Tender For special Repair To Bldg No Tl-70, 07 X Other Single Toilet And Urinal Blocks And Veh R Of 433 Fd Hosp Under Ge (East) At Mil Stn Hisar
Tender Value
24.26 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
15 days left
EMD
48520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No Tl-70, 07 X Other Single Toilet And Urinal Blocks And Veh R Of 433 Fd Hosp Under Ge (East) At Mil Stn Hisar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified and directed. |
| 2 | Taking down chowkat or frame with shutters area exc 1.50 sqm but n exc 4.0sqm without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified and directed. |
| 3 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed. |
| 4 | Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws complete all as specified and as directed. |
| 5 | S&F stainless steel butt hinges of size 100mm medium weight, cold fixed with stainless steel screws complete all as specified and as directed. |
| 6 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised (ISI marked) complete all as specified and as directed. |
| 7 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed. |
| 8 | S&F Aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 9 | S&F Powder coated aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed complete all as specified and as directed. |
| 10 | S&F Powder coated Anodised aluminium windows hunged or sliding shutters and fixed partition, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, tower bolts 02 Nos, handles 02 Nos in each hunged or in sliding shutter, hinges, anodised aluminum snap beading screws etc. including provision for cooler/AC opening wherever neccesary, complete all as specified.Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately. |
| 11 | S&F 4mm thick ACP (Aluminium composite panel) suitable sheet for aluminium door, window, ventilator etc with one or more rebate including jointing cleats, glazing clips, rubber packing, anodised snap beading, screws etc all as specified and directed. |
| 12 | S & F 3 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. |
| 13 | S&F Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 14 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and as directed. |
| 15 | M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all secified and as directed. |
| 16 | M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall including provision of 02 Nos 8mm TMT bars at every fourth course complete all as specified and as directed. |
| 17 | Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. Note: The execution shall be carried out for external surfaces of walls over/under sunshade/projection of roof/window and like and also inside the walls of utility shaft portion by using necessary scafolding and ladder complete all as directed EIC. |
| 18 | Chipping of loose/ damaged / cracked / previously repaired/ delaminated or weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and as directed.Note: The execution shall be carried out for external surfaces of walls over/under sunshade/projection of roof/window and like and also inside the walls of utility shaft portion by using necessary scafolding and ladder complete all as directed by EIC. |
| 19 | M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height up to 3rd floor levels, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and as directed. |
| 20 | M&L for weld-mesh of size 50x50x3mm to be wrapped on the exposed surface of rib of beam, on the slab bottom etc and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture Sika Plasto creat plus or equivalent make in Fosroc / Themax as per manufacturer's instructions as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. The gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions and direction complete all as specified and as directed. |
| 21 | Providing and fixing water tight centering & shuttering and scaffolding including bolting, strutting, propping etc.Including removal of form work from column, beam, slab and chajja etc complete all as specified and as directed. |
| 22 | Supply and apply a ready to use non shrink, cementitious free flow micro-concrete (<100 mm) using Product : SikaRep Microcrete-4 + adequate coarse aggregate, Yield:approx 17 Ltr/bag (30 Kg) (depending on the size and quantity of coarse aggregate added), Product : SikaRep Microcrete-4 or equivalent make in Fosroc/Thermax as approved by GE. Product requirements: compressive strength > 60 N/Sqmm (28 days) according to ASTM C 1107-99 complete all as specified and as directed. |
| 23 | M&L for precast cement concrete 1:2:4, type B1 (Using 20mm graded granite stone aggregate) in landings, cover slabs (for drain ) and similar articles with plain faces and set in cement mortar 1:4 complete all as specifed and directed. |
| 24 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and directed. |
| 25 | M&L for TMT mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to shape required, including cranking, bending spirally for hooping for coulmns, hooking ends and binding with and including mild steel (annealed) not less than 0.9 mm dia or secuing with clips complete all as specified and directed. |
| 26 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finished fair and even without using extra cement on ceiling complete all as specified and as directed. |
| 27 | M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 28 | M&L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement but WPC shall be measured and paid separately against respective item complete all as specified and directed. |
| 29 | Supply only liquid water proofing compound. |
| 30 | M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 31 | M & L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 32 | M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed. |
| 33 | M & L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying two coat of cement base paint on surface of wall/chajja all as specified and directed. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 35 | M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 36 | M&L for glazed ceramic tiles (coloured) 1st quality, 300mm x 450mm x 7mm thick , on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed. |
| 37 | M&L for prepolished 20mm thick Granite slab of approved shade (any colour), as in fixing of urinal partitions, shelves,Corner shelves, window ciils etc of any shape and size includind necessary cutting to required shape and sizes and polishing complete all as specified and as directed. |
| 38 | Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 39 | S & F high-grade premium ceramic or vitereous china designer counter-shunk/undermount/recessed/under-counter wash basin, white or colored, glossy/stain-resistant/non-porous glazed, oval/ round /square / rectangular designer with modern, minimalist and space-saving with rounded edges for safety with min size 540x400x150mm, surface, easy to clean and durable, inclusive of standard coupling hole and waste fittings/ waste coupling exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 40 | S&F 5 to 6mm thick large wall mounted frameless 3D beveled edges designer mirrors tints grey or bronze fixed with screws or mirror clips all included complete all as specified and as directed. Make- Saint-Gobain or Modi Guard glass |
| 41 | S&F in repairs 600mm x 2000mm looking mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood including aluminium framing and fixed to PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified. |
| 42 | S&F SS, premium type, peg set 6, heavy weight complete all as specified and directed. |
| 43 | S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed. |
| 44 | S&F in repair Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 45 | S&F in repairs vitreous china hand basin, white, flat back of size 550mm x 400mm x185 fitted with 32mm bore CP brass waste coupling with long screwed shanks,32mm bore PVC waste pipe,15mm bore & 450mm long PVC connection , (excluding tap, waste chain & plug), complete all as specified. |
| 46 | S&F in repair 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm as spouts or waste pipe for WHB/Kithcen sink etc., fixed complete by cutting hole into or through brick wall built in CM by using appropirate bend or bottle trap, passing another side of wall, connecting to main waste pipe line and making good in CM (1:3) cutting not exceeding 10cm in girth complete all as specified and directed. |
| 47 | S&F 32mm Bottle trap of PTMT for WHB/Kitchen sink etc.. having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. |
| 48 | S&F in repairs tall body pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed. |
| 49 | S&F in repairs vitreous china wash down water closet (Padestal pattern) White, with 'P' or 'S' trap including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device and fixing with all joints including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed. |
| 50 | S & F repair vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing all as specified. |
| 51 | S&F in repairs 15mm bore angle valve, fancy type , chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed. |
| 52 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified. |
| 53 | S& F in repair 15 mm CP 2-in-1 stop cock/bib tap fancy type for fixing of health faucet or jet spray for the WC and complete all as specified and directed. |
| 54 | S&F in repairs Jet Spray with 1 meter PVC Tube , Stainless steel nozzel and fixing plate complete all as specified and as directed. |
| 55 | S&F in repairs Bib taps,cast copper alloy with crutch or butterfly handle, chromium plated, fancy type , screwed for iron pipe or for brass ferrule, for 15 mm bore GI pipe complete all as specified and directed |
| 56 | S&F in repairs 15mm bore stop valve, fancy type , chromium plated cast copper alloy screwed down, high pressure, with long shank and cup (concealed type) with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed. |
| 57 | S&F in repair brass chromium plated overhead shower rose 125mm dia round shape with swivel joints complete all as specified and directed. |
| 58 | S&F in repairs vitreous china half stall urinal Standard, white with grating and union for discharge pipe includng providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws complete with PVC flush pipe complete all as specified and as directed. |
| 59 | S&F in repairs Stainless steel Gratiings 110 mm dia with waste pipe hole complete all as directed. |
| 60 | Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and as directed. |
| 61 | S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 62 | Taking down 15mm bore steel/ composite/ CPVC water tubing and connection from any position wall /ceiling surfaces or concealed including cleaning for re-fixing or removing from site of work complete all as specified and as directed. |
| 63 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 64 | S&F 3- layer PP-R Polypropylene random copolymer) 20mm outer dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded fitting polypropylene laid concealed in floor/wall/ceiling complete all as specified and directed.Note : Work will be done under authorised/concerned company's supervision. |
| 65 | S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and as directed. |
| 66 | M&L water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein from sub serial no. (a) to (f) as below and complete all as specified and as directed :- (a) Cleaning, picking, sweeping and washing down with water and brushing with neat cement slurry @ 3 Kg per Sqm & removing debris to a distance exc 100m & n.exc. 250m. (b) 15 mm thick plastering in cement mortar 1:3 mixed with water proofing compound (to be measured seperately) as per manufacturer instructions finished even & smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 300 ml per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transvers direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm |
| 67 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe inculding dismantling of old water tank with old complete accesorries, complete all as specified and as directed. |
| 68 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe inculding dismantling of old water Tank complete all as specified and as directed. |
| 69 | Dismantling of pipes of any description & any size & bore as in soil, waste or vent pipe including removal of cement joint fixed to wall or laid in floor complete all as specified and as directed. |
| 70 | S&F 100mm bore UPVC (SCH - 80) grading pipes as in soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including packing under and haunching against the sides complete all as specified and as directed. |
| 71 | S&F 75mm bore UPVC (SCH - 80) grading pipes as in soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including packing under and haunching against the sides complete all as specified and as directed. |
| 72 | S&F 100 mm bore UPVC Bends Heavy duty (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed |
| 73 | S&F 75 mm bore UPVC Bends Heavy duty (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed |
| 74 | S&F 100 mm bore UPVC Branch pieces, heavy duty single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 75 | S&F 75 mm bore UPVC Branch pieces, heavy duty single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed |
| 76 | S&F 110mm bore PVC (SWR) pipes in any length jointed with solvent cement joints / rubber ring joints fixed to walls with necessary clamps as in RWP pipes complete all as specified. |
| 77 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified. |
| 78 | S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain grating with/without hole including jointing to waste pipe with solvent cement complete all as specified and directed. |
| 79 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and complete all as specified and as directed. |
| 80 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all secified and as directed. |
| 81 | M & L 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement complete all secified and as directed. |
| 82 | M&L broken stone or boulders for hard core of guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all secified and as directed. |
| 83 | M&L for 75 mm thick cement concrete type D2, 1:4:8 using 40mm graded stone aggregates as sub base to floor, complete all secified and as directed. |
| 84 | M&L for Machine pressed precast conctete coloured interlocking paver block any shape and size fixed with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed. |
| 85 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 86 | M&L PCC type C1, 1:3:6 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, hold fast blocks, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 87 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 88 | S&F of steel work in tubular trusses and tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zinc chromate primer paint including preparation of surface complete all secified and as directed. |
| 89 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 90 | M&L preparation of new steel or Iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 91 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges hips valleys as in roof covering complete all as specified and as directed. |
| 92 | S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all secified and as directed. |
| 93 | S&F of pre painted galvatume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all secified and as directed. |
| 94 | Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed. |
| 95 | M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel box covered with and including modular covered plated and frame all as specified & directed. |
| 96 | All as per srl item No. 95.00 (here-in-before) but for 15 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed. |
| 97 | S&F modular type switch, single pole, one way, 5 Amp, 230 Volts. |
| 98 | S&F modular type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed. |
| 99 | S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 100 | S&F LED light fitting 1x22W, regal batten for LED including ultra bright glass LED Tubelight with very high efficacy, single / double side connection all as specified and directed. |
| 101 | S&F in reapir of security light 36 watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed. |
| 102 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers omplete all as specified and directed. |
| 103 | S&F in repair of factory made epoxy polyester powder coated distribution board TP & N 4 way (TPN DB) double door (IP-43 protection) fabricated from minimum 2.0 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for TPN as incommer and outgoing MCBs as required at site complete all as specified and conforming to IS: 8623 along with cable end box complete all as specified and directed. NOTE :- (a) TPN and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/ thimbles/ sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 104 | S&F in repair of sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed. |
| 105 | S&F 415V 10KA 'B' curve miniature circuit breaker (MCB) TPN of following poles and current carrying capacity in the DB complete with connection testing and commissioning of capacity 32 Amps complete all as specified and directed. |
| 106 | S&F in repair of MCB SPN, 240 Volts, 40 Amps breaking capacity 10 KA complete all as specified and directed. |
| 107 | S&F in repair of MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed. |
| 108 | S&F in repair of sheet metal enclosure with plug and sockect including MCB 20 amps rated 240 volts complete all as specified and directed. |
| 109 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed. |
| 110 | Supply and fix electric water heater, storage type steel body with and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 111 | Supply and fixing for CPVC tubing medium grade including all fitting of size 16mm bore including making holes/nitch for fitting of pipe and making good disturbed surface to match with existing surface and finish complete all as specified and directed. |
| 112 | Supplying, laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of size 10 sqmm 2 core all as specified and directed. Note :- Cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge. |
| 113 | Supply and laying double wall corrugated pipe (DWC) in replacement conforming to IS 19430 Part - I of size 50mm outer dia and 38 mm inner dia complete all as specified and as directed. |
| 114 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for laying of cable etc, and for foundation of poles, stays etc. not exc 10sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 115 | M&L for returning filling in approved excavated soil including spreading levelling and well ramming in layers n.exc 25cm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender