Tender For Special Repair To Qtr No. 2, 3 And 4 Of Bldg No P-503 And Allied Works In Sarvatra Vihar Under Ge (Central) Khadki.
Tender Value
23.30 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
19 days left
EMD
46600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Qtr No. 2, 3 And 4 Of Bldg No P-503 And Allied Works In Sarvatra Vihar Under Ge (Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water all as specified and as directed. |
| 2 | Material and labour for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed. |
| 3 | Material and labour 15mm thick rendering on concrete/brick surfaces in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all specified and as directed.NOTE :- WPC measured and paid saperately |
| 4 | Material and labour 5mm thick rendering in cement Mortar 1:3 on concrete surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all specified and as directed. |
| 5 | Material and labour for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed. |
| 6 | Material and labour for preparing newly plastered surfaces of internal wall and applying two coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed. |
| 7 | Material and labour for preparing newly plastered surfaces of external Walls and applying Two Coats of cement Base Paint over a coat of primer complete all as as specified and as directed. |
| 8 | Material and labour for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surface of walls and applying two coats of cement base paint on external wall Priming plastered and other surfaces with alkali resistant priming paint all as specified and as directed. NOTE :- Curing shall be done before and after applying of paint. |
| 9 | Material and labour for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surface of walls and applying two coats of oil bound distempered over 1mm thick wall care putty on wall over priming surafce complete all as specified and as directed |
| 10 | Material and labour for prepration of old surfaces of ceiling includinng scrapping down smoke, soot and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all specified and as directed. |
| 11 | Material and labour for prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of (white or tinted) complete all specified and as directed. |
| 12 | Material and labour for prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all specified and as directed. |
| 13 | Demolition of existing tarfelt any no of layers /plaster/Thermo seal etc in water proofing treatement to roof and cleaning the surface with wire brushes including removal of all dust or dirt etc to the distance outside the defence land complete all as specified and as directed. |
| 14 | Material and labour for PCC 1:2:4 type B-0 (12.5mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 15 | Material and labour for Rendering 10mm thick on concrete surface in cement mortar (1:3) with water proofing compound finishing even and fair without using extra cement as in under layer of roof treatement at any height complete all as specified and as directed. NOTE :- Water proofing compound shall be measured and paid separetely |
| 16 | Applying a coat of bitumen primer @ 0.3kg/Sqm conforming to IS 3384 and laving 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100mm side lap and 150mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2kg per sqm and blinded with clean dry sand @ 0.5kg/Sqm over the APP memebrane complete all as specified and as directed. NOTE :- The water proofing treatement shall be carried out by the Authorised applicator of the manufacturer. |
| 17 | Material and labour for applying two coat of solar reflective bituminious aluminium paint over APP memebrane @ 0.20Kg/Sqm complete all as specified and as directed. |
| 18 | Supply only integral water proofing compound complete all as specified and as directed. |
| 19 | Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and as directed. |
| 20 | Material and labour for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and as directed. |
| 21 | Material and labour for brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 22 | Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 23 | Material and labour vetrified ceremic tiles 10 mm thick, in light SHADE, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and as directed. |
| 24 | Material and labour for Vitriefied ceramic tiles 10mm thick Light SHADE (square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10mm thick complete all as specified and as directed. |
| 25 | Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed. |
| 26 | Material and labour Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 27 | Dismantling of Stone slabs and tiles of any description or thockness , aprons laid bedded and pointes in any mortar complete all as specified and as directed. . |
| 28 | Material and labour for granite (of any type ) 20 mm thick work (table rubbed and polished) in steps, jambs, pilllars, window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 29 | Machine cut cudappha stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 30 | Material and labour for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. to the entire satsfaction complete all as specified and as directed. |
| 31 | Material and labour for mirror polishing on marble/granite/kota stone/stone work whre ever required, to give high gloss finish complete all as specified and as directed. |
| 32 | Material and labour 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed. |
| 33 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area not exc 1.5 Sqm each all complete all as specified and as directed. |
| 34 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and as directed. |
| 35 | Supply and fix pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete as specified and as directed. |
| 36 | Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm |
| 37 | Material and labour PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and as directed. |
| 38 | Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 39 | Material and labour 35 mm thick factory made 2nd class hard wood glazed/gazsed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and as directed. |
| 40 | Supply and fix PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification complete all as specified and as directed. |
| 41 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing, complete all as specified and as directed. |
| 42 | Supply and fix, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and as directed |
| 43 | Supply and fix, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and as directed |
| 44 | Supply and fix, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and as directed. |
| 45 | Supply and fix, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and as directed. |
| 46 | Supply and fix continuos (piano) hinges,mild steel bright finish or electrogalvanised, width of flaps 30 mm all as specified and as directed. |
| 47 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and as directed. |
| 48 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and as directed. |
| 49 | Supply and fix 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and as directed. |
| 50 | Supply and fix 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 51 | Supply and fix 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and as directed. |
| 52 | Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed. |
| 53 | Material and labour for 9 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair complete all as specified and as directed. |
| 54 | Material and labour for 18/19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair all as specified and as directed. |
| 55 | Supply and fix 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 56 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed. |
| 57 | Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and as directed. |
| 58 | Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and as directed. |
| 59 | Supply and fix in repairs mild steel framed work such as guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified and as directed. |
| 60 | Supply and fix aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and as directed. |
| 61 | Supply and fix in repairs for harrison rails mild steeel , Chromium plated with fixing brackets stops rollers (both side) etc, complete all as specified and as directed. |
| 62 | Material and labour for preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 63 | Material and labour for preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer com complete all as specified and as directed. |
| 64 | Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified and as directed. |
| 65 | Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified and as directed. |
| 66 | Supplying and laying of CPVC pipes,20mm (outer Diameter) Dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 67 | Supply and fix Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 68 | Supply and fix Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 69 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 70 | Supply and fix in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and as directed. |
| 71 | Supply and fix in repair 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and as directed. |
| 72 | Supply and fix in repair for 15mm chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and directed. |
| 73 | Supply and fix in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete all as specified and as directed. |
| 74 | Supply and fix sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 75 | Supply and fix soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and as directed. |
| 76 | Supply and fix in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and as directed. |
| 77 | Supply and fix in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and as directed. |
| 78 | Supply and fix in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and as directed |
| 79 | Supply and fix 600x450 bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 80 | Supply and fix in repairs towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and as directed. |
| 81 | Supply and fix in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing complete all as specified and as directed. |
| 82 | Supply and fix in repair plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 83 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 84 | Supply and fix in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and as directed. |
| 85 | Supply and fix in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and as directed. |
| 86 | Supply and fix CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and as directed. |
| 87 | Supply and fix CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and as directed. |
| 88 | Material and labour for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 89 | Material and labour for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 90 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc.including cleaning or refixing or removal to store complete all as specified and as directed. |
| 91 | Supply and fix 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed. |
| 92 | Supply and fix PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and as directed. |
| 93 | Supply and fix 110 mm dia PVC (SWR ) branches piece, double (double Y) equal or unequal with access doorrubber rings ljoits fixed to walls complete all as specified and as directed. |
| 94 | Supply and fix PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and as directed. |
| 95 | Supply and fix 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed. |
| 96 | Supply and fix 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed. |
| 97 | Supply and fix 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and as directed. |
| 98 | Material and labour PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and as directed. |
| 99 | Material and labour PVC(SWR) Tee of 75mm dia access door etc complete all as specified and as directed. |
| 100 | Supply and fix PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified and as directed. |
| 101 | Dismantling water tanks exc 500 and n exc 1000 ltr capacity complete all as specified and as directed. |
| 102 | Supply and fix 1000 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including ball brass valves, high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I complete all as specified and as directed. |
| 103 | Supply and fix 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified and as directed. |
| 104 | Supply and fix 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all specified and as directed. |
| 105 | Supply and fix 25mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all specified and as directed. |
| 106 | Supply and fixing of 18mm thick marine Plywod laminated of any colour with High Glossy acrylic sheet of 3mm thick, grade I as per IS 14587, for frame and shutter for kitchen cabinets including taking down complete all as specified and as directed. |
| 107 | Supply and fixing in repair of medium weight, cold rolled mild steel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self closing complete all as specified and as directed. |
| 108 | Supply and fixing in repair of stainless steel 304 electro-polished for corrosion resistance modular thali holder / basket having of size 42 x 58.5 x 20cm including telescopic drawer channel having weighing capacity of 6kg complete all as specified and as directed. |
| 109 | Supply and fixing in repair of stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder/basket of size 52 x 53.5 x 10cm including telescopic drawer channel having weighing capacity of 4kg complete all as specified and as directed. |
| 110 | Supply and fixing in repair of 200mm length stainless cabinet drawers handelers complete all as specified and as directed. |
| 111 | Supply and fixing in repairs of stainless steel grain trolly SS 304 having size of 525 x 485 x 350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25kg complete all as specified and as directed. |
| 112 | Supply and fixing in repairs of stainless steel plane wire Basket/trolly SS 304 having size of 506 x 480 x 200mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity 25kg complete all as specified and as directed |
| 113 | Supply and fixing in repairs stainless steel modular perforated cuttlery basket SS 304 of size 52 x 48.5 x 10cm with telescopic drawer channel having weighing capacity of 6kg complete all as specified and as directed. |
| 114 | Supply and fixing in repair of stainless steel hanging spice rack having three shelf spaces length of 500mm complete all as specified and as directed. |
| 115 | Supply and fix stack clamps out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc complete all as specified and as directed. |
| 116 | Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. |
| 117 | Material and labour for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and as directed. |
| 118 | One light point controlled by one switch/one fan point /Bell Pointcontrolled by one switch & fan regulator. |
| 119 | One socket outlet three pin, 5 Amps on the same board. |
| 120 | One socket outlet three pin, 5 Amps, independent. |
| 121 | Description all as per item No 117 above but two way light point controlled by two way switch i |
| 122 | Material and labour for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 16 Amps complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 123 | Material and labour for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 16 Amps complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender