Tender For Maintenance/Repair Of Civil Structure & Flooring Of Ids Berth Of Drydocks At Naval Dockyard Visakhapatnam Under Ge (I) Dm Visakhapatnam.
Tender Value
1.43 Crore
Estimated cost
Bid Submission
04 Aug 2026
25 days left
EMD
2.18 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance/Repair Of Civil Structure & Flooring Of Ids Berth Of Drydocks At Naval Dockyard Visakhapatnam Under Ge (I) Dm Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for removing the existing damaged, peeled out floor treatment of any description (20mm average thickness) by mechanical/ hand tools to expose the concrete surface and disposal of the rubbish from the Naval dock yard complete all as specified and as directed. |
| 2 | M&L for surface preparation of the existing rough surface of concrete (after removal of existing flooring under item No 1 above) by means of mechanical grinding to achieve a rough, coherent substrate having an excellent anchor profile, removing all the loose particles, dirt, etc., clean with high pressure water jet and allow it to dry complete all as specified and as directed. |
| 3 | M&L for crack repairs by widening the cracks 0.25mm to 9mm wide, groove cutting to V shape in existing jetty slabs, cleaning out by removing loose particles by mechanical blower and application of Epoxy based primer Nitoprime 25 to the groove and allow it to dry and application of Epoxy putty Nito VF in the prepared groove after complete drying of the applied primer complete all as specified and as directed.Make : Nitoprime 25 of Fosroc or E-in-C make as approved by GE. |
| 4 | M&L for fixing injection grouting nozzle of suitable size and injecting grouting material, low viscosity epoxy based grouting material Conbextra EP10 or equivalent chemicals manufactured by Sika India Pvt Ltd / Choksey Chemicals Pvt. Lt M/S Mapei Const Product India PVT Ltd M/S Thermax Ltd/ M/S STP / M/S Dr Sunanada / M/S BASF in to the cracks with pressure of 40 psi mechanically including sealing the hole complete all as specified and directed. Note: The rate quoted by the contractor is including Conbextra EP10 epoxy grouting material |
| 5 | M&L for patch repair in concrete surfaces of depth more than 20mm with shrinkage controlled polymer modified fibre reinforced Cementitious patch repair mortar Renderoc SP40 of Fosroc make having a compressive strength of 45 Mpa over a coat of Nitobond SBR on the base surfaces includung taking out the old concrete complete all as specified and as directed.Note : 25 Kg of Renderoc SP40 bag ready to use at site by mixing with water at 4.25 Ltr per bag shall be used for patch repairs in concrete.Make : Renderoc SP40 of Fosroc or E-in-C make as approved by GE. |
| 6 | M&L for application of bonding coat on the prepared old concrete surfaces of the jetty with two component epoxy based bonding agent Nitobond EP of Fosroc make for laying 20mm thick Cementitious flooring system all as specified and as directed.Make : Nitobond EP of Fosroc or E-in-C make as approved by GE. |
| 7 | M&L for 20mm thick cementitious flooring system after application of epoxy based bonding agent on the prepared jetty floor with Nitoflor Levelcrete of Fosroc make having a compressive strength of 40Mpa. The pre-pack 20Kg Nitoflor Levelcrete bag shall be mixed with 4Ltr of water as per manufacturers instructions and thoroughly mixed by mechanical means for application on the floor complete all as specified and as directed. Make : Nitoflor Levelcrete of Fosroc or E-in-C make as approved by GE. |
| 8 | M&L for application of top wearing coat with the properties of Anti-skid, oil resistant, flexible & UV resistant coating system with the following laying methodology :- a) Application of two component Epoxy primer Notoprime 30 of Fosroc make, mixed with mechanical mixer and applied on the level Crete surface by using sponge based epoxy roller followed by sprinkling of anti-slip grain No 2 of Fosroc make on the primed surface on wet condition for skid resistant and allow it to dry for 16-24 hours.b) Application of two component prepacked protective system of Traffic guard Intermediate coat of Fosroc make, mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours.c) Application of two component wearing coat, Trafficguard Wearing coarse of Fosroc make , mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours.Make : Epoxy primer Notoprime 30 of Fosroc or E-in-C make as approved by GE |
| 9 | All as per item No. 8.00 above, but for traffic line marking, 100 wide, over finished flooring to the required length , colour and shapes for parking, safety markings on jetty, hard standings, roads etc., all as specified and as directed. |
| 10 | M&L for preparation of construction joint grooves of size 25 mm X 20 mm, application of primer to the groove, inserting breaker rod in the groove and finally sealing the groove with with Polyuretheane based flooring sealent Colpor 200 of Fosroc make and finishing complete all as specified and as directed. |
| 11 | M&L for preparation of construction joint grooves of size 10mm wide and 6mm deep, application of primer to the groove and sealing the groove with with Polyuretheane based flooring sealent Colpor 200 of Fosroc make and finishing complete all as specified and as directed. |
| 12 | M&L for preparation of surfaces of vertical concrete surfaces of jetty on sea side wall by mechanical scaryfying for key ( partly under sea water during high tide times), removing all loose particles, laitance, oil, greese, sea weed etc., before application of levelling putty complete all as specified and as directed. |
| 13 | M&L for application of single component, polymer modified, cementitious mortar of Rendroc FC (M/s Fosroc) or techno commercial equivalent filler for minor surface imperfections of average thickness 3mm complete all as specified and as directed . |
| 14 | M&L for application of high performance aliphatic acrylate based protective and decorative coating on vertical concrete surfaces of jetty sea face wall with two coats of Deck guard 'S' of Fosroc, 2.85 Sqm per one Ltr (300 microns thick ) over a coat of Deckguard primer @ 2.5 Sqm per one Ltr complete all as specified and as directed. |
| 15 | Demolition of cement concrete of any description not exceeding 15cm thick above or below groundfloor and removing the debries from the Dockyard premises complete all as specified and directed. Please Enable Macros to View BoQ information |
| 16 | Demolition of cement concrete of any description not exceeding 15cm thick above or below groundfloor and removing the debries from the Dockyard premises complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender