Tender For special Repair To Roof Joinery Flooring, Sanitary Items And Allied Works In Qtr No. 1069/3 & 04, 1070/3 & 4 And 1071/3 & 4 In Sse Under Age B/R-Ii At Army Area Jodhpur Under Ge (Army) No. 01
Tender Value
41 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
21 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Roof Joinery Flooring, Sanitary Items And Allied Works In Qtr No. 1069/3 & 04, 1070/3 & 4 And 1071/3 & 4 In Sse Under Age B/R-Ii At Army Area Jodhpur Under Ge (Army) No. 01
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frames with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each complete all as specified and directed by Engr-in-charges. |
| 2 | Taking down chowkat or frames with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc4.0 sqm each complete all as specified and directed by Engr-in-charges. |
| 3 | S & F Factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkkat of size 45x85 mm comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mmiter joints after applying PVC solvent cement and screwed with full dody threaded star headed SS screws having minimum density of 750 kg/cum screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixed in positin with suitable MS hold fast /lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charges. |
| 4 | S & F Factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum nd screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , odulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixing with stainless steel butt hinges of required ie with necessary full body threaded star headed counter sunk SS screws, all as per direction of engr-in-charge complete all as directed |
| 5 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-charges. |
| 6 | S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-charges. |
| 7 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed by Engr-in-charges. |
| 8 | S&F 150 mm long Aluminium handles, cast type, anodised , complete all as specified and directed by Engr-in-charges. |
| 9 | Taking up or down GI steel /CPVC water tubing 15 mm bore and connection, including cleaning for refixing or remove to site. complete all as specified and directed by Engr-in-charges. |
| 10 | Taking up or down GI tubing/CPVC 20/25 mm bore and connection, including cleaning for refixing or remove to site. complete all as specified and directed by Engr-in-charges. |
| 11 | Supply & Fixing CPVC pipe having outer dia 20mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor complete all as specified and directed by Engr-in-charges. |
| 12 | Supply & Fixing CPVC pipe having outer dia 25mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor complete all as specified and directed by Engr-in-charges. |
| 13 | S&F brass elbow suitable for CPVC pipes outer dia 20 mm complete all as specified and directed by Engr-in-charges. |
| 14 | S&F brass elbow suitable for CPVC pipes outer dia 25 mm complete all as specified and directed by Engr-in-charges. |
| 15 | S&F brass tee suitable for CPVC pipes outer dia 20 mm complete all as specified and directed by Engr-in-charges. |
| 16 | S&F brass tee suitable for CPVC pipes outer dia 25 mm complete all as specified and directed by Engr-in-charges. |
| 17 | S&F male brass threaded adaptor (MTA/MBTA) suitable for 25 mm pipe complete all as specified and directed by Engr-in-charges. |
| 18 | Dismantling existing water tank of capacity exceeding 250ltrs and not exc 500 ltrs and removing from site. complete all as specified and directed by Engr-in-charges. |
| 19 | S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) white, in colour hoisted and fixed in position all as directed of capacity 1000ltrs a Including 20mm bore brass ball valve high pressure with polythene float complete all as specified and directed by Engr-in-charges. |
| 20 | Taking down cement plaster on stone masonary RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engr-in-charges. |
| 21 | M&L for 15mm thick rendering in CM 1:6 on stone masonary finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 22 | M&L 15mm thick rendering in CM 1:4 on stone masonary surface or other than fair face of brick work or on one side of lathing stone masonary surface faces finished the surfaces even & smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 23 | M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chajja etc all as directed & finished even & smooth complete all as specified and directed by Engr-in-charges. |
| 24 | Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr-in-charges. |
| 25 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 26 | M&L for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed by Engr-in-charges. |
| 27 | M&L for three coats of white wash including preparation of new surfaces of walls complete all as specified and directed by Engr-in-charges. |
| 28 | M&L for three coats of white wash including preparation of new surfaces as on ceilings complete all as specified and directed by Engr-in-charges. |
| 29 | M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed by Engr-in-charges. |
| 30 | M&L for one coat of white wash including preparation of old surfaces as on ceilings complete all as specified and directed by Engr-in-charges. |
| 31 | M& L for Preparation of new surfaces of walls plastered /pointed & applying two coats of exterior emulsion paint over a coat of suitable primer, complete all as specified and directed by Engr-in-charges. |
| 32 | M&L for fabrication of powder coated Anodised aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as specified and directed by Engr-in-charges. Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately, |
| 33 | M&L for Pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators. complete all as specified and directed by Engr-in-charges. |
| 34 | M&L for Pre powder coated aluminium window shutters prepared for sliding or hanging etc including handles, tower bolt and hinges complete using section having wt not exc 0.55 kg/RM complete all as specified and directed by Engr-in-charges. |
| 35 | M&L for 4.80 mm thick plain Sheet glass tinted , ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charges. |
| 36 | M& L for 4 mm thick pin headed figured glass and glazing with oil putty in squares n exc 0.55q m in each pane in small widths as in louvers of ventilators complete all as specified and directed by Engr-in-charges. |
| 37 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc complete all as specified and directed by Engr-in-charges. |
| 38 | Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land. complete all as specified and directed by Engr-in-charges. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engr-in-charges. |
| 40 | M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified and directed by Engr-in-charges. |
| 41 | M&L for coloured glazed ceramic tiles 300mmx450mmx6mm thick as per IS 13712 Grade II over 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified and directed by Engr-in-charges. |
| 42 | M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floor etc over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-charges. |
| 43 | M&L for Virified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in complete all as specified and directed by Engr-in-charges. floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match |
| 44 | All as per item no 43 above but on skirting dado over 10mm thick cement plaster in CM 1:4 complete all as specified and directed by Engr-in-charges. |
| 45 | M & L for 18-20 mm thick Black granite stone as in cooking platforms ,counter slab slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite& providing necessary holes for gas pipe / water supply pipes etc complete all as specified and directed by Engr-in-charges. |
| 46 | M&L for Pressed steel frames for doors 165 x 60mm size fabricated with 1.00mm thick sheet with rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-charges. |
| 47 | M&L for Pressed steel frames for doors size 105x60mm with one rebate including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engr-in-charges. |
| 48 | M&L for PCC 1:3:6 type C1 using 20 mm graded stone agg as in filling under pressed steel door frames & hold fasy blocks etc complete all as specified and directed by Engr-in-charges. |
| 49 | M&L for 35mm thick flush shutters, solid core construction with block board core and veenerd face fixed on both side of door, coloured as approved by GE, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed by Engr-in-charges. |
| 50 | S&F 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (withoutsash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-charges. |
| 51 | S&F of hinges, medium weight, cold rolled mild steel, and fixed of size 125 mm size. complete all as specified and directed by Engr-in-charges. |
| 52 | S&F of mild steel barrel tower bolt 150 mm long stove enamelled black with bright bolt complete all as specified and directed by Engr-in-charges. |
| 53 | S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design complete all as specified and directed by Engr-in-charges. |
| 54 | S&F of mild steel sliding door bolt Plate type 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engr-in-charges. |
| 55 | S&F in repair 150mm double action spring hinge, brass with phosphor bronze wire spring bright polished complete all as specified and directed by Engr-in-charges. |
| 56 | S&F 140mm floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-charges. |
| 57 | M&L for prep of the new surfaces of steel & applying two coats of syn enamel paint over one coat of red oxide primer over 10Cm width or girth not other wise described complete all as specified and directed by Engr-in-charges. |
| 58 | M&L for one coat of synthetic enamel paint on old steel surface including preparation of surface, over 10Cm width or girth not other wiae described complete all as specified and directed by Engr-in-charges. |
| 59 | M&L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation of surface, not other wise described over 10Cm width or girth complete all as specified and directed by Engr-in-charges. |
| 60 | M&L for one coat of synthetic enamel paint on old wooden surface including preparation of surface, not other wise described over 10Cm width or girth complete all as specified and directed by Engr-in-charges. |
| 61 | S&F in repair of bibcock 15mm dia, cast copper alloy fancy type, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-charges. |
| 62 | S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union. complete all as specified and directed by Engr-in-charges. |
| 63 | S&F in repairs angular stop valves cast copper alloy chromium plated(ISI marked) screwed down high pressure fancy type with crutch or butterfly handle screwed both ends for 15mm bore of iron pipe or union complete all as specified and directed by Engr-in-charges. |
| 64 | S&F in repair concealed stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair complete all as specified and directed by Engr-in-charges. |
| 65 | S&F Pillar taps 15mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe. complete all as specified and directed by Engr-in-charges. |
| 66 | S&F 600mmx450mm bevelled edge mirror of selected quality glass 5.5 mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 67 | S&F Corner Glass shelf 250mm superior quality with CP tubular framing & brackets complete all as per sample. complete all as specified and directed by Engr-in-charges. |
| 68 | S&F MS chromium plated peg set of five fixing with wall complete complete all as specified and directed by Engr-in-charges. |
| 69 | M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate. complete all as specified and directed by Engr-in-charges. |
| 70 | S&F tubular towel rail 20mm dia anodised aluminium `D' type 60cm long with bracket and fixed complete all as specified and directed by Engr-in-charges. |
| 71 | S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end (As approved by Engr -in-charge). complete all as specified and directed by Engr-in-charges. |
| 72 | Demolition of reinforced cement concrete including cutting to reinforcement as required to facilitate demolition as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimneys and similar suspended work. complete all as specified and directed by Engr-in-charges. |
| 73 | S&F in repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely complete all as specified and directed by Engr-in-charges. |
| 74 | Dismentling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc complete all as specified and directed by Engr-in-charges. |
| 75 | Dismentling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc complete all as specified and directed by Engr-in-charges. |
| 76 | Supplying and laying of 75 mm dia PVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified and directed by Engr-in-charges. (with all fitting) |
| 77 | Supplying and laying of 110 mm dia PVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified and directed by Engr-in-charges. (with all fitting) |
| 78 | S&F 75 mm bore PVC bends any radius with oval acess door complete all as specified and directed by Engr-in-charges. |
| 79 | S&F 110 mm bore PVC bends any radius with oval acess door complete all as specified and directed by Engr-in-charges. |
| 80 | S&F for 100mm dia PVC (SWR) Vent cowls, diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr-in-charges. |
| 81 | M&L for PVC (SWR) branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore. complete all as specified and directed by Engr-in-charges. |
| 82 | M&L for PVC (SWR) branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore. complete all as specified and directed by Engr-in-charges. |
| 83 | Supply and fixing in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed and complete all as specified and directed by Engr-in-charges. |
| 84 | S&F in repair 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified and directed by Engr-in-charges. |
| 85 | S&F Kitchen sink Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers wastepipe, cast iron cantilever brackets,connecting union overall size915mmx460mm with bowl size 410mm x330mm x 160mm including brass waste coupling, PVC wastepipe complete all as specified and directed by Engr-in-charges. |
| 86 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding/roof kerb/sunken floor etc.) including tarfelt, plaster etc. and removing from site complete all as specified and directed by Engr-in-charges. |
| 87 | M&L for 40mm averge thickness plain cement concrete 1:2:4 type B-0 (using 12.50mm graded stone agg) over roof for making good depression/undulation and as in roof kerb to match the existing. complete all as specified and directed by Engr-in-charges. |
| 88 | M&L for applying two coat of undiluted thick water based UV resistant elastomeric Polyurethane liquid membrane with UV resistance properties and solar reflective properties of 109 over one coat of primer (1:3, Dilution:water) Note every each coat interval between 6 hrs including fibremesh of 40 GSM sandwich between two coats for better reinforcement) having solid content more than 80% and elastic recovery @ 150 % elongation % - 70 to 75 with elongation of 400% complete all as specified and directed. Work to be executed by company's authorised applicator only. complete all as specified and directed by Engr-in-charges. |
| 89 | Supply only integral water proofing compound (ISI marked). complete all as specified and directed by Engr-in-charges. |
| 90 | Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary Scaffolding etc complete all as specified and directed by Engr-in-charges. |
| 91 | M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of to remove the loose rust particles etc & throughly cleaning the surface. complete all as specified and directed by Engr-in-charges. |
| 92 | M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack. complete all as specified and directed by Engr-in-charges. |
| 93 | M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. complete all as specified and directed by Engr-in-charges. |
| 94 | M&L for 10 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement complete all as specified and directed by Engr-in-charges. |
| 95 | Demolition of reinforced cement concrete (reinfor cement cut as required to facilitate demolition) of any description for roof,colums ,beam of any type etc complete all as specified and directed by Engr-in-charges. (removing demolished material outside MD land). |
| 96 | M&L for 15 mm thick rendering on floor and vertical side of sunken floor of stone masonry surfaces/brick work/concrete surfaces in CM (1:3) mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement and finished even and smooth without using extra cement and applying a coat of bitumen 30/40 @ 1.50 kg/sqm and laying 200 micron polythene film complete all as specified and directed by Engr-in-charges.NOTE:- Liquid water proofing compound shall be measured and paid for separately as “Supply only”. |
| 97 | M&L for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete/sunken floors complete all as specified and directed by Engr-in-charges. |
| 98 | M&L for Mild steel framed work as in guard bars brackets & supports for sunshades roof slabs etc for jacketting around columns,as in railings ,supports for cooler platforms & the likes etc using MS angle iron, sq pipes flat iron , MS plates & bolts etc complete all as specified & directed incl necessary welding in position etc, complete all as specified and directed by Engr-in-charges. |
| 99 | M&L for 18 mm thick solid PVC sheet in one or two different colours( with wood grain printed pattern/ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified and directed by Engr-in-charges. |
| 100 | S&F 0 degree clip type self closing hinges for cabinets fixed with cadimum coated screws complete all as specified and directed by Engr-in-charges. |
| 101 | S&F 100 mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters complete all as specified and directed by Engr-in-charges. |
| 102 | S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and directed by Engr-in-charges. |
| 103 | S&F as in repairs stainless steel plate rack of size 30\\"x24\\"x10\\" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as specified and directed by Engr-in-charges. kept in GE's office . |
| 104 | M&L Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with retro reflective tap over 18 mm thick PVC sheet complete all as specified and directed by Engr-in-charges. |
| 105 | S&F in repair Soap Dish fixed to plugs chromium plated screws complete all as specified and directed by Engr-in-charges. |
| 106 | Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete all as specified and directed by Engr-in-charges. |
| 107 | Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing complete all as specified and directed by Engr-in-charges. |
| 108 | M&L for Point wiring (Concealed) using approved colour coding as per IS Red Black and green for single phase circuits) with multi stranded copper conductor 1.5 Sqmm nominal cross area single core PVC insulated and unsheathed FR LSH cable 1100 Volts grade ISI 694 marked with valid CML No. in and including medium grade PVC concealed conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for wall/roof /floor etc with pressed flush metal boxes covered with inner plates & outer plates etc suitable for mounting of Modular switches & sockets including PVC insulated multi stranded copper conductor FRLS 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continully conductor to commonearth and connecting to earrth dolly complete all as specified and directed for the follwing (a) One light point controlled by one, one way switch complete all as specified and directed by Engr-in-charges. |
| 109 | (b) One fan /Exhaust fan, point controlled by one way switch. |
| 110 | (c) One socket outlet 3 pin 6 Amps on same board |
| 111 | (d) One socket outlet 3 pin 6 Amp on independent board |
| 112 | (e) One bell point controlled by one bell push. |
| 113 | (f) One light point controlled by two, two-way switches |
| 114 | All as per item No 108 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board . complete all as specified and directed by Engr-in-charges. |
| 115 | S&F Modular switch flush type single pole one way 5 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 116 | S&F Modular switch flush type single pole one way 15 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 117 | Supply & fix Modular Fix only switch flush type single pole two way 5 Amp 1 module ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 118 | supply & Fix Modular bell push, flush type, 5 Amp 1 module ISI Marked complete all as specified and directed by Engr-in-charges. |
| 119 | Supply and fix bell, AC 230 volts, single pole Multi tune type . complete all as specified and directed by Engr-in-charges. |
| 120 | S&F Modular socket outlet 2 in 1, 5 pin, 5 Amp flush type complete all as specified and directed by Engr-in-charges. |
| 121 | S&F Modular socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 122 | Supply and fix modular socketed stepped type electonic fan regulator flush type. 120W-2 module complete all as specified and directed by Engr-in-charges. |
| 123 | M&L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body. complete all as specified and directed by Engr-in-charges. |
| 124 | M&L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting. complete all as specified and directed by Engr-in-charges. |
| 125 | Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charges. |
| 126 | Taking down and re-fixing only exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed by Engr-in-charges. |
| 127 | S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charge. |
| 128 | S&F sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for With one No 100 Amp 10 KA TPN as incoming complete all as specified and directed by Engr-in-charge. |
| 129 | Supply and Fix MCB 240V, 10KA Single pole\\"C\\" series 5-32 Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 130 | Supply and Fix MCB 240V, 10KA, Single pole & neutral \\"C\\" series 63. Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 131 | Supply and fixing MCB 415V, 10KA TPN C Curve 100 Amps. complete all as specified and directed by Engr-in-charges. |
| 132 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charges. |
| 133 | S&F Decorative wall light made up of high grade engineering material suitable for 9 W LED lamp. complete all as specified and directed by Engr-in-charges. |
| 134 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed by Engr-in-charges. |
| 135 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charges. |
| 136 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified and directed by Engr-in-charges. |
| 137 | M&L in repairs sub main wiring with PVC insulated and unsheathed 4x 6 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- four runs of cable 6 Sqmm and One run of Sqmm along with conduit shall be measured as one unit length. |
| 138 | M&L in repairs sub main wiring with PVC insulated and unsheathed 4 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit , concealing in walls ( by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- Two runs of cable 4 Sqmm and One run of 4 Sqmm along with conduit shall be measured as one unit length. |
| 139 | Supply and fixing of sheet metal enclosure SPN 240V with a two pin earth plug and socket with metal cladd top and one MCB,SP 20amps capacity complete all as specified and directed by Engr-in-charges. |
| 140 | Taking down and re-fixing only incl connecting electric meters upto 25 Amps complete all as specified and directed by Engr-in-charges. |
| 141 | M&L for Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc complete all as specified and directed by Engr-in-charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender