Tender For Repair/ Replacement Certain B/R Repair Works At Various Bldgs And Installations Of Mes At Jutogh Cantt Under Ge (I) Jutogh
Tender Value
25 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Certain B/R Repair Works At Various Bldgs And Installations Of Mes At Jutogh Cantt Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor hearth or wall tiling/ stone slab including cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. |
| 2 | M&L for non skid ceramic tiles 7-8mm thick coloured (square/ rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. |
| 3 | M&L for joint free non skid glazed ceramic tiles (coloured) 400x400x7 to 8mm thick (square/ rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6), complete all as specified and directed. |
| 4 | M&L for wall cladding/ wall tiles glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm /300x200x6to7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 5 | M&L for vitrified ceramic tiles 10mm thick coloured (Square/ rectangular)dark shade joint free area of each tiles n exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed as in CM 1:6, complete all as specified and directed. |
| 6 | M&L for vitrified ceramic tiles 10mm thick coloured (Square/ rectangular) dark shade joint free area of each tiles n exc 0.36 sqm in vertical surface such as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10mm thick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 7 | Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed. |
| 8 | Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm each complete all as specified and directed. |
| 9 | Taking down shutters of any description exc 1 Sqm each and n exc 2 Sqm each, complete all as specified and directed. |
| 10 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repairs, complete all as specified and directed. |
| 11 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 12 | S&F anodized powder coated (powder coating color/shade as approved by GE) aluminium frame/ shutters for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing and cleat for receiving glass/wire mesh etc., complete all as specified and directed. |
| 13 | S&F aluminium anodised powder coated sliding type two/ three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00x31.75x1.3 mm thick for top and sides, 93.00x31.75x1.3mm thick, bottom and shutter frame 38x18x1.5mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc., complete all as specified and directed. |
| 14 | S&F aluminum section powder coated (powder coating color/shade as approved by GE) of colour as approved door with frame and shutters partially gauze and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter, complete all as specified and directed. |
| 15 | S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length and making it good to match with existing surface, complete all as specified and directed. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial types on both sides including teak wood beading around the shutters, complete all as specified and directed. |
| 18 | S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. sized of members of shutter with three number of panels, complete all as specified and directed. |
| 19 | S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanized wire staples fixed with wooden beading, complete all as specified and directed. |
| 20 | S&F in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanized wire staples fixed with wooden beading, complete all as specified and directed. |
| 21 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 22 | S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 23 | S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sqm in each pane, complete all as specified and directed. |
| 24 | M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 25 | M&L for preparation of old wooden surfaces not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 26 | S&F mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long, complete all as specified and directed. |
| 27 | S&F 300mm Mild Steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 28 | S&F aluminium extruded alloy handles fabricated type anodised 125mm long, complete all as specified and directed. |
| 29 | S&F aluminium extruded alloy handles fabricated type anodised 100mm long, complete all as specified and directed. |
| 30 | S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size, complete all as specified and directed. |
| 31 | S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed. |
| 32 | S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long, complete all as specified and directed. |
| 33 | S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long, complete all as specified and directed. |
| 34 | S&F in repair floor door stoppers 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors, complete all as specified and directed. |
| 35 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 36 | M&L for RCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in chajja repair at any height including providing and erecting at site conventional steel double scaffolding to reach at any height/any place of work on the external façade of the building including approaches, extensions, working platforms, ladders, lifting tackle for men and materials etc all complete, inclusive of covering by hessian cloth or tarpaulins, dismantling and taking away all materials after the completion of proposed work etc., complete all as specified and directed. |
| 37 | M&L for formwork to flat rough finished surface of concrete for chullah hoods, chajjas, troughs and similar items including edges any height, complete all as specified and as directed. |
| 38 | M&L for reinforced cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in columns/ beams /slab, landings and in shelves and the like, complete all as specified and directed. |
| 39 | Formwork to flat rough finished concrete surfaces, soffits of suspended slabs, roof slabs, landings and similar work, complete all as specified and directed. |
| 40 | M&L for form work to edges of concrete flats, openings, floors & roofs and sides of RCC/ PCC bands in walls and similar work exceeding 5cm but not exceeding 10cm wide for rough finished surfaces of concrete, complete all as specified and directed. |
| 41 | S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia, complete all as specified and directed. |
| 42 | Demolition of brick or stone masonry built in cement mortar including all quoins arches, pillars, etc but excluding ashlars facing, dressed stone work and precast concrete block, at any height, complete all as specified and directed. |
| 43 | M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6, complete all as specified and directed. |
| 44 | M&L for brick work with sub class 'B' brick in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall built, complete all as specified and directed. |
| 45 | M&L for walling of random rubble stone masonry, brought up to courses, well bonded, bedded and solidly hearted built in cement mortar 1:6, including raking or cutting out joints, complete all as specified and directed. |
| 46 | Taking down cement or cement lime plaster, of any description including tiling etc., complete all as specified and directed. |
| 47 | M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth, complete all as specified and directed. |
| 48 | M&L for rendering work 15 mm thick on fair surfaces of brickwork or concrete surfaces 1:4, finished even and smooth (without using extra cement) mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type), complete all as specified and directed. |
| 49 | M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a coat 1-2mm wall care of putty on walls, complete all as specified and directed. |
| 50 | M&L for preparation of plastered or unplastered old decorated surfaces of walls including pilasters and cornices etc. including washing, rubbing down and stopping the connected previously treated surfaces and applying two coat of oil emulsion distemper (tint as approved by GE) including wherever required fillings of gaps ,holes, patches with wall care putty of existing surface with sand paper or iron patti / flat complete all as specified and directed. |
| 51 | M&L for 3mm thick exterior wall care putty on wall surface, complete all as specified and directed. |
| 52 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/Liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building/ tower complete all as specified and directed. |
| 53 | M&L for preparation of newly plastered surface of wall & applying two coats of cement based paint, complete all as specified and directed. |
| 54 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/Liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over old surfaces at any height of building/ tower complete all as specified and directed. |
| 55 | M&L for preparation of old plastered surface of wall & applying two coats of cement based paint, complete all as specified and directed. |
| 56 | Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed. |
| 57 | Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed. |
| 58 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 59 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore, complete all as specified and directed. |
| 60 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore, complete all as specified and directed. |
| 61 | S&F rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I etc., complete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 62 | S&F rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I etc., complete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 63 | S&F 21-22 inch dia galvanised mild steel pan mortar (Tasla/ ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover, complete all as specified and directed. |
| 64 | S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions and fixed, complete all as specified and directed. |
| 65 | S&F in repair 15mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed. |
| 66 | S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 67 | S &F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type fixed, complete all as specified and directed. |
| 68 | S&F in repair 15mm brass CP wash hand basin/ kitchen sink mixer/wall mixer for mixing hot and cold water, complete all as specified and directed. |
| 69 | S&F in repair of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing, complete all as specified and directed. |
| 70 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 71 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed. |
| 72 | S& F in repairs 15mm size PVC connection pipe with PTMT nuts of length 600mm long, complete all as specified and directed. |
| 73 | S& F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts, complete all as specified and directed. |
| 74 | S&F in repair EWC vitreous china wash down water closet pan pedestal pattern white with complete fitting including P Trap/S Trap, jet spray and fixing with brass screw, complete all as specified and directed. |
| 75 | S&F plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed. |
| 76 | S&F in repair vitreous china squatting pan, Orissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc(excluding flushing cistern and flush pipe, complete all as specified and directed. |
| 77 | S&F in repair PVC low level flushing cistern 10 Ltr capacity valve less symphonic action type white as approved with ball valve flat back & handle including brackets, complete all as specified and directed. |
| 78 | S&F in repair wash basins, vitreous china (flat back or angle back type) size 550x400mm white , including cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length, complete all as specified and directed. |
| 79 | S&F 5mm thick looking mirror with 6mm thick back ply wood and wooden frame complete of size 600 x 450mm including plugging on wall and fixed, complete all as specified and directed. |
| 80 | Taking down PVC pipe of any dia up to 110mm and description including all fitting, complete all as specified and directed. |
| 81 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 82 | S&F for PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and directed. |
| 83 | S&F PVC 'P' or 'S' traps of 110 mm bore pipe, complete all as specified and directed. |
| 84 | S&F PVC SWR cowl 110 mm bore pipe, complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends any radius 110 mm, complete all as specified and directed. |
| 86 | S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 87 | S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends any radius 75 mm dia, complete all as specified and directed. |
| 89 | M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 90 | Dismantling boarding any description, fixed in any position with nails for cupboards, complete all as specified and directed. |
| 91 | S&F prelaminated particle board, 18mm thick, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work and including beading, complete all as specified and directed. |
| 92 | S&F Hasp and staple, safety type, of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size, complete all as specified and directed. |
| 93 | S&F continuous piano hinges mild steel bright finish or electro galvanised with open flap width 30mm, fixed with screw, complete all as specified and directed. |
| 94 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, complete all as specified and directed. |
| 95 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness including Nainital pattern roof covering, fixed with J/L hooks or coach screws, complete all as specified and directed. |
| 96 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 97 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 98 | S&F 0.50mm thick prepainted aluminium zinc coating liner profile high strength steel sheet in an attractive, slightly fitted wall & ceiling cladding for exterior and interior use, on straight or curved surface, complete all as specified and directed. |
| 99 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 100 | Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section ,in any position in any position with nails etc., complete all as specified and directed. |
| 101 | Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in section in any position with nails etc., complete all as specified and directed. |
| 102 | S&F mild steel work in roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W, (Gde-E- 250), quality-A, etc., complete all as specified and directed. |
| 103 | S&F mild steel framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of water tanks staging and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 104 | M&L for 2nd class hardwood clean Sawn timber scantling/ posts, complete all as specified and directed. |
| 105 | M&L for plain fillets of second class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, complete all as specified and directed. |
| 106 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 107 | M&L for preparation of old steel surface of any description over 10cm in width or girth and applying one coat synthetic enamel paint complete all as specified and directed. |
| 108 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr n. exc. 500 ltr, complete all as specified and directed. |
| 109 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 110 | Dismantling of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, cooking platform etc., complete all as specified and directed. |
| 111 | M&L for 18-20mm thick granite (of any type) work table rubbed and polished) in pillar/ vertical surface, cooking platform and like in 15mm thick screed bed CM 1:4, including edges of stones slabs one edges such as cooking steps or etc, moulding, pointing in white cement 1:2, using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 112 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, over 10mm thick rendering as in CM 1:3 and other similar situations, complete all as specified and directed. |
| 113 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid & dado and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete over and including 15 mm thick screed bed or bedding with CM 1:6, etc., complete all as specified and directed.Note:- (i) The rate of kota stone shall be deemed to including for full rounded off corner/ edges including holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to including for cutting and polishing machine and kota polishing to achieve the desired granite finish. |
| 114 | M&L for machine cut kota stone slab 20-25mm thick in riser steps, skirting, dado, nosing and pillar over 10mm thick cement screed base laid with CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, etc., complete all as specified and directed.Note:- (i) The rate of kota stone shall be deemed to including for full rounded off corner/ edges/ nosing including holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to including for cutting and polishing machine and kota polishing to achieve the desired finish. |
| 115 | M&L for 75mm thick, PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base of flooring, complete all as specified and directed. |
| 116 | M&L for chequered cement concrete tiles pre polished lacquer and glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 117 | M&L for cement concrete 1:3:6, type C-2, 75mm thick as in plinth protection path etc., complete all as specified and directed. |
| 118 | M&L for 40mm thick cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as base coarse for floors, complete all as specified and directed. |
| 119 | M&L for mild steel works as in bends straps, hold fasts etc, conforming to IS-206, (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed. |
| 120 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains including fair finished & necessary formwork, complete all as specified and directed. |
| 121 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets, complete all as specified and directed. |
| 122 | S&F false ceiling at all height will GRG(Glass reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 TO 0.75 As per 8225:198/, Non combustible as per BS 4/6 (Part 4)19/10 and reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120grams per sqm icl both sides) comprising of main T runners of size 5x32mm of length 3000mm, cross T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to from grid module of size 300x600mm, suspended from ceiling using galvanized mild stell items (galvanizing @grams per sqm)i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ portion with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions, with perforated 12mm thick nicro tegular edged GRG false ceiling tiles including hanging hanger, complete all as specified and directed. |
| 123 | M&L solid PVC sheet as in wall/ ceiling lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as pe specifications and drawing including necessary beading work with same board beading for joint sealed, complete all as specified and directed. |
| 124 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification, complete all as specified and directed. |
| 125 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 500 Ltr nexc.1000 ltr, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 126 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 500 Ltr nexc.1000 ltr, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender