Tender For Repair/ Maintenance Of Steel Furniture And Furniture Painting And Allied Works At Naa Under Ge (N) Tezpur
Tender Value
42.99 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Steel Furniture And Furniture Painting And Allied Works At Naa Under Ge (N) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : REPAIR/ MAINTENANCE OF STEEL FURNITURE AND FURNITURE PAINTING AND ALLIED WORKS AT NAA UNDER GE (N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8285) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | ALMIRAH STEEL MED WITH SHELVES (Drg No. - FD-243, FD-1032) |
| 3 | Taking out broken damaged handle of almirah steel med with shelves and S&F new brass chromium plated handle of approved quality (Godrej pattern) complete all as specified and directed. |
| 4 | Taking out old unserviceable locks from almirah steel med with shelves and S&F new brass locks of 6 levers with duplicate keys of approved quality complete all as specified and directed. |
| 5 | Repairs of door shutters hinges of almirah steel med with shelves by fixing dislocated hinges by welding. Length of each spot of welding exceeding 2.5 cm but not exc 5 cm, thickness of welding shall not be less than 6mm complete all as specified and directed. |
| 6 | Taking out unserviceable rusted legs of almirah steel med with shelves and S&F new legs made out of MS plain black sheet 1.6mm thick duly welded to bottom of almirah steel med with shelves including red oxide zinc chrome primer |
| 7 | Taking out unserviceable rusted shelves of almirah steel med with shelves and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and directed. |
| 8 | M&L for painting to the almirah steel med with shelves with synthetic enamel paint OG (internally & externally) two coats by spray painting duly scrapping out old dirt stain etc complete all as specified and directed. |
| 9 | Taking out old unserviceable locking arrangement 3 way and supply & fixing new locking arrangement made out of 10mm dia rod of required length of Almirah Steel Med complete all as specified and directed. |
| 10 | ALMIRAH STEEL LARGE WITH SHELVES (Drg No. - FD-1031) |
| 11 | All as per Item No. 1.01 above but for almirah steel large. |
| 12 | All as per Item No. 1.02 above but for almirah steel large. |
| 13 | All as per Item No. 1.03 above but for almirah steel large. |
| 14 | All as per Item No. 1.04 above but for almirah steel large. |
| 15 | All as per Item No. 1.05 above but for almirah steel large. |
| 16 | All as per Item No. 1.06 above but for almirah steel large. |
| 17 | All as per Item No. 1.07 above but for almirah steel large. |
| 18 | ALMIRAH STEEL LARGE 1/2H 1/2S (Drg No. - FD-1033 & FD/E6/MAP/18) |
| 19 | All as per Item No. 1.01 above but for almirah steel large 1/2H 1/2S |
| 20 | All as per Item No. 1.02 above but for almirah steel large 1/2H 1/2S |
| 21 | All as per Item No. 1.03 above but for almirah steel large 1/2H 1/2S |
| 22 | All as per Item No. 1.04 above but for almirah steel large 1/2H 1/2S |
| 23 | All as per Item No. 1.05 above but for almirah steel large 1/2H 1/2S |
| 24 | All as per Item No. 1.06 above but for almirah steel large 1/2H 1/2S |
| 25 | All as per Item No. 1.07 above but for almirah steel large 1/2H 1/2S |
| 26 | BED HARD STEEL MAP-II (Drag No. - FD/E6/MAP/08®) |
| 27 | Taking out old unserviceable 18/19mm thick prelaminated particle board from Head/ foot board and fixing BWR exterior grade of melamine faced, flat pressed, 03 layered, ISI Marked, both side teak finished shall be screwed to MS strip of size 20x45x5 mm thick to be welded with 18mm MS square pipe complete all as specified and as directed. |
| 28 | M&L for spray painting for Bed Hard Steel after finishing the surface with two coats of synthetic enamel Black paint complete all as specified and directed. |
| 29 | Taking out old and unserviceable plywood top and S&F new plywood top 12mm thick (7 Ply) Plywood, BWR grade ISI Marked. Top to be fitted with nut and bolt after drilling hole in square tube. complete all as specified and directed. |
| 30 | Removing of unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of 1.6mm wall thickness as per existing shape and size welded between long rails complete all as specified and as directed. |
| 31 | BOOK CASE STEEL (Drg No. - FD-1028) |
| 32 | Removing of old damaged glass shutter including lock from book case steel and S&F new sheet glass 4.00mm thick & brass lock of approved quality and repairing of shutter frame glass and rolling accessories before fixing of glass shutter complete all as specified and as directed. |
| 33 | Taking out unserviceable rusted shelves of Book Case Steel and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and directed. |
| 34 | M&L for spray painting of complete steel surface inside and outside of book case steel with a coat of synthetic enamel paint (Olive green colour) after complete removal of old paint by scrapping complete all as specified and as directed. |
| 35 | Removing of old unserviceable handle of book case steel and S&F new chromium plated handle with nut and bolt of approved quality all as specified and shown on drawing complete all as specified and as directed. |
| 36 | CHAIR CBTS WITH ARMS (Drg No. - FD-75(m)) |
| 37 | Removing of old broken damaged wooden hand rests of chair CBTS with arm and S&F new two hand rests made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish complete all as specified and directed. |
| 38 | Removing of old broken damaged seat frame of chair CBTS with arm and S/F new seat frame made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish with and including canning with new non-recycled 2mm wide white plastic cane half round oval shaped and beading with 3mm wide plastic cane half round, as per Godrej pattern (double vertical and single diagonal) complete all as specified and directed. |
| 39 | All as per item no 6.02 above but back frame of chair CBTS with arm complete all as specified and as directed. |
| 40 | M&L for spray painting to steel frame of chair CBTS with arm with two coats of synthetic enamel paint olive green including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 41 | Removing of old unserviceable rubber shoes from chair CBTS with arms & S&F new rubber shoes of approved quality & fixed at the bottom of legs with screw of chair CBTS with arms complete all as specified and directed. |
| 42 | Removing of old rusted flat iron strip and S&F mild steel FI strip of size 500mmX20mmX3mm & welded to the frame(at bottom) of chair CBTS with arms complete all as specified and directed. |
| 43 | CHAIR CBTS WITHOUT ARM (Drg No. - FD-75(m)) |
| 44 | All as per item No 6.02 here-in before but seat frame of chair CBTS without arm |
| 45 | All as per item No 6.03 here-in before but back frame of chair CBTS without arm. |
| 46 | All as per item No 6.04 here-in before but painting to steel frame of chair CBTS without arm. |
| 47 | All as per item No 6.05 here-in before but chair CBTS without arm . |
| 48 | All as per item No 6.06 here-in before but chair CBTS without arm . |
| 49 | CHAIR COMPUTER/ CHAIR REVOLVING EXECUTIVE (Drg No. - FD/MAP-II/01, TP) |
| 50 | Removing of damaged existing foam cushioned seat of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and as directed. |
| 51 | Removing of damaged existing foam cushioned back of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and as directed. |
| 52 | Removing of damaged existing PU Arm rests of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and as directed. |
| 53 | Removing of damaged existing Tilt Mechanism & Gas Lift height adjustment of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and as directed. |
| 54 | Removing of damaged existing coaster wheels of Chair computer/ chair revolving executive (TP) and supply & fixing of new as per exisisting complete all as specified and as directed. |
| 55 | CHAIR VERANDAH (Drg No. - FD-256) |
| 56 | Taking out old u/s plastic cane from chair verandah, electric welding in repair of dislocated MS rod and M&L for spray painting to chair varandah with synthetic enamel paint white two coats including preparation of surface by scrapping, de-rusting old dirt stains etc complete all as specified and as directed. |
| 57 | Recanning the chair verandah with 4mm oval shaped half round white plastic cane at seat and back complete all as specified and as directed. |
| 58 | Removing of old unserviceable rubber shoes from chair verandah & S&F new rubber shoes of approved quality & fixed at the bottom of legs of chair verandah complete all as specified and as directed. |
| 59 | CHAIR VERANDAH JCO/ ORs (Drg No. - FD/MAP-II/06) |
| 60 | M&L for electric welding in repair of dislocated MS rod and spray painting to chair varandah JCO/OR with synthetic enamel paint white two coats including preparation of surface by scrapping, de-rusting old dirt stains complete all as specified and as directed. |
| 61 | Removing of existing u/s plastic seat/back and fixing of new Plastic seat/back of Chair Varandah JCO/OR as per existing size and shape complete all as specified and as directed. |
| 62 | Removing of old unserviceable rubber shoes from chair verandah JCO/OR & S&F new rubber shoes of approved quality & fixed at the bottom of legs of chair verandah complete all as specified and as directed. |
| 63 | CHAIR WRITING STEEL (Drg No. - FD/E6/MAP-II/12) |
| 64 | Removing of damaged existing foam cushioned seat of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 65 | Removing of damaged existing foam cushioned back of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 66 | Removing of damaged existing PU Arm rests of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 67 | Removing of damaged existing MS Base of chair Writing Offr and supply & fixing of new as per exisisting. complete all as specified and directed. |
| 68 | CHARPOY GI PIPE PLY TOP (Drg No.- FD-220) |
| 69 | Taking out old unserviceable long rail from charpoy GI Pipe and S&F new rails made out of medium grade GI Pipe duly threaded at both ends and fixed complete all as specified and directed. |
| 70 | All as per Item No. 12.01 above but for short rail of charpoy GI Pipe |
| 71 | All as per Item No. 12.01 above but for leg of charpoy GI Pipe |
| 72 | All as per Item No. 12.01 above but for GI Elbow 3-way of charpoy GI Pipe |
| 73 | All as per Item No. 12.01 above but for GI Check nut of charpoy GI Pipe |
| 74 | Removing of existing unserviceable plywood top from charpoy GI Pipe, supply and fixing of new 12mm thick (7 Ply) Plywood BWR grade ISI Marked as per existing size and shape complete all as specified and as directed. |
| 75 | CHARPOY IP HARD TOP (Drg No.- FD/MAP-II/01, CWE/TEZ/FD-04) |
| 76 | M&L for spray painting for Charpoy IP Hard Top after finishing the surface with two coats of synthetic enamel Black paint complete all as specified and directed. |
| 77 | Taking out old and unserviceable plywood top and S&F new plywood top 12mm thick (7 Ply) Plywood, BWR grade ISI Marked. Top to be fitted with nut and bolt after drilling hole in square tube Complete all as specified and directed. |
| 78 | LOCKER STEEL (Drg No. - FD-1029) |
| 79 | Removing old broken damaged hasp & staples of locker steel and S&F new hasp & staples of size 150 mm long chromium plated to the shutters of locker steel complete all as specified and directed. |
| 80 | Removing old broken handle of locker steel and S&F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel complete all as specified and directed. |
| 81 | Removing old broken hanging rod of locker steel and S&F new hanging rod made out of mild steel 20mm dia chromium plated pipe 500mm long of locker steel complete all as specified and directed. |
| 82 | M&L for spray painting to locker steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 83 | Taking out unserviceable rusted legs of almirah steel med with shelves and S&F new legs made out of MS plain black sheet 1.6mm thick duly welded to bottom of locker steel including red oxide zinc chrome primer complete all as specified and as directed. |
| 84 | RACK 6 TIER STEEL (Drg No. FD-1038) |
| 85 | Removing of old paints completely by scraping from the entire steel surface of rack 6 tier steel and applying two coats of synthetic enamel paint olive green (internally & externally) by spraying machine complete all as specified and as directed. |
| 86 | Taking out unserviceable rusted shelves of rack steel 6 tier and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and as directed. |
| 87 | SHOE RACK STEEL (Drag No. - FD/E6/MAP/02®) |
| 88 | M&L for spray painting for Shoe Rack Steel with two coats of synthetic enamel Black paint after finishing the surface from dust, dirt and after repairing wherever welding is required complete all as specified and as directed. |
| 89 | TABLE 900 X600 X 760MM WITH/ WITHOUT DRAWER STEEL (Drg No. - FD-1007 & FD-1008) |
| 90 | Removing of old unserviceable top of table 900 x600 x760 mm steel and S&F new top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19mm x 4 mm teak wood beading all around the top and polishing to wooden surfaces with French polish including preparation of surfaces by scrapping the surface complete all as specified and as directed. |
| 91 | M&L for spray painting to steel frame of table 900 x600x 760 mm steel by two coats of synthetic enamelled paint olive green colour including preparation of old painted surfaces by scrapping out old dirt stains etc complete all as specified and directed. |
| 92 | Taking out U/S drawer of table 3'x2' w/Dr steel and S&F new drawer made of 1mm thick complete all as specified and as directed. |
| 93 | Removing damaged leg and S&F New leg made 25mm sq conduit pipe of 1.6mm wall thickness |
| 94 | Removing old unserviceable rubber shoes from the leg of table and S&F new rubber shoes of approved quality and tightly fitted to the bottom of legs complete all as specified and directed. |
| 95 | TABLE BEDSIDE STEEL (Drag No. - FD/E6/MAP/15®) |
| 96 | Removing old u/s prelaminated particle board with all ends and fixing new as existing |
| 97 | Removing old u/s 20 x 25cm Hardwood stopper and fixing new as existing |
| 98 | Removing old broken handle and fixing new handle as existing |
| 99 | Removing old u/s all 18mmx18 guage square pipe and fixing new as existing |
| 100 | TABLE COMPUTER (Drag No. - FD/E6/MAP/03) |
| 101 | Removing old unserviceable and fixing new frame of computer table made of 25mm square MS pipe wall thickness 1.6mm having bottom support made out of 25 x 50mm rectagular MS pipe of wall thickness 1.6mm. Complete all as specified and directed. |
| 102 | Removing old u/s top, sides, shelves, drawer and tray with 18mm thick pre-laminated particle board and fixing the new as existing. Complete all as specified and directed. |
| 103 | Removing Old u/s nylon buffer legs and fixing new as existing. Complete all as specified and directed. |
| 104 | TABLE DINING OR (Drg No. - FD-165(M)) |
| 105 | Removing old broken damaged top of table dining OR and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white, phenol formal dehyde exterior grade with 19x4mm thick teakwood beading fixed with headless nails all around the top complete all as specified and directed. |
| 106 | Removing old shoe and S&F of new hard rubber shoe. |
| 107 | TABLE OFFICE CLERK STEEL (Drg No. - FD-1004) |
| 108 | Removing old broken damaged top of table office clerk steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with 19x4mm teakwood beading all around the top and polishing the wooden surfaces with French polish to the entire satisfaction of Engr-in-Charge subject to minimum two coats including necessary preparation of surfaces complete all as specified and as directed. |
| 109 | Removing old unserviceable internal drawer locks from table office clerk steel and S&F new internal locks 40mm 4 lever with duplicate keys of approved quality complete all as specified and directed. |
| 110 | Removing old broken unserviceable drawer of table office clk steel and S&F new one of same size as shown in drawing complete all as specified and as directed. |
| 111 | Removing damaged legs and S&F New leg made 25mm sq conduit pipe of 1.6mm wall thickness complete all as specified and as directed by engnr-in-charge. |
| 112 | Removing old broken unserviceable rubber shoes of table office clerk steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel complete all as specified and as directed by engnr-in-charge. |
| 113 | M&L for spray painting to table office clerk steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 114 | TABLE OFFICE OFFICER STEEL (Drg No. - FD-1003) |
| 115 | Removing old broken damaged top of table office officer steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with 19x4mm teakwood beading all around the top and polishing the wooden surfaces with French polish to the entire satisfaction of Engr-in-Charge subject to minimum two coats including necessary preparation of surfaces complete all as specified and as directed by engnr-in-charge. |
| 116 | Removing old unserviceable internal drawer locks from table office officer steel and S&F new internal drawer locks 40mm, 4 lever with duplicate keys of approved quality complete all as specified and as directed by engnr-in-charge. |
| 117 | Removing old broken unserviceable drawer of table office officer steel and S&F new one of same size as shown in drawing complete all as specified and as directed. |
| 118 | Removing damaged legs and S&F New leg made 25mm sq conduit pipe of 1.6mm wall thickness complete all as specified and as directed by engnr-in-charge. |
| 119 | Removing old broken unserviceable hard rubber shoes of table office officer steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office officer steel complete all as specified and shown on drawing complete all as specified and as directed. |
| 120 | M&L for spray painting to table office officer steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed. |
| 121 | TEAPOY VERANDAH MAP (Drg No. - FD/E6/MAP/17) |
| 122 | Removing old broken damaged top of teapoy verandah MAP and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with 19x4mm teakwood beading all around the top and polishing the wooden surfaces with French polish to the entire satisfaction of Engr-in-Charge subject to minimum two coats including necessary preparation of surfaces complete all as specified and as directed. |
| 123 | Removing old broken unserviceable hard rubber shoes of teapoy verandah MAP and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of leg complete all as specified and as directed. |
| 124 | M&L for spray painting to teapoy verandah MAP with synthetic enamel paint black two coats including preparation of surface by scrapping, de-rusting old dirt stains etc complete all as specified and as directed. |
| 125 | CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) |
| 126 | Supply & fixing 18 mm thick pre laminated particle board top including 25 mm hollow steel pipe inserted in 20 mm MS rod welded to frame openable with PVC edging (Hinged on RHS) and screwed complete all as specified and as directed. |
| 127 | Replacement of moulded one piece PVC back and seat complete all as specified and as directed. |
| 128 | Preparation of old steel surface of chair school with hand board and applying one coat of black Japan paint complete all as specified and shown on drawing complete all as specified and as directed. |
| 129 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 130 | Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete. |
| 131 | M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 132 | Supply and fix exhaust fan(ISI Marked), steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers all complete as specified and directed. |
| 133 | S/F steel water tubing 15mm bore 'medium grade' galvanised with all GI fittings (such as bends, elbows, tees, conectors, short pieces, back nuts, unions, caps & plugs etc) fixed complete to wall and ceiling or laid infloor including cutting, threading and testing complete all as specified and directed. |
| 134 | M&L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender