Tender For Special Repair Of Building No T-173, T-174, T-175 And T-176 At Old Cw Line Under Ge (West) Bareilly
Tender Value
1.10 Crore
Estimated cost
Bid Submission
04 Aug 2026
24 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Building No T-173, T-174, T-175 And T-176 At Old Cw Line Under Ge (West) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPECIAL REPAIR OF BUILDING NO T-173, T-174, T-175 AND T-176 AT OLD CW LINE UNDER GE (WEST) BAREILLY Contract No : CWE / BLY / GE(W) /43 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 3 | M&L for Prepainted galvalume aluminium zinc coating, G.I. based corrugated steel sheet, 0.50 mm thick (total coated thickness) of any colour, having tensile strength of 550 MPA as in roof covering/ wall cladding, fixed with low carbon self tapping screw & EPDM washers all as per manufacturer's instructions etc complete all as specified and directed. |
| 4 | M&L for Prepainted galvalume aluminium zinc coating, G.I. based plain steel sheet, 0.50 mm thick (total coated thickness) of any colour, having tensile strength of 550 MPA as in Ridge/Valley/Gutter fixed with low carbon self tapping screw & EPDM washers all as per manufacturer's instructions etc complete all as specified and directed. |
| 5 | All as per above item but as in Eaves board etc complete all as specified and directed. |
| 6 | M&L for Steel work such as wind ties for roof including securing bolts all as specified and as directed |
| 7 | M&L for E-board False ceiling consisting of powder coated GI wall angle, main T and cross T of (25mmX 25mm) X 1.40mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed. |
| 8 | Dismantling Timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed. |
| 9 | M&L for Steel work in tubular trusses,purlins,and base plate including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed. |
| 10 | M&L for vitrified ceramic tiles coloured shade 8mm to 10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, including dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises including dismantling of floor or wall tiles including cement morter complete all as specified and directed. |
| 11 | All as per above item No 9 but on verticle surfaces over 10 mm thick plaster in CM (1:4) all as spd and completed |
| 12 | M&L for non skid ceramic coloured tiles Edge cut (7 to 8) mm thick (Square) area of each tiles exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM (1:6), including dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises including dismantling of floor or wall tiles including cement morter complete all as specified and directed. |
| 13 | M&L for Glazed coloured ceramic tiles (600x300)mm x 7mm thick in vertical surface of wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM (1:4), including dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises including dismantling of floor or wall tiles including cement morter complete all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and as directed |
| 15 | M&L for 18 to 20mm thick Granite black collour (table rubbed and polished) as in windows cill & cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging including moulding as per requirment complete all as spd as directed |
| 16 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed. |
| 17 | M&L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed. |
| 18 | Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed |
| 19 | M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging complete all as specified and directed . |
| 20 | M&L for cement concrete type D2,1:4:8 (using 20 mm graded stone aggregate) as in mass concrete complete all as specified and directed |
| 21 | Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed |
| 22 | M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintel/Roof beam and chajja including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items). |
| 23 | S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves,Chajjas including support over lungs etc also splays between floor and beams etc. completed all as specified and directed. |
| 24 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and as directed. |
| 25 | S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia stirrups,spaces and binders all as specified and as directed. |
| 26 | M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) inclding demolition of brick work or stone/ boulder masnonry built in cement mortar complete all as specified and as directed |
| 27 | M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as specified and as directed. |
| 28 | M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) newly surface even and smooth without using extra cement and necessary scaffolding all as specified and as directed. |
| 29 | M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 200 ml per 50 kg of cement including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed,Note :- WPC shall not be paid separately for this item. |
| 30 | M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 200 ml per 50 kg of cement newly surface even and smooth without using extra cement and necessary scaffolding all as specified and as directed. Note :- WPC shall not be paid separately for this item. |
| 31 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed |
| 32 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed |
| 33 | S&F for (125x60)mmx2mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 34 | S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . |
| 35 | S&F 35mm thick factory Glazed and skeleton shutters, open rebated of saal wood second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.(Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 36 | S&F for 1.2 mm thick aluminum anodised campsule mesh aperture not more than 1 cm fixing with screw in the door for protection of mosquito wire mesh and all as spd and directed. |
| 37 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 38 | S & F 140 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring as specified and directed by Engineer-in-Charge. |
| 39 | S & F Solid Prelam PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing |
| 40 | S&F 30 mm thick factory made one side Prelam PVC sheet other side decorative (door shutter) used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 41 | S&F in repairs factory made PVC Cupboard frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing. |
| 42 | S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge. |
| 43 | S&F PVC boards 18 to 20 mm thick any colour/ prelaminated as in cabinets incl sshelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc. |
| 44 | S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame : 92x38mmx2.0mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 20mmx39mmx2.0mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. Note : Rate for glass and wire shall not be paid separately. |
| 45 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including glazing clips, rubder packing and joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) |
| 46 | S&F 5 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane all as specified and directed. |
| 47 | S&F of 4 mm thick frosted glass, cut to shape and size n exc. 0.50 sqm in each pane fixed in aluminium frame or louver complete all as specified and as directed |
| 48 | S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed. |
| 49 | S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed completed all as specified and directed. |
| 50 | S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 51 | S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and as direced. |
| 52 | S&F 300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed. |
| 53 | S&F 300mm long stainless steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as spd and directed. |
| 54 | S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed. |
| 55 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors incl taking down of exising GI line incl cutting chiseling for pipe line and making good by filing with cement mortar1:4 complete all as specified or as directed. |
| 57 | S&F for 20 mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors incl taking down of exising GI line incl cutting chiseling for pipe line and making good by filing with cement mortar1:4 complete all as specified or as directed. |
| 58 | S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy 15 mm dia CP pillar tap, 32 mm diaCP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge. |
| 59 | S&F in repair fancy type 125mm size brass CP shower rose all as specified. |
| 60 | S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed. |
| 61 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type 60 mm long between flange complete all as specified and as directed. |
| 62 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 63 | S&F in repair fancy type brass chromium plated soap dish any type of 160x160x90 mm fixed to plugs with chromium plated brass screw complete all as specified and as directed.. |
| 64 | S&F in repair fancy type chromium plated brass angle/stop valve type suitable for 15mm bore pipe complete all as specified. |
| 65 | S&F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and as directed. |
| 66 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 67 | S&F in repairs 15 mm bore 2 in 1 chromium plated wall mixture with connection for shower arragement complete all as specified and directed. |
| 68 | S&F in repair Vitreous china wash down water closet pen (padestal pattern) white complete incl connection to drain pipe and to flushing pipe anti syphonage pipe etc complete all as specified and as directed. |
| 69 | S & F Plastic water closet white seat, black cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 70 | S&F in repairs health faucet 1 mtr SS Braided connection tube with wall hook complete for ETWC incl necessary fitting complete all as specified and directed. |
| 71 | S & F in repair water jet of EWC chromium plated with PVC connection complete all as specified and directed |
| 72 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed |
| 73 | S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. |
| 74 | S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting including of taking down of old pipe complete all as specified and directed by Engr-in-charge. |
| 75 | S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting including taking down old PVC pipecomplete all as specified and directed. |
| 76 | S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed. |
| 77 | S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed. |
| 78 | S&F designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified |
| 79 | S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type curtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed |
| 80 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 81 | M&L for preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof anti-fungal and anti- algae paint using airless spray technology of operating single spray gun and paint usage over high quality exterior wall primer inclding a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and as mentioned in PS and accessories for applying weather proof paint should be able to spray in hard to reach areas and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 83 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology of operating single spray gun and paint usage over a coat of 1.5 mm thick layer of wall care putty and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 84 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 m in depth, getting out in soft/loose soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and as directed |
| 85 | Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed. |
| 86 | Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 87 | M&L for 150 mm bore reinforced concrete pipes class NP-2, laid and jointed complete with collars layring over concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested all as specified and directed |
| 88 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in channels/benching of manhole, laid to shape and slope and surfaces finished even and smooth using extra cement, complete including all form work etc all as specified and directed. |
| 89 | M&L for rendering 15 mm thick on fair faces of brick (internal faces of manholes ST in CM 1:4 mixed with water proofing compouind where ever required in proportion as per manufacturer's instructions, including finishing the surfaces even & smooth without using extra cement complete all as specified and directed. |
| 90 | Supply only integral water proofing compound (powder) complete all as specified and directed. |
| 91 | M&L providing pre cast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks covers including all form work and setting in CM 1:4 all as specified and shown on drgs |
| 92 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 93 | M&L for Brickwork with fly ash brick in CM 1:4 straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 94 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregrate) mass concrete as in coping, kerb complete all as specified and as directed. |
| 95 | Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced) 150mm dia set in cement mortar complete all as specified and directed. |
| 96 | Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching complete all as specified and directed. |
| 97 | M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone agg in sub base flooring complete all as specified and directed. |
| 98 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 99 | M&L for providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 100 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 101 | Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified and directed. |
| 102 | Taking down submain wiring including all accessories complete all as specified and directed. |
| 103 | Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:-(a) One light / fan/ exhaust fan point controlled by one switch. |
| 104 | (b) One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and directed. |
| 105 | (c) One 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and directed. |
| 106 | (c) One buzzer/ bell point controlled by one push button on the same board with other switches or independent complete all as specified and directed. |
| 107 | All as per item 102 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductor complete all as specified and directed. |
| 108 | S&F Modular switch one way 6 A, 1 Module complete all as specified and directed. |
| 109 | S&F Modular switch one way 16 A, 1 Module complete all as specified and directed. |
| 110 | S&F Modular bell push 6 Amp, 1 module complete all as specified and directed. |
| 111 | S&F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 112 | S&F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 113 | S&F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed. |
| 114 | S&F ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed. |
| 115 | M&L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and directed. |
| 116 | S&F in replacement LED mirror light fitting of 10 Watt LED batten with aluminium housing with all accessories prewired suitable for wall/ surface mounting with connection complete all as specified and as directed. |
| 117 | S&F in replacement LED mirror light fitting of 20 Watt LED batten with aluminium housing with all accessories prewired suitable for wall/ surface mounting with connection complete all as specified and as directed. |
| 118 | S&F indoor decorative LED City-3 light fitting suitable for & including single 12 Watt LED lamp with polycarbonate body with upper globe complete all as specified and directed. |
| 119 | S&F LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. |
| 120 | S&F buzzer, ding dong AC 230 volts, single pole complete all as specified and directed. |
| 121 | S&F security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete withM&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. |
| 122 | M&L for sub main wiring with two single core 6.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 123 | Taking down carefully ceiling fan from existing site and carry out servicing by opening the motor , removing/ cleaning the dust from complete body , oiling greasing complete incl one coat of white enamel paint including hanging the same, complete fan and lovers.wall or as reqd at site complete all as specified and directed. |
| 124 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 125 | M & L for Hole cutting in wall for fixing of exhaust fan of size 300 mm and good the disturbed surfacres of wall by using putty and match with existing colour of wall complete all as specified and directed.Note:Cost of repairing work and material ( cement and sand) included in quoted rate. |
| 126 | S&F MCB SPN 40 Amp 240 volt complete all as specified and directed. |
| 127 | S&F MCB SP 6 to 32 Amp 240 volt B curve 10kA complete all as specified and directed. |
| 128 | Supply and fix flush sheet metal enclosure SPN DB 12 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed. |
| 129 | Supply and fix TPN DB -TPN DB 4 way with provn and including of MCCB 63 Amps , 415 Volt, 3 Phase, 4 wire AC 50 Hz having aluminium Bas Bar phase and the neutral insulated with PVC sleeves, connected with appropriate size copper thimbles. |
| 130 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP 40 to 100 AMP current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by the Engr-in-Charge. |
| 131 | Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed |
| 132 | Taking down carefully service connections of any description from pole, wall or service brackets etc including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 133 | Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 3.5 core complete all as specified and directed. |
| 134 | Removing surplus excaveted soil to a distance n exc 50 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 135 | M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed. |
| 136 | M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as specified and directed. |
| 137 | S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG cables laid to walls or in floors or along with poles etc complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender