Tender For Repair To Roof Treatment, Chajja Repair And Allied Works In Officers Enclave, Tmq Area & Tech Area At 24 Ed Af Stn Manauri.
Tender Value
14.90 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
20 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roof Treatment, Chajja Repair And Allied Works In Officers Enclave, Tmq Area & Tech Area At 24 Ed Af Stn Manauri.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Mud in roofs, any thickness, including plastering and leeping ( where full thickness recovered or only a part thereof disposal of rubbish upto a ditance n. exc. 100m complete all as specified and diected |
| 2 | Removing of surplus excavated/ dimolised materials to a distance exc. 50 m but n exc. 1.5Km away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed Note: Demolised material should not be thrown away on the ground from the top of roof, it should be removed from the roof by manually or by any mechanical means. |
| 3 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out wetting, grouting with cement and sand slurry 1:3 complete all as specified. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors,roof and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-charge. |
| 5 | M&L for PCC1:2:4 type B-0 using 12.5mm graded stone aggregate , as in roof curving, padding,coping with mixing of WPC as per manufacturer instruction etc complete all as specified and directed by Engr-in-charge. WPC shall be measuredand paid separatly. |
| 6 | supply only liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 7 | M&L for 15mm thick rendering in CM (1:3) on edges of RCC chajja or corners of columns where steel reinforcement coming out after fixing 15mm size wire netting of mild steel wire 1.60 mm dia fixed with tinned tacks of wire staples including taking down of old plaster complete all as specified and directed. |
| 8 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 9 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed. |
| 10 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge |
| 11 | M & L rendering 15 mm thick in cement plaster 1 : 4 with WPC (@ 3%by weight of cement) on fair faces of brick wk or concrete surface finishing the surface even and smooth without using extra cement.Note:- WPC shall be measured & paid seprately. |
| 12 | M & L for preparation of new surface of wall including cornices and apply two coat of cement based paint over a coat of primer etc complete all as specified and directed by Engineer-in-Charge. |
| 13 | M & L preparation of roof treatment of APP polymeric water proofing membrane all as given below :-(a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed.(b) M & L for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufactures instructions and as directed by Engr-in-Charge.(c) Applying a coat of bituminous primer conforming to IS:3384-1986 @ 0.40 Ltrs/Sqm and allow to dry.(d) Applying and laying 3mm thick APP membrane having weight 3.2 – 3.5 Kg on prepared surface as per manufactures instructions and over laps 10cm and 15cm longitudinal and transverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into grooves on vertical plane and grove sealed with cement mortar 1 :3.(e) Applying two coats aluminium paint over membrane @ 0.20 Kg/Sqm and all as per specification and directed by Engr-in-Charge. |
| 14 | M & L preparation of roof treatment of APP polymeric water proofing membrane with roof tiles all as given below :-(a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed.(b) M & L for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufactures instructions and as directed by Engr-in-Charge.(c) Applying a coat of bituminous primer conforming to IS:3384-1986 @ 0.40 Ltrs/Sqm and allow to dry.(d) Applying and laying 3mm thick APP membrane having weight 3.2 – 3.5 Kg on prepared surface as per manufactures instructions and over laps 10cm and 15cm longitudinal and transverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into grooves on vertical plane and grove sealed with cement mortar 1 :3.(e) Screed bed 15mm thick in CM 1:4 as in beddding layers using 100% coarse sand.(g) M & L for 20-22mm thickmachine cut & polished cement concrete tile factory made set, jointed and pointed in (CM 1:3) and laid over screed bed all including taking down of any type tile complete all as specified and directed by Engr-in-Charge. |
| 15 | M & L preparation of roof treatment of APP polymeric water proofing membrane with roof tiles all as given below :-(a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed.(b) M & L for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufactures instructions and as directed by Engr-in-Charge.(c) Applying a coat of bituminous primer conforming to IS:3384-1986 @ 0.40 Ltrs/Sqm and allow to dry.(d) Applying and laying 3mm thick APP membrane having weight 3.2 – 3.5 Kg on prepared surface as per manufactures instructions and over laps 10cm and 15cm longitudinal and transverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into grooves on vertical plane and grove sealed with cement mortar 1 :3.(e) Screed bed 15mm thick in CM 1:4 as in beddding layers using 100% coarse sand.(g) M & L for 40mm thick brick tiles, set, jointed and pointed in (CM 1:3) and laid over screed bed all including taking down of any type tile complete all as specified and directed by Engr-in-Charge. |
| 16 | Ditto all as per item No 15 above but except brick tiles.Note: Old serviciable brick tiles obtained from dismantling will be use after cleaning,washing and shorting complete all as specified and directed by Engr-in-Charge. |
| 17 | Dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI in roof covering including ridges,valley gutter,and like all as specified and directed by Eng-in-Charge. |
| 18 | S&F 6mm thick Asbestos cement corrugated/semi corrugated sheet in roofs, fixed with L/J type hook or cranked hook bolt and making good to disturb surface etc complete all as specified and directed by Eng-in-Charge. |
| 19 | S&F AC Serrated ridge two pieces adjustable 6mm thick for corrugated or semi corrugated AC sheets fixed all as specified and directed by Eng-in-Charge. |
| 20 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface, all as specified and directed. |
| 21 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge/valley gutter in wall/roof, fixed with self tapping screws as specifiedNote:-Rate are included for opening and refixing in the same position of overlaped corrugated steel sheet in case of valley gutter if required as per site requerement. |
| 22 | S & F 6 mm thick poly carbonate sheet of any shape and size including in roof coverings incl ridges etc complete as specified & directed |
| 23 | Repair of valley gutter joint ,holes filling with M seal all as specified and directed by engineer - in -charge. |
| 24 | S & F in repair PVC (SWR) pipes, single socketed in any length with rubber rings 110mm dia and fixed to wall complete all as specified and directed |
| 25 | S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 26 | S&F in repair PVC (SWR) junction single, (Single T) 110mm bore equal or unequal complete all as specified and directed |
| 27 | S & F in repair PVC (SWR) pipes, single socketed in any length with rubber rings 75mm dia and fixed to wall complete all as specified and directed |
| 28 | S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 29 | S&F in repairs PVC (SWR) junction single, (Single T) 75mm bore equal or unequal complete all as specified and directed |
| 30 | Dismantling wrought iron or mild steel work of any description all as specefied. |
| 31 | M & L for Mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. compete all as specefied and directed by E-in-Charge. (Fe- 410W Grade-E-250 quality A). |
| 32 | M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 33 | Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 15 mm dia pipe complete all as speicified and directed. |
| 34 | Ditto all as per above item but of 20mm bore pipe |
| 35 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 36 | Ditto all as per item No.35 above item but 20mm size Please Enable Macros to View BoQ information |
| 37 | Ditto all as per item No.35 above item but 20mm size Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender