixing of Pole with IP 65 protection complete consisting of the following:- Make of solar light Luminair shall be MNRE aporoved (Ministry of New and Renewable energy) (b) Necessary cut-off point for switch off the solar panel shall provide on the pole at a maximum height of 4 feet above ground level.The rate is included in the quoted rate of the item. |
| 21 | Supply and laying LT UG cable XLPE insulated armored and PVC sheathed 1100 volts grade with aluminium conductor stranded of following sizes all as specified and directed :- |
| 22 | 10 Sqmm 4 core |
| 23 | 16 Sqmm 4 core |
| 24 | Supply & laying in replacement Telerex DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cablecomplete all as specified and as directed by Engr-in-Charge. |
| 25 | Material and labour for terminal box made out of SMC with hinged door and locking arrangements of size 260x260x 150mm, including Backlite 4 way connector,M.S. Clamps suitable for pole ,PCC/MS/GI/rail etc. with bolt, nut and washer ,electrical connections including MCB TPN 6-32 Amps complete all as specified and as directed by Engr-in-Charge. |
| 26 | Supply, Install, Test and Commissioning of LT street light panel outdoor type fabricated out of 3.15 mm thick CRCA sheet double door type IP-65, CPRI approved of size 600X600X300 mm complete with powder coating with seven tank process mounted on M.S angle Iron frame of size 40x40x6mm, duly grouted with PCC reqd. with the following:-Incoming(i) Automatic street light control switch of 18-21 KW three phase(40 Amp per phase) having protection IP-66 using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitable rating power contractor (s), one Incoming and three Outgoing MCBs rating of 63AAmps 4 pole 10 KA & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection. The circuit should be also have provision for manual operation (i.e. sensor by pass option) complete all as specified and directed. Note – (i) 02 Nos (one on each door panel ) with minimum four number combination lock has has to be fixed in the panel. The rate of the padlocks are included in the quoted rate of the panel. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender